From: dongxuyang@eswincomputing.com
To: ulf.hansson@linaro.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, linux-mmc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
adrian.hunter@intel.com, p.zabel@pengutronix.de,
shanchun1218@gmail.com
Cc: ningyu@eswincomputing.com, linmin@eswincomputing.com,
xuxiang@eswincomputing.com,
Xuyang Dong <dongxuyang@eswincomputing.com>
Subject: [PATCH v1 1/2] dt-bindings: sdhci: eswin: Documentation for eic7700 SoC
Date: Fri, 16 May 2025 17:16:50 +0800 [thread overview]
Message-ID: <20250516091650.832-1-dongxuyang@eswincomputing.com> (raw)
In-Reply-To: <20250516091259.774-1-dongxuyang@eswincomputing.com>
From: Xuyang Dong <dongxuyang@eswincomputing.com>
Add device tree binding documentation for the ESWIN
eic7700 sdhci controller module.
Signed-off-by: Xiang Xu <xuxiang@eswincomputing.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
---
.../bindings/mmc/eswin,sdhci-eic7700.yaml | 131 ++++++++++++++++++
1 file changed, 131 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/eswin,sdhci-eic7700.yaml
diff --git a/Documentation/devicetree/bindings/mmc/eswin,sdhci-eic7700.yaml b/Documentation/devicetree/bindings/mmc/eswin,sdhci-eic7700.yaml
new file mode 100644
index 000000000000..d4826f2aa619
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/eswin,sdhci-eic7700.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/eswin,sdhci-eic7700.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESWIN EIC7700 SoC SDHCI controller
+
+maintainers:
+ - Shuang Liang <liangshuang@eswincomputing.com>
+ - Xuyang Dong <dongxuyang@eswincomputing.com>
+
+allOf:
+ - $ref: /schemas/mmc/mmc-controller.yaml#
+
+properties:
+ compatible:
+ const: eswin,eic7700-emmc-sdhci
+
+ reg:
+ maxItems: 1
+ description: Common configuration registers
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ assigned-clocks:
+ maxItems: 1
+ description: should contain "core_clk" phandle + clock-specifier pairs.
+
+ assigned-clock-rates:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ description: handles to clock for the sdhci controller.
+
+ clock-names:
+ minItems: 2
+ description: the name of each clock.
+
+ clock-output-names:
+ maxItems: 1
+
+ '#clock-cells':
+ enum: [0]
+ description:
+ With this property in place we will export one clock
+ representing the Card Clock. These clocks are expected to be
+ consumed by our PHY.
+
+ resets:
+ description: resets to be used by the controller.
+
+ reset-names:
+ description: names of the resets listed in resets property in the same order.
+
+ bus-width:
+ enum: [4, 8]
+ description: for emmc bus-width is 8, for sdio bus-width is 4.
+
+ eswin,hsp_sp_csr:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: hsp_sp_csr regs to be used by the controller.
+ items:
+ - description: phandle to HSP_SP_CSR register block
+ - description: status register offset
+ - description: control register offset
+ - description: configuration register offset
+
+ eswin,syscrg_csr:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: syscrg_csr regs to be used by the controller.
+ items:
+ - description: phandle to SYS_CRG_CSR register block
+ - description: status register offset
+ - description: control register offset
+ - description: configuration register offset
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - assigned-clocks
+ - assigned-clock-rates
+ - clocks
+ - clock-names
+ - clock-output-names
+ - resets
+ - reset-names
+ - bus-width
+ - eswin,hsp_sp_csr
+ - eswin,syscrg_csr
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ sdhci_emmc: mmc@50450000 {
+ compatible = "eswin,eic7700-emmc-sdhci";
+ reg = <0x50450000 0x10000>;
+ interrupt-parent = <&plic>;
+ interrupts = <79>;
+ clocks = <&clock 554>, <&clock 546>;
+ clock-names = "clk_xin", "clk_ahb";
+ assigned-clocks = <&clock 554>;
+ assigned-clock-rates = <200000000>;
+ clock-output-names = "emmc_cardclock";
+ #clock-cells = <0>;
+
+ resets = <&reset 7 (1 << 6)>,
+ <&reset 7 (1 << 3)>,
+ <&reset 7 (1 << 19)>,
+ <&reset 7 (1 << 23)>;
+ reset-names = "txrx_rst", "phy_rst", "prstn", "arstn";
+
+ core-clk-reg = <0x51828160>;
+ disable-cqe-dcmd;
+ bus-width = <8>;
+ non-removable;
+ mmc-hs400-1_8v;
+ max-frequency = <200000000>;
+ eswin,hsp_sp_csr = <&hsp_sp_csr 0x1038 0x508 0x50c>;
+ eswin,syscrg_csr = <&sys_crg 0x160 0x148 0x14c>;
+ status = "disabled";
+ };
--
2.17.1
next prev parent reply other threads:[~2025-05-16 9:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-16 9:12 [PATCH v1 0/2] Add driver support for ESWIN eic7700 SoC sdhci controller dongxuyang
2025-05-16 9:16 ` dongxuyang [this message]
2025-05-16 10:26 ` [PATCH v1 1/2] dt-bindings: sdhci: eswin: Documentation for eic7700 SoC Rob Herring (Arm)
2025-05-16 13:12 ` Krzysztof Kozlowski
2025-05-16 9:17 ` [PATCH v1 2/2] sdhci: eswin: Add eic7700 sdhci driver dongxuyang
2025-05-16 13:17 ` Krzysztof Kozlowski
2025-05-17 1:57 ` kernel test robot
2025-05-22 7:48 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250516091650.832-1-dongxuyang@eswincomputing.com \
--to=dongxuyang@eswincomputing.com \
--cc=adrian.hunter@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linmin@eswincomputing.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ningyu@eswincomputing.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=shanchun1218@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=xuxiang@eswincomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox