[PATCH v1] arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI

[PATCH v1] arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI

[Emanuele Ghidoli]

From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.

Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
index 226398c37fa9..d90d13287076 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
@@ -717,8 +717,8 @@ AM62PX_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (D10) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SO
 	/* Verdin I2C_3_HDMI */
 	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
-			AM62PX_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
-			AM62PX_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
+			AM62PX_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62PX_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
 		>;
 	};
 
-- 
2.43.0

Re: [PATCH v1] arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI

[Francesco Dolcini]

On Thu, May 29, 2025 at 12:25:54PM +0200, Emanuele Ghidoli wrote:
> From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
> 
> Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
> external pull resistors populated on the SoM. This ensures proper
> default line levels.
> 
> Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
> Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Re: [PATCH v1] arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI

[Vignesh Raghavendra]

Hi Emanuele Ghidoli,

On Thu, 29 May 2025 12:25:54 +0200, Emanuele Ghidoli wrote:
> Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
> external pull resistors populated on the SoM. This ensures proper
> default line levels.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI
      commit: cb2d9c00770e2e6c51864704b5d98c9a0ddccaf9

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh