[PATCH v5 1/2] leds: leds-lp50xx: Handle reg to get correct multi_index

[Johan Adolfsson <johan.adolfsson@axis.com>]

mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.

If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.

If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.

Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
---
 drivers/leds/leds-lp50xx.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
index 02cb1565a9fb..344791b6c575 100644
--- a/drivers/leds/leds-lp50xx.c
+++ b/drivers/leds/leds-lp50xx.c
@@ -476,6 +476,7 @@ static int lp50xx_probe_dt(struct lp50xx *priv)
 			return -ENOMEM;
 
 		fwnode_for_each_child_node(child, led_node) {
+			int multi_index = num_colors;
 			ret = fwnode_property_read_u32(led_node, "color",
 						       &color_id);
 			if (ret) {
@@ -483,8 +484,16 @@ static int lp50xx_probe_dt(struct lp50xx *priv)
 				dev_err(priv->dev, "Cannot read color\n");
 				return ret;
 			}
+			ret = fwnode_property_read_u32(led_node, "reg", &multi_index);
+			if (ret != 0) {
+				dev_err(priv->dev, "reg must be set\n");
+				return -EINVAL;
+			} else if (multi_index >= LP50XX_LEDS_PER_MODULE) {
+				dev_err(priv->dev, "reg %i out of range\n", multi_index);
+				return -EINVAL;
+			}
 
-			mc_led_info[num_colors].color_index = color_id;
+			mc_led_info[multi_index].color_index = color_id;
 			num_colors++;
 		}
 

-- 
2.30.2