From: Rob Herring <robh@kernel.org>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: sboyd@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
matthias.bgg@gmail.com, hsin-hsiung.wang@mediatek.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, kernel@collabora.com
Subject: Re: [PATCH v1 1/5] dt-bindings: spmi: Add MediaTek MT8196 SPMI 2 Arbiter/Controllers
Date: Fri, 27 Jun 2025 15:07:35 -0500 [thread overview]
Message-ID: <20250627200735.GA4094329-robh@kernel.org> (raw)
In-Reply-To: <20250623120047.108961-2-angelogioacchino.delregno@collabora.com>
On Mon, Jun 23, 2025 at 02:00:43PM +0200, AngeloGioacchino Del Regno wrote:
> Document the MT8196 SPMI 2.0 Controller with a new schema.
> This is a MIPI SPMI 2.0 compliant IP, composed of a main arbiter
> and two SPMI master controllers with Request Capable Slave (RCS)
> support.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> .../bindings/spmi/mediatek,mt8196-spmi.yaml | 138 ++++++++++++++++++
> 1 file changed, 138 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spmi/mediatek,mt8196-spmi.yaml
>
> diff --git a/Documentation/devicetree/bindings/spmi/mediatek,mt8196-spmi.yaml b/Documentation/devicetree/bindings/spmi/mediatek,mt8196-spmi.yaml
> new file mode 100644
> index 000000000000..d7eb63e81a5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spmi/mediatek,mt8196-spmi.yaml
> @@ -0,0 +1,138 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spmi/mediatek,mt8196-spmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT8196 SPMI 2.0 Controller
> +
> +maintainers:
> + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> +
> +description:
> + The MediaTek MT8196 SoC features a SPMI version 2.0 compliant controller,
> + with internal wrapping arbitration logic to allow for multiple on-chip
> + devices to control up to two SPMI buses.
> + The main arbiter also acts as an interrupt controller, arbitering also
> + the interrupts coming from SPMI-connected devices into each of the nested
> + interrupt controllers from any of the present SPMI buses.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt8196-spmi
> + - items:
> + - enum:
> + - mediatek,mt6991-spmi
> + - const: mediatek,mt8196-spmi
> +
> + ranges: true
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> +patternProperties:
> + "^spmi@[a-f0-9]+$":
> + type: object
> + $ref: /schemas/spmi/spmi.yaml
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + items:
> + - description: controller interface registers
> + - description: spmi master controller registers
> +
> + reg-names:
> + items:
> + - const: pmif
> + - const: spmimst
> +
> + clocks:
> + items:
> + - description: controller interface system clock
> + - description: controller interface timer clock
> + - description: spmi controller master clock
> +
> + clock-names:
> + items:
> + - const: pmif_sys_ck
> + - const: pmif_tmr_ck
> + - const: spmimst_clk_mux
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + const: rcs
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 3
> + description: |
> + cell 1: slave ID for the requested interrupt (0-15)
> + cell 2: the requested peripheral interrupt (0-7)
> + cell 3: interrupt flags indicating level-sense information,
> + as defined in dt-bindings/interrupt-controller/irq.h
> + required:
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +required:
> + - compatible
> + - ranges
> + - '#address-cells'
> + - '#size-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + spmi-arbiter@1c018000 {
> + compatible = "mediatek,mt8196-spmi";
> + ranges = <0 0 0x1c018000 0x4900>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + spmi@0 {
> + reg = <0 0x900>, <0x4800 0x100>;
> + reg-names = "pmif", "spmimst";
> + interrupts-extended = <&pio 292 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rcs";
> + interrupt-controller;
Indentation error.
Otherwise,
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> + #interrupt-cells = <3>;
> + clocks = <&pmif_sys>, <&pmif_tmr>, <&spmi_mst>;
> + clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
> + };
> +
> + spmi@2000 {
> + reg = <0x2000 0x900>, <0x4000 0x100>;
> + reg-names = "pmif", "spmimst";
> + interrupts-extended = <&pio 291 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rcs";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + clocks = <&pmif_sys>, <&pmif_tmr>, <&spmi_mst>;
> + clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
> + };
> + };
> + };
> +...
> --
> 2.49.0
>
next prev parent reply other threads:[~2025-06-27 20:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-23 12:00 [PATCH v1 0/5] SPMI: MediaTek: Add support for multi-bus AngeloGioacchino Del Regno
2025-06-23 12:00 ` [PATCH v1 1/5] dt-bindings: spmi: Add MediaTek MT8196 SPMI 2 Arbiter/Controllers AngeloGioacchino Del Regno
2025-06-27 20:07 ` Rob Herring [this message]
2025-06-30 12:13 ` AngeloGioacchino Del Regno
2025-06-23 12:00 ` [PATCH v1 2/5] spmi: mtk-pmif: Add multi-bus support for SPMI 2.0 AngeloGioacchino Del Regno
2025-06-23 12:00 ` [PATCH v1 3/5] spmi: mtk-pmif: Keep spinlock until read is fully done AngeloGioacchino Del Regno
2025-06-23 12:00 ` [PATCH v1 4/5] spmi: mtk-pmif: Implement Request Capable Slave (RCS) interrupt AngeloGioacchino Del Regno
2025-06-23 12:00 ` [PATCH v1 5/5] spmi: mtk-pmif: Add support for MT8196 SPMI Controller AngeloGioacchino Del Regno
2025-06-24 14:51 ` [PATCH v1 0/5] SPMI: MediaTek: Add support for multi-bus Nícolas F. R. A. Prado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250627200735.GA4094329-robh@kernel.org \
--to=robh@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).