[PATCH v2 0/6] spacemit: introduce P1 PMIC and regulator support

[PATCH v2 0/6] spacemit: introduce P1 PMIC and regulator support

[Alex Elder]

The SpacemiT P1 is an I2C-controlled PMIC that implements six buck
converters and twelve LDOs.  It contains a load switch, ADC channels,
GPIOs, a real-time clock, and a watchdog timer.

This series introduces a multifunction driver for the P1 PMIC as well
as a driver for its regulators.

This series is available here:
  https://github.com/riscstar/linux/tree/outgoing/pmic-v2

					-Alex

Between version 1 and version 2:
  - Added Reviewed-by tag from Mark Brown to patch 3
  - Implemented suggestions from Vivian Wang:
      - Fixed a typo in the subject line in patch 1
      - Now use module_i2c_driver() for the PMIC driver in patch 2
      - Added MODULE_ALIAS() for both drivers (patches 2 and 3)
      - Defined and used DRV_NAME in both drivers
      - Added additional Kconfig module help text for both drivers

Here is version 1 of this series:
  https://lore.kernel.org/lkml/20250613210150.1468845-1-elder@riscstar.com/

Alex Elder (6):
  dt-bindings: mfd: add support the SpacemiT P1 PMIC
  mfd: spacemit: add support for SpacemiT PMICs
  regulator: spacemit: support SpacemiT P1 regulators
  riscv: dts: spacemit: enable the i2c8 adapter
  riscv: dts: spacemit: define fixed regulators
  riscv: dts: spacemit: define regulator constraints

 .../devicetree/bindings/mfd/spacemit,p1.yaml  |  86 ++++++++++
 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 138 +++++++++++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |   7 +
 arch/riscv/boot/dts/spacemit/k1.dtsi          |  11 ++
 drivers/mfd/Kconfig                           |  13 ++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/spacemit-pmic.c                   |  83 +++++++++
 drivers/regulator/Kconfig                     |  11 ++
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/spacemit-p1.c               | 157 ++++++++++++++++++
 10 files changed, 508 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
 create mode 100644 drivers/mfd/spacemit-pmic.c
 create mode 100644 drivers/regulator/spacemit-p1.c

base-commit: 2c923c845768a0f0e34b8161d70bc96525385782
-- 
2.45.2

[PATCH v2 1/6] dt-bindings: mfd: add support the SpacemiT P1 PMIC

[Alex Elder]

Enable the SpacemiT P1, which is an I2C-controlled PMIC.  Initially
only the regulators will be supported.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
v2: - Spell SpacemiT correctly in the subject line

 .../devicetree/bindings/mfd/spacemit,p1.yaml  | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/spacemit,p1.yaml

diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
new file mode 100644
index 0000000000000..5cc34d4934b54
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/spacemit,p1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT P1 Power Management Integrated Circuit
+
+maintainers:
+  - Troy Mitchell <troymitchell988@gmail.com>
+
+description:
+  P1 is an I2C-controlled PMIC produced by SpacemiT.  It implements six
+  constant-on-time buck converters and twelve low-dropout regulators.
+  It also contains a load switch, watchdog timer, real-time clock, eight
+  12-bit ADC channels, and six GPIOs.  Additional details are available
+  in the "Power Stone/P1" section at the following link.
+    https://developer.spacemit.com/documentation
+
+properties:
+  compatible:
+    const: spacemit,p1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vin-supply:
+    description: Input supply phandle.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(buck[1-6]|aldo[1-4]|dldo[1-7])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@41 {
+            compatible = "spacemit,p1";
+            reg = <0x41>;
+            interrupts = <64>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3450000>;
+                    regulator-ramp-delay = <5000>;
+                    regulator-always-on;
+                };
+
+                aldo1 {
+                    regulator-name = "aldo1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                };
+
+                dldo1 {
+                    regulator-name = "dldo1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
-- 
2.45.2

[PATCH v2 2/6] mfd: spacemit: add support for SpacemiT PMICs

[Alex Elder]

Add support for SpacemiT PMICs. Initially only the P1 PMIC is supported
but the driver is structured to allow support for others to be added.

The P1 PMIC is controlled by I2C, and is normally implemented with the
SpacemiT K1 SoC.  This PMIC provides six buck converters and 12 LDO
regulators.  It also implements a switch, watchdog timer, real-time clock,
and more, but initially we will only support its regulators.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
v2: - Use module_i2c_driver()
    - Expanded Kconfig module help text
    - Add MODULE_ALIAS(), and define and use DRV_NAME

 drivers/mfd/Kconfig         | 13 ++++++
 drivers/mfd/Makefile        |  1 +
 drivers/mfd/spacemit-pmic.c | 83 +++++++++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+)
 create mode 100644 drivers/mfd/spacemit-pmic.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6fb3768e3d71c..94c6361dae2f6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1182,6 +1182,19 @@ config MFD_QCOM_RPM
 	  Say M here if you want to include support for the Qualcomm RPM as a
 	  module. This will build a module called "qcom_rpm".
 
+config MFD_SPACEMIT_PMIC
+	tristate "SpacemiT PMIC"
+	depends on ARCH_SPACEMIT || COMPILE_TEST
+	depends on I2C && OF
+	select MFD_CORE
+	select REGMAP_I2C
+	default ARCH_SPACEMIT
+	help
+	  This option enables support for SpacemiT I2C based PMICs.  At
+	  this time only the P1 PMIC (used with the K1 SoC) is supported.
+	  To compile this driver as a module, choose M here.  The module
+	  will be called "spacemit-pmic".
+
 config MFD_SPMI_PMIC
 	tristate "Qualcomm SPMI PMICs"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79495f9f3457b..59d1ec8db3a3f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -266,6 +266,7 @@ obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 obj-$(CONFIG_MFD_STM32_LPTIMER)	+= stm32-lptimer.o
 obj-$(CONFIG_MFD_STM32_TIMERS) 	+= stm32-timers.o
 obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
+obj-$(CONFIG_MFD_SPACEMIT_PMIC)	+= spacemit-pmic.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
 obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
diff --git a/drivers/mfd/spacemit-pmic.c b/drivers/mfd/spacemit-pmic.c
new file mode 100644
index 0000000000000..f6cae41baa77a
--- /dev/null
+++ b/drivers/mfd/spacemit-pmic.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 by RISCstar Solutions Corporation.  All rights reserved.
+ * Derived from code from:
+ *	Copyright (C) 2024 Troy Mitchell <troymitchell988@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define MOD_NAME	"spacemit-pmic"
+
+struct spacemit_pmic_data {
+	const struct regmap_config *regmap_config;
+	const struct mfd_cell *mfd_cells;	/* array */
+	size_t mfd_cell_count;
+};
+
+static const struct regmap_config p1_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= 0xaa,
+};
+
+/* The name field defines the *driver* name that should bind to the device */
+static const struct mfd_cell p1_cells[] = {
+	{
+		.name		= "spacemit-p1-regulator",
+	},
+};
+
+static const struct spacemit_pmic_data p1_pmic_data = {
+	.regmap_config	= &p1_regmap_config,
+	.mfd_cells	= p1_cells,
+	.mfd_cell_count	= ARRAY_SIZE(p1_cells),
+};
+
+static int spacemit_pmic_probe(struct i2c_client *client)
+{
+	const struct spacemit_pmic_data *data;
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+
+	/* We currently have no need for a device-specific structure */
+	data = of_device_get_match_data(dev);
+	regmap = devm_regmap_init_i2c(client, data->regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "regmap initialization failed");
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
+				    data->mfd_cells, data->mfd_cell_count,
+				    NULL, 0, NULL);
+}
+
+static const struct of_device_id spacemit_pmic_match[] = {
+	{
+		.compatible	= "spacemit,p1",
+		.data		= &p1_pmic_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, spacemit_pmic_match);
+
+static struct i2c_driver spacemit_pmic_i2c_driver = {
+	.driver	= {
+		.name		= MOD_NAME,
+		.of_match_table	= spacemit_pmic_match,
+	},
+	.probe	= spacemit_pmic_probe,
+};
+
+module_i2c_driver(spacemit_pmic_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SpacemiT multi-function PMIC driver");
+MODULE_ALIAS("platform:" MOD_NAME);
-- 
2.45.2

[PATCH v2 3/6] regulator: spacemit: support SpacemiT P1 regulators

[Alex Elder]

Add support for the regulators found in the SpacemiT P1 PMIC.  This
PMIC provides six buck converters and 12 LDO regulators.

The PMIC is implemented as a multi-function device.  These regulators
are probed based on this driver being named in a MFD cell in the P1
PMIC driver.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
---
v2: - Added Mark's Reviewed-by tag
    - Expanded Kconfig module help text
    - Add MODULE_ALIAS(), and define and use DRV_NAME

 drivers/regulator/Kconfig       |  11 +++
 drivers/regulator/Makefile      |   1 +
 drivers/regulator/spacemit-p1.c | 157 ++++++++++++++++++++++++++++++++
 3 files changed, 169 insertions(+)
 create mode 100644 drivers/regulator/spacemit-p1.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7423954153b07..ee283339f4e1e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1395,6 +1395,17 @@ config REGULATOR_SLG51000
 	  The SLG51000 is seven compact and customizable low dropout
 	  regulators.
 
+config REGULATOR_SPACEMIT_P1
+	tristate "SpacemiT P1 regulators"
+	depends on ARCH_SPACEMIT || COMPILE_TEST
+	default ARCH_SPACEMIT
+	help
+	  Enable support for regulators implemented by the SpacemiT P1
+	  power controller.  The P1 implements 6 high-efficiency buck
+	  converters and 12 programmable LDO regulators.  To compile this
+	  driver as a module, choose M here.  The module will be called
+	  "spacemit-pmic".
+
 config REGULATOR_STM32_BOOSTER
 	tristate "STMicroelectronics STM32 BOOSTER"
 	depends on ARCH_STM32 || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index be98b29d6675d..278f5b8d1c7d7 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -162,6 +162,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o
+obj-$(CONFIG_REGULATOR_SPACEMIT_P1) += spacemit-p1.o
 obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
diff --git a/drivers/regulator/spacemit-p1.c b/drivers/regulator/spacemit-p1.c
new file mode 100644
index 0000000000000..d437e6738ea1e
--- /dev/null
+++ b/drivers/regulator/spacemit-p1.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for regulators found in the SpacemiT P1 PMIC
+ *
+ * Copyright (C) 2025 by RISCstar Solutions Corporation.  All rights reserved.
+ * Derived from code from SpacemiT.
+ *	Copyright (c) 2023, SPACEMIT Co., Ltd
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#define MOD_NAME	"spacemit-p1-regulator"
+
+enum p1_regulator_id {
+	P1_BUCK1,
+	P1_BUCK2,
+	P1_BUCK3,
+	P1_BUCK4,
+	P1_BUCK5,
+	P1_BUCK6,
+
+	P1_ALDO1,
+	P1_ALDO2,
+	P1_ALDO3,
+	P1_ALDO4,
+
+	P1_DLDO1,
+	P1_DLDO2,
+	P1_DLDO3,
+	P1_DLDO4,
+	P1_DLDO5,
+	P1_DLDO6,
+	P1_DLDO7,
+};
+
+static const struct regulator_ops p1_regulator_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel   = regulator_set_voltage_time_sel,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+/* Selector value 255 can be used to disable the buck converter on sleep */
+static const struct linear_range p1_buck_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 170, 5000),
+	REGULATOR_LINEAR_RANGE(1375000, 171, 254, 25000),
+};
+
+/* Selector value 0 can be used for suspend */
+static const struct linear_range p1_ldo_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000, 11, 127, 25000),
+};
+
+/* These define the voltage selector field for buck and LDO regulators */
+#define BUCK_MASK		GENMASK(7, 0)
+#define LDO_MASK		GENMASK(6, 0)
+
+#define P1_ID(_TYPE, _n)	P1_ ## _TYPE ## _n
+#define P1_ENABLE_REG(_off, _n)	((_off) + 3 * ((_n) - 1))
+
+#define P1_REG_DESC(_TYPE, _type, _n, _s, _off, _mask, _nv, _ranges)	\
+	{								\
+		.name			= #_type #_n,			\
+		.supply_name		= _s,				\
+		.of_match		= of_match_ptr(#_type #_n),	\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.id			= P1_ID(_TYPE, _n),		\
+		.n_voltages		= _nv,				\
+		.ops			= &p1_regulator_ops,		\
+		.owner			= THIS_MODULE,			\
+		.linear_ranges		= _ranges,			\
+		.n_linear_ranges	= ARRAY_SIZE(_ranges),		\
+		.vsel_reg		= P1_ENABLE_REG(_off, _n) + 1,	\
+		.vsel_mask		= _mask,			\
+		.enable_reg		= P1_ENABLE_REG(_off, _n),	\
+		.enable_mask		= BIT(0),			\
+	}
+
+#define P1_BUCK_DESC(_n) \
+	P1_REG_DESC(BUCK, buck, _n, "vcc", 0x47, BUCK_MASK, 254, p1_buck_ranges)
+
+#define P1_ALDO_DESC(_n) \
+	P1_REG_DESC(ALDO, aldo, _n, "vcc", 0x5b, LDO_MASK, 117, p1_ldo_ranges)
+
+#define P1_DLDO_DESC(_n) \
+	P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 117, p1_ldo_ranges)
+
+static const struct regulator_desc p1_regulator_desc[] = {
+	P1_BUCK_DESC(1),
+	P1_BUCK_DESC(2),
+	P1_BUCK_DESC(3),
+	P1_BUCK_DESC(4),
+	P1_BUCK_DESC(5),
+	P1_BUCK_DESC(6),
+
+	P1_ALDO_DESC(1),
+	P1_ALDO_DESC(2),
+	P1_ALDO_DESC(3),
+	P1_ALDO_DESC(4),
+
+	P1_DLDO_DESC(1),
+	P1_DLDO_DESC(2),
+	P1_DLDO_DESC(3),
+	P1_DLDO_DESC(4),
+	P1_DLDO_DESC(5),
+	P1_DLDO_DESC(6),
+	P1_DLDO_DESC(7),
+};
+
+static int p1_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_config config = { };
+	struct device *dev = &pdev->dev;
+	u32 i;
+
+	/*
+	 * The parent device (PMIC) owns the regmap.  Since we don't
+	 * provide one in the config structure, that one will be used.
+	 */
+	config.dev = dev->parent;
+
+	for (i = 0; i < ARRAY_SIZE(p1_regulator_desc); i++) {
+		const struct regulator_desc *desc = &p1_regulator_desc[i];
+		struct regulator_dev *rdev;
+
+		rdev = devm_regulator_register(dev, desc, &config);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					     "error registering regulator %s\n",
+					     desc->name);
+	}
+
+	return 0;
+}
+
+static struct platform_driver p1_regulator_driver = {
+	.probe = p1_regulator_probe,
+	.driver = {
+		.name = MOD_NAME,
+	},
+};
+
+module_platform_driver(p1_regulator_driver);
+
+MODULE_DESCRIPTION("SpacemiT P1 regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MOD_NAME);
-- 
2.45.2

[PATCH v2 4/6] riscv: dts: spacemit: enable the i2c8 adapter

[Alex Elder]

Define properties for the I2C adapter that provides access to the
SpacemiT P1 PMIC.  Enable this adapter on the Banana Pi BPI-F3.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 15 +++++++++++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi    |  7 +++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 11 +++++++++++
 3 files changed, 33 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index fe22c747c5012..7c9f91c88e01a 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -40,6 +40,21 @@ &emmc {
 	status = "okay";
 };
 
+&i2c8 {
+	pinctrl-0 = <&i2c8_cfg>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		status = "okay";
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_2_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index 283663647a86f..9d6d4503fe751 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -11,6 +11,13 @@
 #define K1_GPIO(x)	(x / 32) (x % 32)
 
 &pinctrl {
+	i2c8_cfg: i2c8-cfg {
+		i2c8-0-pins {
+			pinmux = <K1_PADCONF(93, 0)>,	/* PWR_SCL */
+				 <K1_PADCONF(94, 0)>;	/* PWR_SDA */
+		};
+	};
+
 	uart0_2_cfg: uart0-2-cfg {
 		uart0-2-pins {
 			pinmux = <K1_PADCONF(68, 2)>,
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 14097f1f6f447..a85239e8e430b 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -483,6 +483,17 @@ gpio: gpio@d4019000 {
 				      <&pinctrl 3 0 96 32>;
 		};
 
+		i2c8: i2c@d401d800 {
+			compatible = "spacemit,k1-i2c";
+			reg = <0x0 0xd401d800 0x0 0x38>;
+			interrupts = <19>;
+			clocks = <&syscon_apbc CLK_TWSI8>,
+				 <&syscon_apbc CLK_TWSI8_BUS>;
+			clock-names = "func", "bus";
+			clock-frequency = <400000>;
+			status = "disabled";
+		};
+
 		pinctrl: pinctrl@d401e000 {
 			compatible = "spacemit,k1-pinctrl";
 			reg = <0x0 0xd401e000 0x0 0x400>;
-- 
2.45.2

[PATCH v2 5/6] riscv: dts: spacemit: define fixed regulators

[Alex Elder]

Define the DC power input and the 4v power as fixed supplies in the
Banana Pi BPI-F3.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 7c9f91c88e01a..a1c184b814262 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -28,6 +28,25 @@ led1 {
 			default-state = "on";
 		};
 	};
+
+	reg_dc_in: dc-in-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_in_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vcc_4v: vcc-4v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_4v";
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_dc_in>;
+	};
 };
 
 &emmc {
-- 
2.45.2

[PATCH v2 6/6] riscv: dts: spacemit: define regulator constraints

[Alex Elder]

Define basic constraints for the regulators in the SpacemiT P1 PMIC,
as implemented in the Banana Pi BPI-F3.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 104 ++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index a1c184b814262..83907cc1d5ccf 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -70,7 +70,111 @@ pmic@41 {
 		compatible = "spacemit,p1";
 		reg = <0x41>;
 		interrupts = <64>;
+		vin-supply = <&reg_vcc_4v>;
 		status = "okay";
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			aldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			dldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo7 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
 	};
 };
 
-- 
2.45.2

Re: [PATCH v2 2/6] mfd: spacemit: add support for SpacemiT PMICs

[Lee Jones]

On Thu, 19 Jun 2025, Alex Elder wrote:

> Add support for SpacemiT PMICs. Initially only the P1 PMIC is supported
> but the driver is structured to allow support for others to be added.
> 
> The P1 PMIC is controlled by I2C, and is normally implemented with the
> SpacemiT K1 SoC.  This PMIC provides six buck converters and 12 LDO
> regulators.  It also implements a switch, watchdog timer, real-time clock,
> and more, but initially we will only support its regulators.
> 
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
> v2: - Use module_i2c_driver()
>     - Expanded Kconfig module help text
>     - Add MODULE_ALIAS(), and define and use DRV_NAME
> 
>  drivers/mfd/Kconfig         | 13 ++++++
>  drivers/mfd/Makefile        |  1 +
>  drivers/mfd/spacemit-pmic.c | 83 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 97 insertions(+)
>  create mode 100644 drivers/mfd/spacemit-pmic.c

All comments fro v1 are still relevant.

-- 
Lee Jones [李琼斯]