[PATCH v8 9/9] samples: rust: add ACPI match table example to platform driver

[Igor Korotin <igor.korotin.linux@gmail.com>]

Extend the Rust sample platform driver to probe using device/driver name
matching, OF ID table matching, or ACPI ID table matching.

Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
---
 samples/rust/rust_driver_platform.rs | 70 +++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

diff --git a/samples/rust/rust_driver_platform.rs b/samples/rust/rust_driver_platform.rs
index 8579290eecb3..9c16945e6c70 100644
--- a/samples/rust/rust_driver_platform.rs
+++ b/samples/rust/rust_driver_platform.rs
@@ -2,8 +2,68 @@
 
 //! Rust Platform driver sample.
 
+//! ACPI match table test
+//!
+//! This demonstrates how to test an ACPI-based Rust platform driver using QEMU
+//! with a custom SSDT.
+//!
+//! Steps:
+//!
+//! 1. **Create an SSDT source file** (`ssdt.dsl`) with the following content:
+//!
+//!     ```asl
+//!     DefinitionBlock ("", "SSDT", 2, "TEST", "VIRTACPI", 0x00000001)
+//!     {
+//!         Scope (\_SB)
+//!         {
+//!             Device (T432)
+//!             {
+//!                 Name (_HID, "TST0001")  // ACPI hardware ID to match
+//!                 Name (_UID, 1)
+//!                 Name (_STA, 0x0F)        // Device present, enabled
+//!                 Name (_CRS, ResourceTemplate ()
+//!                 {
+//!                     Memory32Fixed (ReadWrite, 0xFED00000, 0x1000)
+//!                 })
+//!             }
+//!         }
+//!     }
+//!     ```
+//!
+//! 2. **Compile the table**:
+//!
+//!     ```sh
+//!     iasl -tc ssdt.dsl
+//!     ```
+//!
+//!     This generates `ssdt.aml`
+//!
+//! 3. **Run QEMU** with the compiled AML file:
+//!
+//!     ```sh
+//!     qemu-system-x86_64 -m 512M \
+//!         -enable-kvm \
+//!         -kernel path/to/bzImage \
+//!         -append "root=/dev/sda console=ttyS0" \
+//!         -hda rootfs.img \
+//!         -serial stdio \
+//!         -acpitable file=ssdt.aml
+//!     ```
+//!
+//!     Requirements:
+//!     - The `rust_driver_platform` must be present either:
+//!         - built directly into the kernel (`bzImage`), or
+//!         - available as a `.ko` file and loadable from `rootfs.img`
+//!
+//! 4. **Verify it worked** by checking `dmesg`:
+//!
+//!     ```
+//!     rust_driver_platform TST0001:00: Probed with info: '0'.
+//!     ```
+//!
+
 use kernel::{
-    c_str,
+    acpi, c_str,
     device::{self, Core},
     of, platform,
     prelude::*,
@@ -24,9 +84,17 @@ struct SampleDriver {
     [(of::DeviceId::new(c_str!("test,rust-device")), Info(42))]
 );
 
+kernel::acpi_device_table!(
+    ACPI_TABLE,
+    MODULE_ACPI_TABLE,
+    <SampleDriver as platform::Driver>::IdInfo,
+    [(acpi::DeviceId::new(b"TST0001"), Info(0))]
+);
+
 impl platform::Driver for SampleDriver {
     type IdInfo = Info;
     const OF_ID_TABLE: Option<of::IdTable<Self::IdInfo>> = Some(&OF_TABLE);
+    const ACPI_ID_TABLE: Option<acpi::IdTable<Self::IdInfo>> = Some(&ACPI_TABLE);
 
     fn probe(
         pdev: &platform::Device<Core>,
-- 
2.43.0