devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Add driver support for ESWIN eic7700 SoC reset controller
@ 2025-06-19  7:58 dongxuyang
  2025-06-19  8:00 ` [PATCH v3 1/2] dt-bindings: reset: eswin: Documentation for eic7700 SoC dongxuyang
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: dongxuyang @ 2025-06-19  7:58 UTC (permalink / raw)
  To: p.zabel, robh, krzk+dt, conor+dt, devicetree, linux-kernel
  Cc: ningyu, linmin, huangyifeng, Xuyang Dong

From: Xuyang Dong <dongxuyang@eswincomputing.com>

There are some register offsets in reset dt-bindings. It could be used.
Therefore, we want to keep these bindings. I don't known if it meets
the requirements.

PIPE_RST_CTRL, TBU_RST_CTRL and TEST_RST_CTRL are not used in this
driver. Therefore, these are left out.

Updates:

  dt-bindings: reset: eswin: Documentation for eic7700 SoC
  v2 -> v3:
    1. Drop syscon and simple-mfd from yaml and code, because these are
       not necessary.
    2. Update description to introduce reset controller.
    3. Add reset control indices for dt-bindings.
    4. Keep the register offsets in dt-bindings.

  v1 -> v2:
    1. Clear warnings/errors for using "make dt_binding_check".
    2. Update example, change parent node from sys-crg to reset-controller
       for reset yaml.
    3. Drop the child node and add '#reset-cells' to the parent node.
    4. Drop the description, because sys-crg block is changed to reset-
       controller.
    5. Change hex numbers to decimal numbers going from 0, and drop the
       not needed hardware numbers.

  reset: eswin: Add eic7700 reset driver
  v2 -> v3:
    1. Change syscon_node_to_regmap() to MMIO regmap functions, because
       droped syscon.
    2. Add BIT() in function eswin_reset_set() to shift the reset
       control indices.
    3. Remove forced type conversions from function eswin_reset_of_
       xlate_lookup_id().

  v1 -> v2:
    1. Modify the code according to the suggestions.
    2. Use eswin_reset_assert() and eswin_reset_deassert in function
       eswin_reset_reset().
    3. Place RESET_EIC7700 in Kconfig and Makefile in order.
    4. Use dev_err_probe() in probe function.

Xuyang Dong (2):
  dt-bindings: reset: eswin: Documentation for eic7700 SoC
  reset: eswin: Add eic7700 reset driver

 .../bindings/reset/eswin,eic7700-reset.yaml   |  42 ++
 drivers/reset/Kconfig                         |  10 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-eic7700.c                 | 243 +++++++++
 .../dt-bindings/reset/eswin,eic7700-reset.h   | 460 ++++++++++++++++++
 5 files changed, 756 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/eswin,eic7700-reset.yaml
 create mode 100644 drivers/reset/reset-eic7700.c
 create mode 100644 include/dt-bindings/reset/eswin,eic7700-reset.h

--
2.17.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2025-06-19 17:41 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-19  7:58 [PATCH v3 0/2] Add driver support for ESWIN eic7700 SoC reset controller dongxuyang
2025-06-19  8:00 ` [PATCH v3 1/2] dt-bindings: reset: eswin: Documentation for eic7700 SoC dongxuyang
2025-06-19 17:39   ` Krzysztof Kozlowski
2025-06-19  8:01 ` [PATCH v3 2/2] reset: eswin: Add eic7700 reset driver dongxuyang
2025-06-19 17:41   ` Krzysztof Kozlowski
2025-06-19 17:40 ` [PATCH v3 0/2] Add driver support for ESWIN eic7700 SoC reset controller Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).