From: Christian Marangi <ansuelsmth@gmail.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Felix Fietkau <nbd@nbd.name>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [PATCH 5/5] clk: en7523: add support for Airoha AN7583 clock
Date: Wed, 28 May 2025 02:49:18 +0200 [thread overview]
Message-ID: <20250528004924.19970-6-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20250528004924.19970-1-ansuelsmth@gmail.com>
Add support for Airoha AN7583 clock and reset.
Airoha AN7583 SoC have the same register address of EN7581 but implement
different bits and additional base clocks. Also reset are different with
the introduction of 2 dedicated MDIO line and drop of some reset lines.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/clk-en7523.c | 231 +++++++++++++++++++++++++++++++++++++++
1 file changed, 231 insertions(+)
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 07ab5b42fd5a..65c7b66ab78f 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -11,6 +11,7 @@
#include <linux/reset-controller.h>
#include <dt-bindings/clock/en7523-clk.h>
#include <dt-bindings/reset/airoha,en7581-reset.h>
+#include <dt-bindings/reset/airoha,an7583-reset.h>
#define RST_NR_PER_BANK 32
@@ -96,6 +97,14 @@ static const u32 bus7581_base[] = { 600000000, 540000000 };
static const u32 npu7581_base[] = { 800000000, 750000000, 720000000, 600000000 };
static const u32 crypto_base[] = { 540000000, 480000000 };
static const u32 emmc7581_base[] = { 200000000, 150000000 };
+/* AN7583 */
+static const u32 gsw7583_base[] = { 540672000, 270336000, 400000000, 200000000 };
+static const u32 emi7583_base[] = { 540672000, 480000000, 400000000, 300000000 };
+static const u32 bus7583_base[] = { 600000000, 540672000, 480000000, 400000000 };
+static const u32 spi7583_base[] = { 100000000, 12500000 };
+static const u32 npu7583_base[] = { 666000000, 800000000, 720000000, 600000000 };
+static const u32 crypto7583_base[] = { 540672000, 400000000 };
+static const u32 emmc7583_base[] = { 150000000, 200000000 };
static const struct en_clk_desc en7523_base_clks[] = {
{
@@ -298,6 +307,114 @@ static const struct en_clk_desc en7581_base_clks[] = {
}
};
+static const struct en_clk_desc an7583_base_clks[] = {
+ {
+ .id = EN7523_CLK_GSW,
+ .name = "gsw",
+
+ .base_reg = REG_GSW_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 8,
+ .base_values = gsw7583_base,
+ .n_base_values = ARRAY_SIZE(gsw7583_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ .div_offset = 1,
+ }, {
+ .id = EN7523_CLK_EMI,
+ .name = "emi",
+
+ .base_reg = REG_EMI_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 8,
+ .base_values = emi7583_base,
+ .n_base_values = ARRAY_SIZE(emi7583_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ .div_offset = 1,
+ }, {
+ .id = EN7523_CLK_BUS,
+ .name = "bus",
+
+ .base_reg = REG_BUS_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 8,
+ .base_values = bus7583_base,
+ .n_base_values = ARRAY_SIZE(bus7583_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ .div_offset = 1,
+ }, {
+ .id = EN7523_CLK_SLIC,
+ .name = "slic",
+
+ .base_reg = REG_SPI_CLK_FREQ_SEL,
+ .base_bits = 1,
+ .base_shift = 0,
+ .base_values = slic_base,
+ .n_base_values = ARRAY_SIZE(slic_base),
+
+ .div_reg = REG_SPI_CLK_DIV_SEL,
+ .div_bits = 5,
+ .div_shift = 24,
+ .div_val0 = 20,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_SPI,
+ .name = "spi",
+
+ .base_reg = REG_SPI_CLK_FREQ_SEL,
+ .base_bits = 1,
+ .base_shift = 1,
+ .base_values = spi7583_base,
+ .n_base_values = ARRAY_SIZE(spi7583_base),
+
+ .div_reg = REG_SPI_CLK_DIV_SEL,
+ .div_bits = 5,
+ .div_shift = 8,
+ .div_val0 = 40,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_NPU,
+ .name = "npu",
+
+ .base_reg = REG_NPU_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 9,
+ .base_values = npu7583_base,
+ .n_base_values = ARRAY_SIZE(npu7583_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ .div_offset = 1,
+ }, {
+ .id = EN7523_CLK_CRYPTO,
+ .name = "crypto",
+
+ .base_reg = REG_CRYPTO_CLKSRC2,
+ .base_bits = 1,
+ .base_shift = 0,
+ .base_values = crypto7583_base,
+ .n_base_values = ARRAY_SIZE(crypto7583_base),
+ }, {
+ .id = EN7581_CLK_EMMC,
+ .name = "emmc",
+
+ .base_reg = REG_CRYPTO_CLKSRC2,
+ .base_bits = 1,
+ .base_shift = 13,
+ .base_values = emmc7583_base,
+ .n_base_values = ARRAY_SIZE(emmc7583_base),
+ }
+};
+
static const u16 en7581_rst_ofs[] = {
REG_RST_CTRL2,
REG_RST_CTRL1,
@@ -361,6 +478,59 @@ static const u16 en7581_rst_map[] = {
[EN7581_XPON_MAC_RST] = RST_NR_PER_BANK + 31,
};
+static const u16 an7583_rst_map[] = {
+ /* RST_CTRL2 */
+ [AN7583_XPON_PHY_RST] = 0,
+ [AN7583_GPON_OLT_RST] = 1,
+ [AN7583_CPU_TIMER2_RST] = 2,
+ [AN7583_HSUART_RST] = 3,
+ [AN7583_UART4_RST] = 4,
+ [AN7583_UART5_RST] = 5,
+ [AN7583_I2C2_RST] = 6,
+ [AN7583_XSI_MAC_RST] = 7,
+ [AN7583_XSI_PHY_RST] = 8,
+ [AN7583_NPU_RST] = 9,
+ [AN7583_TRNG_MSTART_RST] = 12,
+ [AN7583_DUAL_HSI0_RST] = 13,
+ [AN7583_DUAL_HSI1_RST] = 14,
+ [AN7583_DUAL_HSI0_MAC_RST] = 16,
+ [AN7583_DUAL_HSI1_MAC_RST] = 17,
+ [AN7583_WDMA_RST] = 19,
+ [AN7583_WOE0_RST] = 20,
+ [AN7583_HSDMA_RST] = 22,
+ [AN7583_TDMA_RST] = 24,
+ [AN7583_EMMC_RST] = 25,
+ [AN7583_SOE_RST] = 26,
+ [AN7583_XFP_MAC_RST] = 28,
+ [AN7583_MDIO0] = 30,
+ [AN7583_MDIO1] = 31,
+ /* RST_CTRL1 */
+ [AN7583_PCM1_ZSI_ISI_RST] = RST_NR_PER_BANK + 0,
+ [AN7583_FE_PDMA_RST] = RST_NR_PER_BANK + 1,
+ [AN7583_FE_QDMA_RST] = RST_NR_PER_BANK + 2,
+ [AN7583_PCM_SPIWP_RST] = RST_NR_PER_BANK + 4,
+ [AN7583_CRYPTO_RST] = RST_NR_PER_BANK + 6,
+ [AN7583_TIMER_RST] = RST_NR_PER_BANK + 8,
+ [AN7583_PCM1_RST] = RST_NR_PER_BANK + 11,
+ [AN7583_UART_RST] = RST_NR_PER_BANK + 12,
+ [AN7583_GPIO_RST] = RST_NR_PER_BANK + 13,
+ [AN7583_GDMA_RST] = RST_NR_PER_BANK + 14,
+ [AN7583_I2C_MASTER_RST] = RST_NR_PER_BANK + 16,
+ [AN7583_PCM2_ZSI_ISI_RST] = RST_NR_PER_BANK + 17,
+ [AN7583_SFC_RST] = RST_NR_PER_BANK + 18,
+ [AN7583_UART2_RST] = RST_NR_PER_BANK + 19,
+ [AN7583_GDMP_RST] = RST_NR_PER_BANK + 20,
+ [AN7583_FE_RST] = RST_NR_PER_BANK + 21,
+ [AN7583_USB_HOST_P0_RST] = RST_NR_PER_BANK + 22,
+ [AN7583_GSW_RST] = RST_NR_PER_BANK + 23,
+ [AN7583_SFC2_PCM_RST] = RST_NR_PER_BANK + 25,
+ [AN7583_PCIE0_RST] = RST_NR_PER_BANK + 26,
+ [AN7583_PCIE1_RST] = RST_NR_PER_BANK + 27,
+ [AN7583_CPU_TIMER_RST] = RST_NR_PER_BANK + 28,
+ [AN7583_PCIE_HB_RST] = RST_NR_PER_BANK + 29,
+ [AN7583_XPON_MAC_RST] = RST_NR_PER_BANK + 31,
+};
+
static u32 en7523_get_base_rate(const struct en_clk_desc *desc, u32 val)
{
if (!desc->base_bits)
@@ -690,6 +860,54 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
return en7581_reset_register(&pdev->dev, clk_map);
}
+static int an7583_reset_register(struct device *dev, struct regmap *map)
+{
+ struct en_rst_data *rst_data;
+
+ rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL);
+ if (!rst_data)
+ return -ENOMEM;
+
+ rst_data->bank_ofs = en7581_rst_ofs;
+ rst_data->idx_map = an7583_rst_map;
+ rst_data->map = map;
+
+ rst_data->rcdev.nr_resets = ARRAY_SIZE(an7583_rst_map);
+ rst_data->rcdev.of_xlate = en7523_reset_xlate;
+ rst_data->rcdev.ops = &en7581_reset_ops;
+ rst_data->rcdev.of_node = dev->of_node;
+ rst_data->rcdev.of_reset_n_cells = 1;
+ rst_data->rcdev.owner = THIS_MODULE;
+ rst_data->rcdev.dev = dev;
+
+ return devm_reset_controller_register(dev, &rst_data->rcdev);
+}
+
+static int an7583_clk_hw_init(struct platform_device *pdev,
+ const struct en_clk_soc_data *soc_data,
+ struct clk_hw_onecell_data *clk_data)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *map, *clk_map;
+
+ map = syscon_regmap_lookup_by_compatible("airoha,en7581-chip-scu");
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ clk_map = device_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(clk_map))
+ return PTR_ERR(clk_map);
+
+ en75xx_register_clocks(dev, soc_data, clk_data, map, clk_map);
+
+ regmap_clear_bits(clk_map, REG_NP_SCU_SSTR,
+ REG_PCIE_XSI0_SEL_MASK | REG_PCIE_XSI1_SEL_MASK);
+ regmap_update_bits(clk_map, REG_NP_SCU_PCIC, REG_PCIE_CTRL,
+ FIELD_PREP(REG_PCIE_CTRL, 3));
+
+ return an7583_reset_register(dev, clk_map);
+}
+
static int en7523_clk_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
@@ -736,9 +954,22 @@ static const struct en_clk_soc_data en7581_data = {
.hw_init = en7581_clk_hw_init,
};
+static const struct en_clk_soc_data an7583_data = {
+ .base_clks = an7583_base_clks,
+ /* We increment num_clocks by 1 to account for additional PCIe clock */
+ .num_clocks = ARRAY_SIZE(an7583_base_clks) + 1,
+ .pcie_ops = {
+ .is_enabled = en7581_pci_is_enabled,
+ .enable = en7581_pci_enable,
+ .disable = en7581_pci_disable,
+ },
+ .hw_init = an7583_clk_hw_init,
+};
+
static const struct of_device_id of_match_clk_en7523[] = {
{ .compatible = "airoha,en7523-scu", .data = &en7523_data },
{ .compatible = "airoha,en7581-scu", .data = &en7581_data },
+ { .compatible = "airoha,an7583-clock", .data = &an7583_data },
{ /* sentinel */ }
};
--
2.48.1
prev parent reply other threads:[~2025-05-28 0:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-28 0:49 [PATCH 0/5] clk: add support for Airoha AN7583 clock Christian Marangi
2025-05-28 0:49 ` [PATCH 1/5] clk: en7523: convert driver to regmap API Christian Marangi
2025-05-28 0:49 ` [PATCH 2/5] clk: en7523: generalize register clocks function Christian Marangi
2025-05-28 0:49 ` [PATCH 3/5] dt-bindings: reset: add binding for Airoha AN7583 SoC reset Christian Marangi
2025-05-28 7:31 ` Krzysztof Kozlowski
2025-05-28 0:49 ` [PATCH 4/5] dt-bindings: clock: airoha: Document support for AN7583 clock Christian Marangi
2025-05-28 7:30 ` Krzysztof Kozlowski
2025-05-28 8:54 ` Christian Marangi
2025-05-28 11:56 ` Krzysztof Kozlowski
2025-05-28 12:57 ` Christian Marangi
2025-05-29 9:00 ` Krzysztof Kozlowski
2025-05-30 15:26 ` Christian Marangi
2025-06-02 8:13 ` Krzysztof Kozlowski
2025-05-28 0:49 ` Christian Marangi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250528004924.19970-6-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nbd@nbd.name \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).