[PATCH v3 28/28] misc: lan966x_pci: Add drivers needed to support SFPs in Kconfig help

[Herve Codina <herve.codina@bootlin.com>]

Recently, new device-tree nodes were added in the overlay to add support
for SFPs on LAN966x PCI device.

The LAN966X Kconfig help section mentions drivers related to devices
added based on the overlay description.

Add drivers related to devices described by those new nodes in the
already existing driver list.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/misc/Kconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b05fddff8f97..ab6a94b201be 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -636,13 +636,18 @@ config MCHP_LAN966X_PCI
 	  Even if this driver does not depend on those other drivers, in order
 	  to have a fully functional board, the following drivers are needed:
 	    - fixed-clock (COMMON_CLK)
+	    - i2c-mux-pinctrl (I2C_MUX_PINCTRL)
 	    - lan966x-cpu-syscon (MFD_SYSCON)
+	    - lan966x-gck (COMMON_CLK_LAN966X)
 	    - lan966x-miim (MDIO_MSCC_MIIM)
 	    - lan966x-oic (LAN966X_OIC)
 	    - lan966x-pinctrl (PINCTRL_OCELOT)
 	    - lan966x-serdes (PHY_LAN966X_SERDES)
 	    - lan966x-switch (LAN966X_SWITCH)
 	    - lan966x-switch-reset (RESET_MCHP_SPARX5)
+	    - sam9x60-i2c (I2C_AT91)
+	    - sama5d2-flexcom (MFD_ATMEL_FLEXCOM)
+	    - sfp (SFP)
 
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
-- 
2.49.0