* [PATCH v4 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576 @ 2025-06-26 5:47 John Clark 2025-06-26 5:47 ` [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board John Clark 2025-06-26 5:47 ` [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support John Clark 0 siblings, 2 replies; 5+ messages in thread From: John Clark @ 2025-06-26 5:47 UTC (permalink / raw) To: heiko Cc: robh, krzk+dt, conor+dt, linux-arm-kernel, linux-rockchip, devicetree, linux-kernel, John Clark This series adds device tree support for the FriendlyElec NanoPi M5 board, powered by the Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). The patches enable basic booting and connectivity, including dual 1Gbps Ethernet, USB 3.2, microSD, M.2 PCIe NVMe, and HDMI. Changes in v4: - Addressed Diederik's feedback: - Renamed pinctrl nodes to align with schematic labels - Moved pinctrl-0 and pinctrl-names into button-user sub-node Changes in v3: - Improved (even more) fspi1m1_pins comment for clarity, specifying gpio1_d5, gpio1_c4-c7 (clk, d0-d4) for SPI NOR flash. - Removed redundant #address-cells and #size-cells from sfc1 node, as they are inherited from rk3576.dtsi. Changes in v2: - Fixed DT schema warnings (Rob Herring): - Renamed spi-nor@0 to flash@0 - Renamed pmic@23 pinctrl nodes to end with -pins - Renamed hym8563@51 to rtc@51 and removed clock-frequency - Renamed button@1 to button-user - Addressed Heiko Stuebner's feedback: - Sorted non-addressed nodes alphabetically - Added blank lines in regulator nodes - Improved fspi1m1_pins comment to clarify SPI NOR flash pinmux - Moved status property in saradc to last Patch 1: Updates DT bindings in rockchip.yaml Patch 2: Adds NanoPi M5 device tree and Makefile entry No MAINTAINERS update needed, as the new file is covered by the existing ARM/Rockchip SoC entry. Tested on NanoPi M5 with successful boot and feature validation. Signed-off-by: John Clark <inindev@gmail.com> --- John Clark (2): dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support .../devicetree/bindings/arm/rockchip.yaml | 6 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ 3 files changed, 1006 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts -- 2.39.5 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board 2025-06-26 5:47 [PATCH v4 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576 John Clark @ 2025-06-26 5:47 ` John Clark 2025-06-27 21:20 ` Rob Herring (Arm) 2025-06-26 5:47 ` [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support John Clark 1 sibling, 1 reply; 5+ messages in thread From: John Clark @ 2025-06-26 5:47 UTC (permalink / raw) To: heiko Cc: robh, krzk+dt, conor+dt, linux-arm-kernel, linux-rockchip, devicetree, linux-kernel, John Clark Add device tree documentation for rk3576-nanopi-m5 Signed-off-by: John Clark <inindev@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 58b9312c6c73..28db6bd6aa5b 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -300,6 +300,12 @@ properties: - friendlyarm,nanopi-r4s-enterprise - const: rockchip,rk3399 + - description: FriendlyElec NanoPi M5 series boards + items: + - enum: + - friendlyarm,nanopi-m5 + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi R5 series boards items: - enum: -- 2.39.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board 2025-06-26 5:47 ` [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board John Clark @ 2025-06-27 21:20 ` Rob Herring (Arm) 0 siblings, 0 replies; 5+ messages in thread From: Rob Herring (Arm) @ 2025-06-27 21:20 UTC (permalink / raw) To: John Clark Cc: krzk+dt, linux-rockchip, linux-kernel, conor+dt, linux-arm-kernel, devicetree, heiko On Thu, 26 Jun 2025 01:47:27 -0400, John Clark wrote: > Add device tree documentation for rk3576-nanopi-m5 > > Signed-off-by: John Clark <inindev@gmail.com> > --- > Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > Acked-by: Rob Herring (Arm) <robh@kernel.org> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support 2025-06-26 5:47 [PATCH v4 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576 John Clark 2025-06-26 5:47 ` [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board John Clark @ 2025-06-26 5:47 ` John Clark 2025-06-27 14:57 ` Jonas Karlman 1 sibling, 1 reply; 5+ messages in thread From: John Clark @ 2025-06-26 5:47 UTC (permalink / raw) To: heiko Cc: robh, krzk+dt, conor+dt, linux-arm-kernel, linux-rockchip, devicetree, linux-kernel, John Clark Add device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables basic booting and connectivity. Supported features: - RK3576 SoC - 4GB/8GB/16GB LPDDR4X/LPDDR5 RAM - 16MB SPI Nor Flash - 2x 1Gbps Ethernet - 2x USB 3.2 Gen 1 Type-A ports - microSD UHS-I - M.2 M-Key PCIe 2.1 x1 NVMe support - HDMI 1.4/2.0 (up to 4096x2304@60Hz) - 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO) - Debug UART - RTC with HYM8563TS - Power via USB-C (PD, 6V~20V) Signed-off-by: John Clark <inindev@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ 2 files changed, 1000 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index e43565c53c56..099520962ffb 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file mode 100644 index 000000000000..4b9c1ac44919 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts @@ -0,0 +1,999 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. + * Copyright (c) 2025 John Clark <inindev@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3576.dtsi" + +/ { + model = "FriendlyElec NanoPi M5"; + compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc_5v0_hdmi>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + button-user { + debounce-interval = <50>; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "User"; + linux,code = <BTN_1>; + pinctrl-names = "default"; + pinctrl-0 = <&button_user_pin>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_led: led-0 { + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "sys_led"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + }; + + lan_led: led-1 { + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; + label = "lan_led"; + pinctrl-names = "default"; + pinctrl-0 = <&lan_led_pin>; + }; + + wan_led: led-2 { + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + label = "wan_led"; + pinctrl-names = "default"; + pinctrl-0 = <&wan_led_pin>; + }; + }; + + vcc_12v_dcin: regulator-vcc-12v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc_12v_dcin"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_m2_keym: regulator-vcc-3v3-m2_keym { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_pwren>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_m2_keym"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwren>; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_device: regulator-vcc-5v0-device { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_device"; + vin-supply = <&vcc_12v_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_con_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_hdmi"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_host: regulator-vcc-5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_host"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_otg: regulator-vcc-5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_otg"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_sys"; + vin-supply = <&vcc_12v_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "realtek,rt5616-codec"; + + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "IN1P", "Microphone Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack"; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&fspi1m1_pins { + /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */ + /* gpio1_d0-d4 muxed to sai2 audio functions */ + rockchip,pins = + <1 RK_PD5 3 &pcfg_pull_none>, + <1 RK_PC4 3 &pcfg_pull_none>, + <1 RK_PC5 3 &pcfg_pull_none>, + <1 RK_PC6 3 &pcfg_pull_none>, + <1 RK_PC7 3 &pcfg_pull_none>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim + ð0m0_tx_bus2 + ð0m0_rx_bus2 + ð0m0_rgmii_clk + ð0m0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð1m0_miim + ð1m0_tx_bus2 + ð1m0_rx_bus2 + ð1m0_rgmii_clk + ð1m0_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m3_xfer>; + status = "okay"; + + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + assigned-clocks = <&cru CLK_SAI2_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru CLK_SAI2_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&mdio0 { + rgmii_phy0: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_int>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC1_OUT>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_int>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_reset>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_keym>; + status = "okay"; +}; + +&pinctrl { + gmac { + gmac0_int: gmac0-int { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_int: gmac1-int { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_con_en: hdmi-con-en { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + button_user_pin: button-user-pin { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sys_led_pin: sys-led-pin { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + wan_led_pin: wan-led-pin { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_m2_pwren: pcie-m2-pwren { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_m2_reset: pcie-m2-reset { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sd_s0_pwren: sd-s0-pwren { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sound { + hp_det: hp-det { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren: usb-otg0-pwren { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rng { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_3v3_sd_s0>; + status = "okay"; +}; + +&sfc1 { + pinctrl-names = "default"; + pinctrl-0 = <&fspi1m1_csn0 &fspi1m1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc_5v0_otg>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "otg"; + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&wdt { + status= "okay"; +}; -- 2.39.5 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support 2025-06-26 5:47 ` [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support John Clark @ 2025-06-27 14:57 ` Jonas Karlman 0 siblings, 0 replies; 5+ messages in thread From: Jonas Karlman @ 2025-06-27 14:57 UTC (permalink / raw) To: John Clark, heiko@sntech.de Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Hi John, On 2025-06-26 07:47, John Clark wrote: > Add device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC > (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables > basic booting and connectivity. > > Supported features: > - RK3576 SoC > - 4GB/8GB/16GB LPDDR4X/LPDDR5 RAM > - 16MB SPI Nor Flash > - 2x 1Gbps Ethernet > - 2x USB 3.2 Gen 1 Type-A ports > - microSD UHS-I > - M.2 M-Key PCIe 2.1 x1 NVMe support > - HDMI 1.4/2.0 (up to 4096x2304@60Hz) > - 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO) > - Debug UART > - RTC with HYM8563TS > - Power via USB-C (PD, 6V~20V) > > Signed-off-by: John Clark <inindev@gmail.com> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ > 2 files changed, 1000 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index e43565c53c56..099520962ffb 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts > new file mode 100644 > index 000000000000..4b9c1ac44919 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts > @@ -0,0 +1,999 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. > + * Copyright (c) 2025 John Clark <inindev@gmail.com> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/pwm/pwm.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include <dt-bindings/usb/pd.h> > +#include "rk3576.dtsi" > + > +/ { > + model = "FriendlyElec NanoPi M5"; > + compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576"; > + > + aliases { > + ethernet0 = &gmac0; > + ethernet1 = &gmac1; Do we need to add mmc0 alias here? > + }; > + > + chosen { > + stdout-path = "serial0:1500000n8"; > + }; > + > + hdmi-con { > + compatible = "hdmi-connector"; > + hdmi-pwr-supply = <&vcc_5v0_hdmi>; Schematic names this vcc5v_hdmi_tx for the HDMI +5V Power pin. > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > + keys { > + compatible = "gpio-keys"; > + > + button-user { > + debounce-interval = <50>; > + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; > + label = "User"; > + linux,code = <BTN_1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&button_user_pin>; usr_button is used in schematics, maybe usr_button_pin? > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + sys_led: led-0 { > + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; > + label = "sys_led"; Please use color and function props, you can skip label or use SYS as printed on the board. > + linux,default-trigger = "heartbeat"; > + pinctrl-names = "default"; > + pinctrl-0 = <&sys_led_pin>; Schematic use led_sys_h for this pin. > + }; > + > + lan_led: led-1 { > + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; > + label = "lan_led"; Same as above, use color and function props, this is named LED2. > + pinctrl-names = "default"; > + pinctrl-0 = <&lan_led_pin>; Schematic use led2_h for this pin. > + }; > + > + wan_led: led-2 { > + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; > + label = "wan_led"; Same as above, use color and function props, this is named LED1. > + pinctrl-names = "default"; > + pinctrl-0 = <&wan_led_pin>; Schematic use led1_h for this pin. > + }; > + }; > + > + vcc_12v_dcin: regulator-vcc-12v-dcin { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-name = "vcc_12v_dcin"; This is named 6~20v_dcin or vcc12v_dcin in schematics. > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; Is all these regulator-state-mem nodes needed for regulator-fixed? > + }; > + > + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { > + compatible = "regulator-fixed"; > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-name = "vcc_1v1_nldo_s3"; > + vin-supply = <&vcc_5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { > + compatible = "regulator-fixed"; > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-name = "vcc_2v0_pldo_s3"; > + vin-supply = <&vcc_5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_m2_keym: regulator-vcc-3v3-m2_keym { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_m2_pwren>; This is called pcie0_pwren_h in schematic. > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_3v3_m2_keym"; This is named vcc3v3_m2_keym in schematic. > + vin-supply = <&vcc_5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3_s0: regulator-vcc-3v3-s0 { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_3v3_s0"; > + vin-supply = <&vcc_3v3_s3>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd_s0_pwren>; This is called sdmmc0_pwren_h in schematic. > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; Should be 3.3v not 3.0v? > + regulator-name = "vcc_3v3_sd_s0"; This is called vcc3v3_sd_s0 in schematic. > + vin-supply = <&vcc_3v3_s3>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_5v0_device: regulator-vcc-5v0-device { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc_5v0_device"; I cannot find this regulator in the schematic, only vcc5v0_sys_s5. > + vin-supply = <&vcc_12v_dcin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; This is used to switch between HDMI2.0(TMDS) and HDMI2.1(FRL) mode, and should probably not be modeled as a regulator. > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_con_en>; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc_5v0_hdmi"; Schematics use vcc5v_hdmi_tx for the HDMI +5V pin. > + vin-supply = <&vcc_5v0_sys>; This should be vcc5v0_sys_s5. > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_5v0_host: regulator-vcc-5v0-host { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_host_pwren>; This is called usb3_host_pwren_h in schematic. > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc_5v0_host"; This is called usb3_port2_5v in schematic. > + vin-supply = <&vcc_5v0_device>; This should be vcc5v0_sys_s5. > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_5v0_otg: regulator-vcc-5v0-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_otg0_pwren>; This is called usb_otg0_pwren_h in schematic. > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc_5v0_otg"; This is called vcc5v0_usb_otg0 in the schematic. > + vin-supply = <&vcc_5v0_device>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_5v0_sys: regulator-vcc-5v0-sys { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc_5v0_sys"; This is called vcc5v0_sys_s5 in the schematic. > + vin-supply = <&vcc_12v_dcin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + sound { > + compatible = "simple-audio-card"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_det>; This is called hp_det_l in schematic. > + > + simple-audio-card,format = "i2s"; > + simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; > + simple-audio-card,mclk-fs = <256>; > + simple-audio-card,name = "realtek,rt5616-codec"; > + > + simple-audio-card,routing = > + "Headphones", "HPOL", > + "Headphones", "HPOR", > + "IN1P", "Microphone Jack"; > + simple-audio-card,widgets = > + "Headphone", "Headphone Jack", > + "Microphone", "Microphone Jack"; > + > + simple-audio-card,codec { > + sound-dai = <&rt5616>; > + }; > + > + simple-audio-card,cpu { > + sound-dai = <&sai2>; > + }; > + }; > +}; > + > +&combphy0_ps { > + status = "okay"; > +}; > + > +&combphy1_psu { > + status = "okay"; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_big_s0>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_big_s0>; > +}; > + > +&cpu_b2 { > + cpu-supply = <&vdd_cpu_big_s0>; > +}; > + > +&cpu_b3 { > + cpu-supply = <&vdd_cpu_big_s0>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_lit_s0>; > +}; > + > +&fspi1m1_pins { > + /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */ > + /* gpio1_d0-d4 muxed to sai2 audio functions */ > + rockchip,pins = > + <1 RK_PD5 3 &pcfg_pull_none>, > + <1 RK_PC4 3 &pcfg_pull_none>, > + <1 RK_PC5 3 &pcfg_pull_none>, > + <1 RK_PC6 3 &pcfg_pull_none>, > + <1 RK_PC7 3 &pcfg_pull_none>; > +}; > + > +&gmac0 { > + clock_in_out = "output"; > + phy-handle = <&rgmii_phy0>; > + phy-mode = "rgmii-id"; > + phy-supply = <&vcc_3v3_s3>; > + pinctrl-names = "default"; > + pinctrl-0 = <ð0m0_miim > + ð0m0_tx_bus2 > + ð0m0_rx_bus2 > + ð0m0_rgmii_clk > + ð0m0_rgmii_bus>; > + status = "okay"; > +}; > + > +&gmac1 { > + clock_in_out = "output"; > + phy-handle = <&rgmii_phy1>; > + phy-mode = "rgmii-id"; > + phy-supply = <&vcc_3v3_s3>; > + pinctrl-names = "default"; > + pinctrl-0 = <ð1m0_miim > + ð1m0_tx_bus2 > + ð1m0_rx_bus2 > + ð1m0_rgmii_clk > + ð1m0_rgmii_bus>; > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu_s0>; > + status = "okay"; > +}; > + > +&hdmi { > + status = "okay"; > +}; > + > +&hdmi_in { > + hdmi_in_vp0: endpoint { > + remote-endpoint = <&vp0_out_hdmi>; > + }; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&hdptxphy { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > + > + pmic@23 { > + compatible = "rockchip,rk806"; > + reg = <0x23>; > + #gpio-cells = <2>; > + gpio-controller; > + interrupt-parent = <&gpio0>; > + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, > + <&rk806_dvs2_null>, <&rk806_dvs3_null>; > + system-power-controller; > + > + vcc1-supply = <&vcc_5v0_sys>; > + vcc2-supply = <&vcc_5v0_sys>; > + vcc3-supply = <&vcc_5v0_sys>; > + vcc4-supply = <&vcc_5v0_sys>; > + vcc5-supply = <&vcc_5v0_sys>; > + vcc6-supply = <&vcc_5v0_sys>; > + vcc7-supply = <&vcc_5v0_sys>; > + vcc8-supply = <&vcc_5v0_sys>; > + vcc9-supply = <&vcc_5v0_sys>; > + vcc10-supply = <&vcc_5v0_sys>; > + vcc11-supply = <&vcc_2v0_pldo_s3>; > + vcc12-supply = <&vcc_5v0_sys>; > + vcc13-supply = <&vcc_1v1_nldo_s3>; > + vcc14-supply = <&vcc_1v1_nldo_s3>; > + vcca-supply = <&vcc_5v0_sys>; > + > + rk806_dvs1_null: dvs1-null-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs1_slp: dvs1-slp-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun1"; > + }; > + > + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun2"; > + }; > + > + rk806_dvs1_rst: dvs1-rst-pins { > + pins = "gpio_pwrctrl1"; > + function = "pin_fun3"; > + }; > + > + rk806_dvs2_null: dvs2-null-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs2_slp: dvs2-slp-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun1"; > + }; > + > + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun2"; > + }; > + > + rk806_dvs2_rst: dvs2-rst-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun3"; > + }; > + > + rk806_dvs2_dvs: dvs2-dvs-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun4"; > + }; > + > + rk806_dvs2_gpio: dvs2-gpio-pins { > + pins = "gpio_pwrctrl2"; > + function = "pin_fun5"; > + }; > + > + rk806_dvs3_null: dvs3-null-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun0"; > + }; > + > + rk806_dvs3_slp: dvs3-slp-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun1"; > + }; > + > + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun2"; > + }; > + > + rk806_dvs3_rst: dvs3-rst-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun3"; > + }; > + > + rk806_dvs3_dvs: dvs3-dvs-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun4"; > + }; > + > + rk806_dvs3_gpio: dvs3-gpio-pins { > + pins = "gpio_pwrctrl3"; > + function = "pin_fun5"; > + }; > + > + regulators { > + vdd_cpu_big_s0: dcdc-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-enable-ramp-delay = <400>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-name = "vdd_cpu_big_s0"; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_npu_s0: dcdc-reg2 { > + regulator-boot-on; > + regulator-enable-ramp-delay = <400>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-name = "vdd_npu_s0"; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_lit_s0: dcdc-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <950000>; > + regulator-name = "vdd_cpu_lit_s0"; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vcc_3v3_s3: dcdc-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_3v3_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vdd_gpu_s0: dcdc-reg5 { > + regulator-boot-on; > + regulator-enable-ramp-delay = <400>; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdd_gpu_s0"; > + regulator-ramp-delay = <12500>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <850000>; > + }; > + }; > + > + vddq_ddr_s0: dcdc-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vddq_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_logic_s0: dcdc-reg7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <800000>; > + regulator-name = "vdd_logic_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8_s3: dcdc-reg8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd2_ddr_s3: dcdc-reg9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vdd2_ddr_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vdd_ddr_s0: dcdc-reg10 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1200000>; > + regulator-name = "vdd_ddr_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca_1v8_s0: pldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca_1v8_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_pldo2_s0: pldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_pldo2_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_1v2_s0: pldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-name = "vdda_1v2_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca_3v3_s0: pldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcca_3v3_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd_s0: pldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_pldo6_s3: pldo-reg6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_pldo6_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_0v75_s3: nldo-reg1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdd_0v75_s3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <750000>; > + }; > + }; > + > + vdda_ddr_pll_s0: nldo-reg2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdda_ddr_pll_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v75_hdmi_s0: nldo-reg3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <837500>; > + regulator-max-microvolt = <837500>; > + regulator-name = "vdda0v75_hdmi_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v85_s0: nldo-reg4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-name = "vdda_0v85_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v75_s0: nldo-reg5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <750000>; > + regulator-name = "vdda_0v75_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + hym8563: rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-output-names = "hym8563"; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hym8563_int>; > + wakeup-source; > + }; > +}; > + > +&i2c5 { > + clock-frequency = <200000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c5m3_xfer>; > + status = "okay"; > + > + rt5616: audio-codec@1b { > + compatible = "realtek,rt5616"; > + reg = <0x1b>; > + assigned-clocks = <&cru CLK_SAI2_MCLKOUT>; > + assigned-clock-rates = <12288000>; > + clocks = <&cru CLK_SAI2_MCLKOUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&mdio0 { > + rgmii_phy0: phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1>; > + clocks = <&cru REFCLKO25M_GMAC0_OUT>; > + interrupt-parent = <&gpio2>; > + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac0_int>; This is missing pinctrl for the reset-gpios pin. > + reset-assert-us = <20000>; > + reset-deassert-us = <100000>; > + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&mdio1 { > + rgmii_phy1: phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1>; > + clocks = <&cru REFCLKO25M_GMAC1_OUT>; > + interrupt-parent = <&gpio3>; > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac1_int>; This is missing pinctrl for the reset-gpios pin. > + reset-assert-us = <20000>; > + reset-deassert-us = <100000>; > + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&pcie0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_m2_reset>; This is called pcie0_perstn in schematic. > + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; > + vpcie3v3-supply = <&vcc_3v3_m2_keym>; > + status = "okay"; > +}; > + > +&pinctrl { > + gmac { > + gmac0_int: gmac0-int { > + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + gmac0_rst: gmac0-rst { > + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + gmac1_int: gmac1-int { > + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + gmac1_rst: gmac1-rst { > + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + hdmi { > + hdmi_con_en: hdmi-con-en { > + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + hym8563 { > + hym8563_int: hym8563-int { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + keys { > + button_user_pin: button-user-pin { > + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + sys_led_pin: sys-led-pin { > + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + lan_led_pin: lan-led-pin { > + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + wan_led_pin: wan-led-pin { > + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pcie { > + pcie_m2_pwren: pcie-m2-pwren { > + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + pcie_m2_reset: pcie-m2-reset { > + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + sdmmc { > + sd_s0_pwren: sd-s0-pwren { > + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + sound { > + hp_det: hp-det { > + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb { > + usb_host_pwren: usb-host-pwren { > + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + usb_otg0_pwren: usb-otg0-pwren { > + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&rng { > + status = "okay"; This is default for the SoC so this can be dropped. > +}; > + > +&sai2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca_1v8_s0>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + disable-wp; > + no-mmc; > + no-sdio; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_bus4>; Please use the <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4> format, will include more schemantic information for parsers. > + sd-uhs-sdr104; > + vmmc-supply = <&vcc_3v3_s3>; > + vqmmc-supply = <&vcc_3v3_sd_s0>; > + status = "okay"; > +}; > + > +&sfc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&fspi1m1_csn0 &fspi1m1_pins>; Same here. > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + m25p,fast-read; > + spi-max-frequency = <20000000>; For U-Boot I tested with 50 MHz, any reason why this is so low? Please check datasheet for the SPI-flash module. Regards, Jonas > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <1>; > + vcc-supply = <&vcc_1v8_s3>; > + }; > +}; > + > +&u2phy0 { > + status = "okay"; > +}; > + > +&u2phy0_otg { > + phy-supply = <&vcc_5v0_otg>; > + status = "okay"; > +}; > + > +&u2phy1 { > + status = "okay"; > +}; > + > +&u2phy1_otg { > + phy-supply = <&vcc_5v0_host>; > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&usbdp_phy { > + status = "okay"; > +}; > + > +&usb_drd0_dwc3 { > + dr_mode = "otg"; > + extcon = <&u2phy0>; > + status = "okay"; > +}; > + > +&usb_drd1_dwc3 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&vop { > + status = "okay"; > +}; > + > +&vop_mmu { > + status = "okay"; > +}; > + > +&vp0 { > + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > + reg = <ROCKCHIP_VOP2_EP_HDMI0>; > + remote-endpoint = <&hdmi_in_vp0>; > + }; > +}; > + > +&wdt { > + status= "okay"; > +}; ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-06-27 21:20 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-06-26 5:47 [PATCH v4 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576 John Clark 2025-06-26 5:47 ` [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board John Clark 2025-06-27 21:20 ` Rob Herring (Arm) 2025-06-26 5:47 ` [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support John Clark 2025-06-27 14:57 ` Jonas Karlman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).