From: Frank Li <Frank.Li@nxp.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Rui Miguel Silva <rmfrfs@gmail.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Robert Chiras <robert.chiras@nxp.com>,
"Guoniu.zhou" <guoniu.zhou@nxp.com>
Subject: [PATCH v5 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem
Date: Thu, 22 May 2025 13:56:49 -0400 [thread overview]
Message-ID: <20250522-8qxp_camera-v5-11-d4be869fdb7e@nxp.com> (raw)
In-Reply-To: <20250522-8qxp_camera-v5-0-d4be869fdb7e@nxp.com>
Add CSI related nodes (i2c, irqsteer, csi, lpcg) for i.MX8 img subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v4 to v5
- remove empty endpoint
Change from v3 to v4
- remove unused clock clock-img-axi
- add ports information for isi and csi
- Fix 8qxp clock, irq and power domain
- Fix reg size
Change from v2 to v3
- remove phy and put csr register space under mipi csi2
change from v1 to v2
- move scu reset under scu node
- add 8qm comaptible string for mipi csi2 and mipi csi phys.
---
arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi | 362 ++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi | 79 +++++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 5 +
arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi | 83 +++++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 5 +
5 files changed, 534 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index d39242c1b9f79..2cf0f7208350a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -10,12 +10,264 @@ img_ipg_clk: clock-img-ipg {
clock-output-names = "img_ipg_clk";
};
+img_pxl_clk: clock-img-pxl {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "img_pxl_clk";
+};
+
img_subsys: bus@58000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+ isi: isi@58100000 {
+ reg = <0x58100000 0x80000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3",
+ "per4", "per5", "per6", "per7";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>,
+ <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>,
+ <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>,
+ <&pd IMX_SC_R_ISI_CH7>;
+ status = "disabled";
+ };
+
+ irqsteer_csi0: irqsteer@58220000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58220000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ gpio0_mipi_csi0: gpio@58222000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58222000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi0_core_lpcg: clock-controller@58223018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58223018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi0_esc_lpcg: clock-controller@5822301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5822301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi0: i2c@58226000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58226000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_0: csi@58227000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58227000 0x1000>,
+ <0x58221000 0x1000>;
+ clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_0>;
+ status = "disabled";
+ };
+
+ irqsteer_csi1: irqsteer@58240000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58240000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ gpio0_mipi_csi1: gpio@58242000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58242000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ csi1_core_lpcg: clock-controller@58243018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58243018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi1_esc_lpcg: clock-controller@5824301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5824301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi1: i2c@58246000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58246000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_1: csi@58247000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58247000 0x1000>,
+ <0x58241000 0x1000>;
+ clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_1>;
+ status = "disabled";
+ };
+
+ irqsteer_parallel: irqsteer@58260000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58260000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_dummy>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_PI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ pi0_ipg_lpcg: clock-controller@58263004 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263004 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "pi0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_pxl_lpcg: clock-controller@58263018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263018 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_misc_lpcg: clock-controller@5826301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5826301c 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_misc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c0_parallel: i2c@58266000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58266000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_parallel>;
+ power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+ status = "disabled";
+ };
+
jpegdec: jpegdec@58400000 {
reg = <0x58400000 0x00050000>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
@@ -40,6 +292,116 @@ jpegenc: jpegenc@58450000 {
<&pd IMX_SC_R_MJPEG_ENC_S0>;
};
+ pdma0_lpcg: clock-controller@58500000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58500000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma0_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pdma1_lpcg: clock-controller@58510000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58510000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma1_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH1>;
+ };
+
+ pdma2_lpcg: clock-controller@58520000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58520000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma2_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH2>;
+ };
+
+ pdma3_lpcg: clock-controller@58530000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58530000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma3_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH3>;
+ };
+
+ pdma4_lpcg: clock-controller@58540000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58540000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma4_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH4>;
+ };
+
+ pdma5_lpcg: clock-controller@58550000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58550000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma5_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH5>;
+ };
+
+ pdma6_lpcg: clock-controller@58560000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58560000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma6_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH6>;
+ };
+
+ pdma7_lpcg: clock-controller@58570000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58570000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma7_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH7>;
+ };
+
+ csi0_pxl_lpcg: clock-controller@58580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58580000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi1_pxl_lpcg: clock-controller@58590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58590000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi1_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x585a0000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+ power-domains = <&pd IMX_SC_R_HDMI_RX>;
+ };
+
img_jpeg_dec_lpcg: clock-controller@585d0000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x585d0000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 2bbdacb1313f9..4b7e685daa024 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -3,6 +3,31 @@
* Copyright 2021 NXP
*/
+&isi {
+ compatible = "fsl,imx8qm-isi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ isi_in_3: endpoint {
+ remote-endpoint = <&mipi_csi1_out>;
+ };
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
};
@@ -10,3 +35,57 @@ &jpegdec {
&jpegenc {
compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_0 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
+&mipi_csi_1 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi1_out: endpoint {
+ remote-endpoint = <&isi_in_3>;
+ };
+ };
+ };
+};
+
+&pi0_ipg_lpcg {
+ status = "disabled";
+};
+
+&pi0_misc_lpcg {
+ status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 6fa31bc9ece8f..c6a17a0d739c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -333,6 +333,11 @@ iomuxc: pinctrl {
compatible = "fsl,imx8qm-iomuxc";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 3a087317591d8..50015f8dd4e43 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -4,6 +4,85 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
+&csi1_pxl_lpcg {
+ status = "disabled";
+};
+
+&csi1_core_lpcg {
+ status = "disabled";
+};
+
+&csi1_esc_lpcg {
+ status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+ status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+ status = "disabled";
+};
+
+&irqsteer_csi1 {
+ status = "disabled";
+};
+
+&isi {
+ compatible = "fsl,imx8qxp-isi";
+ reg = <0x58100000 0x60000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>,
+ <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>,
+ <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qxp-jpgdec";
};
@@ -11,3 +90,7 @@ &jpegdec {
&jpegenc {
compatible = "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_1 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 05138326f0a57..c078d92f76c0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -241,6 +241,11 @@ scu_key: keys {
status = "disabled";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
--
2.34.1
next prev parent reply other threads:[~2025-05-22 17:57 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-22 17:56 [PATCH v5 00/13] media: imx8: add camera support Frank Li
2025-05-22 17:56 ` [PATCH v5 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
2025-05-22 17:56 ` [PATCH v5 02/13] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
2025-05-22 17:56 ` [PATCH v5 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask Frank Li
2025-05-22 17:56 ` [PATCH v5 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-06-17 14:34 ` Laurent Pinchart
2025-05-22 17:56 ` [PATCH v5 05/13] media: nxp: imx8-isi: Remove redundant check for dma_set_mask_and_coherent() Frank Li
2025-05-22 17:56 ` [PATCH v5 06/13] media: nxp: imx8-isi: Use dev_err_probe() to simplify code Frank Li
2025-05-22 17:56 ` [PATCH v5 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
2025-05-22 17:56 ` [PATCH v5 08/13] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
2025-05-22 17:56 ` [PATCH v5 09/13] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
2025-05-22 17:56 ` [PATCH v5 10/13] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
2025-05-22 17:56 ` Frank Li [this message]
2025-07-10 1:41 ` [PATCH v5 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
2025-07-11 5:52 ` Shawn Guo
2025-05-22 17:56 ` [PATCH v5 12/13] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-07-11 5:54 ` Shawn Guo
2025-05-22 17:56 ` [PATCH v5 13/13] arm64: dts: imx8q: add camera ov5640 support " Frank Li
2025-07-11 7:22 ` Shawn Guo
2025-07-11 14:48 ` Frank Li
2025-07-13 1:40 ` Shawn Guo
2025-06-09 17:04 ` [PATCH v5 00/13] media: imx8: add camera support Frank Li
2025-06-11 14:25 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250522-8qxp_camera-v5-11-d4be869fdb7e@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=robert.chiras@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).