[PATCH v6 06/17] drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

According to Hardware Programming Guide for DSI PHY, the retime buffer
resync should be done after PLL clock users (byte_clk and intf_byte_clk)
are enabled.  Downstream also does it as part of configuring the PLL.

Driver was only turning off the resync FIFO buffer, but never bringing it
on again.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

Changes in v6:
1. Fix typo in commit msg

Changes in v5:
1. New patch
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index c19890358b7479c85c793aa7470904127c2d0206..f0ff6c9fbc2e6d28c96c08114c0f417708d70b10 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -467,6 +467,10 @@ static int dsi_pll_7nm_vco_prepare(struct clk_hw *hw)
 	if (pll_7nm->slave)
 		dsi_pll_enable_global_clk(pll_7nm->slave);
 
+	writel(0x1, pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL);
+	if (pll_7nm->slave)
+		writel(0x1, pll_7nm->slave->phy->base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL);
+
 error:
 	return rc;
 }

-- 
2.45.2