devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yulin Lu <luyulin@eswincomputing.com>
To: linus.walleij@linaro.org, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	kees@kernel.org, gustavoars@kernel.org, brgl@bgdev.pl,
	linux-hardening@vger.kernel.org
Cc: ningyu@eswincomputing.com, zhengyu@eswincomputing.com,
	linmin@eswincomputing.com, huangyifeng@eswincomputing.com,
	fenglin@eswincomputing.com, lianghujun@eswincomputing.com,
	Yulin Lu <luyulin@eswincomputing.com>
Subject: [PATCH v3 0/2] ESWIN EIC7700 pinctrl driver
Date: Wed, 14 May 2025 16:09:28 +0800	[thread overview]
Message-ID: <20250514080928.385-1-luyulin@eswincomputing.com> (raw)

  Implements support for the Eswin eic7700 SoC pinctrl controller.
  Provides API to manage pinctrl for the eic7700 SoC.
  Integration with the Linux pinctrl subsystem for consistency and
  scalability.

  Supported chips:
    Eswin eic7700 SoC.

  Test:
    Tested this patch on the Sifive HiFive Premier P550 (which uses
    the EIC7700 SoC), including system boot, networking, EMMC, display,
    and other peripherals. The drivers for these modules all use the
    pinctrl module, so this verifies that this pinctrl driver
    patch is working properly.

---
Changes since V2:
- Address the comments from Krzysztof Kozlowski, some commit information are modified.
- Fixed some errors and warnings reported by the kernel test robot.
- Modified the usage of some labels and syntax in the YAML file, as well as the usage
  of the dev_err_probe function, to make their application scenarios more accurate.
- Link: https://lore.kernel.org/all/20250506090844.1516-1-luyulin@eswincomputing.com/

Changes since V1:
- Made overall modifications to the driver structure and the DTS writing style.
- Link: https://lore.kernel.org/all/20250325141311.758787-1-emil.renner.berthing@canonical.com/

Yulin Lu (2):
  dt-bindings: pinctrl: eswin: Document for EIC7700 SoC
  pinctrl: eswin: Add EIC7700 pinctrl driver

 .../pinctrl/eswin,eic7700-pinctrl.yaml        | 157 ++++
 drivers/pinctrl/Kconfig                       |  11 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-eic7700.c             | 702 ++++++++++++++++++
 4 files changed, 871 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
 create mode 100644 drivers/pinctrl/pinctrl-eic7700.c

-- 
2.25.1


             reply	other threads:[~2025-05-14  8:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-14  8:09 Yulin Lu [this message]
2025-05-14  8:11 ` [PATCH v3 1/2] dt-bindings: pinctrl: eswin: Document for EIC7700 SoC Yulin Lu
2025-05-14 10:30   ` Krzysztof Kozlowski
2025-05-14  8:12 ` [PATCH v3 2/2] pinctrl: eswin: Add EIC7700 pinctrl driver Yulin Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250514080928.385-1-luyulin@eswincomputing.com \
    --to=luyulin@eswincomputing.com \
    --cc=brgl@bgdev.pl \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fenglin@eswincomputing.com \
    --cc=gustavoars@kernel.org \
    --cc=huangyifeng@eswincomputing.com \
    --cc=kees@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lianghujun@eswincomputing.com \
    --cc=linmin@eswincomputing.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ningyu@eswincomputing.com \
    --cc=robh@kernel.org \
    --cc=zhengyu@eswincomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).