[PATCH v6 00/15] further mt7988 devicetree work

[PATCH v6 00/15] further mt7988 devicetree work

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Resend due my linux.dev mailbox stopped sending due to many recipients.

This series continues mt7988 devicetree work

- Extend cpu frequency scaling with CCI
- GPIO leds
- Basic network-support (ethernet controller + builtin switch + SFP Cages)

depencies (i hope this list is complete and latest patches/series linked):

support interrupt-names is optional again as i re-added the reserved IRQs
(they are not unusable as i thought and can allow features in future)
https://patchwork.kernel.org/project/netdevbpf/patch/20250619132125.78368-2-linux@fw-web.de/

needs change in mtk ethernet driver for the sram to be read from separate node:
https://patchwork.kernel.org/project/netdevbpf/patch/566ca90fc59ad0d3aff8bc8dc22ebaf0544bce47.1751072868.git.daniel@makrotopia.org/

for SFP-Function (macs currently disabled):

PCS clearance which is a 1.5 year discussion currently ongoing

Daniel asked netdev for a way 2 go:
https://lore.kernel.org/netdev/aEwfME3dYisQtdCj@pidgin.makrotopia.org/

e.g. something like this (one of):
* https://patchwork.kernel.org/project/netdevbpf/patch/20250610233134.3588011-4-sean.anderson@linux.dev/ (v6)
* https://patchwork.kernel.org/project/netdevbpf/patch/20250511201250.3789083-4-ansuelsmth@gmail.com/ (v4)
* https://patchwork.kernel.org/project/netdevbpf/patch/ba4e359584a6b3bc4b3470822c42186d5b0856f9.1721910728.git.daniel@makrotopia.org/

full usxgmii driver:
https://patchwork.kernel.org/project/netdevbpf/patch/07845ec900ba41ff992875dce12c622277592c32.1702352117.git.daniel@makrotopia.org/

first PCS-discussion is here:
https://patchwork.kernel.org/project/netdevbpf/patch/8aa905080bdb6760875d62cb3b2b41258837f80e.1702352117.git.daniel@makrotopia.org/
some more here:
https://lore.kernel.org/netdev/20250511201250.3789083-4-ansuelsmth@gmail.com/

and then dts nodes for sgmiisys+usxgmii+2g5 firmware

when above depencies are solved the mac1/2 can be enabled and 2.5G phy/SFP slots will work.

changes:
v6:
binding:
- split out the interrupt-names into separate patch
- update irq(name) min count to 4
- move interrupt-names up
- add sram-property
- drop second reg entry and minitems as there is only 1 item left

dts:
- fix whitespace-errors for pdma irqs (spaces vs. tabs)
- move sram from eth reg to own sram node (needs CONFIG_SRAM)

v5:
- add reserved irqs and change names
- update binding for 8 irqs with different names (rx,tx => fe1+fe2, rx-ringX => pdmaX)
(dropped Robs RB due to this change again, sorry)

v4:
net-binding:
- allow interrupt names and increase max interrupts to 6 because of RSS/LRO interrupts
  (dropped Robs RB due to this change)

dts-patches:
- add interrupts for RSS/LRO and interrupt-names for ethernet node
- eth-reg and clock whitespace-fix
- comment for fixed-link on gmac0
- drop phy-mode properties as suggested by andrew
- drop phy-connection-type on 2g5 board
- reorder some properties
- update 2g5 phy node
- unit-name dec instead of hex to match reg property
- move compatible before reg
- drop phy-mode

v3:
- dropped patches already applied (SPI+thermal)
- added soc specific cci compatible (new binding patch + changed dts)
- enable 2g5 phy because driver is now merged
- add patch for cleaning up unnecessary pins
- add patch for gpio-leds
- add patch for adding ethernet aliases

v2:
- change reg to list of items in eth binding
- changed mt7530 binding:
- unevaluatedProperties=false
- mediatek,pio subproperty
- from patternProperty to property
- board specific properties like led function and labels moved to bpi-r4 dtsi


Frank Wunderlich (15):
  dt-bindings: net: mediatek,net: update for mt7988
  dt-bindings: net: mediatek,net: allow irq names
  dt-bindings: net: mediatek,net: update for mt7988
  dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for
    mt7988
  dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus
  dt-bindings: interconnect: add mt7988-cci compatible
  arm64: dts: mediatek: mt7988: add cci node
  arm64: dts: mediatek: mt7988: add basic ethernet-nodes
  arm64: dts: mediatek: mt7988: add switch node
  arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci
  arm64: dts: mediatek: mt7988a-bpi-r4: drop unused pins
  arm64: dts: mediatek: mt7988a-bpi-r4: add gpio leds
  arm64: dts: mediatek: mt7988a-bpi-r4: add aliases for ethernet
  arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac
  arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds

 .../bindings/interconnect/mediatek,cci.yaml   |  11 +-
 .../bindings/net/dsa/mediatek,mt7530.yaml     |  24 +-
 .../devicetree/bindings/net/mediatek,net.yaml |  47 ++-
 .../mediatek/mt7988a-bananapi-bpi-r4-2g5.dts  |  11 +
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  |  19 ++
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 198 ++++++-----
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi     | 318 +++++++++++++++++-
 7 files changed, 529 insertions(+), 99 deletions(-)

-- 
2.43.0

[PATCH v6 01/15] dt-bindings: net: mediatek,net: update for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Update binding for mt7988 which has 3 gmac and a sram for dma
operations.

MT7988 has 4 FE IRQs (currently only 2 are used) and 4 IRQs for use
with RSS/LRO later.
Add interrupt-names to make them accessible by name.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v6:
- update irq(name) min count to 4
- move interrupt-names up and limiting for all socs below
- add sram-property and drop second reg entry
- drop minitems as there is only 1 item left now

v5:
- fix v4 logmessage and change description a bit describing how i get
  the irq count.
- update binding for 8 irqs with different names (rx,tx => fe0..fe3)
  including the 2 reserved irqs which can be used later
- change rx-ringX to pdmaX to be closer to hardware documentation

v4:
- increase max interrupts to 6 because of adding RSS/LRO interrupts (4)
  and dropping 2 reserved irqs (0+3) around rx+tx
- dropped Robs RB due to this change
- allow interrupt names
- add interrupt-names without reserved IRQs on mt7988
  this requires mtk driver patch:
  https://patchwork.kernel.org/project/netdevbpf/patch/20250616080738.117993-2-linux@fw-web.de/

v2:
- change reg to list of items
---
 .../devicetree/bindings/net/mediatek,net.yaml | 47 +++++++++++++++++--
 1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
index 9e02fd80af83..74a139000f60 100644
--- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -28,7 +28,8 @@ properties:
       - ralink,rt5350-eth
 
   reg:
-    maxItems: 1
+    items:
+      - description: Register for accessing the MACs.
 
   clocks:
     minItems: 2
@@ -40,7 +41,19 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 4
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: fe0
+      - const: fe1
+      - const: fe2
+      - const: fe3
+      - const: pdma0
+      - const: pdma1
+      - const: pdma2
+      - const: pdma3
 
   power-domains:
     maxItems: 1
@@ -54,6 +67,10 @@ properties:
       - const: gmac
       - const: ppe
 
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to mmio SRAM
+
   mediatek,ethsys:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -135,6 +152,10 @@ allOf:
           minItems: 3
           maxItems: 3
 
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
         clocks:
           minItems: 4
           maxItems: 4
@@ -166,6 +187,9 @@ allOf:
         interrupts:
           maxItems: 1
 
+        interrupt-namess:
+          maxItems: 1
+
         clocks:
           minItems: 2
           maxItems: 2
@@ -192,6 +216,10 @@ allOf:
           minItems: 3
           maxItems: 3
 
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
         clocks:
           minItems: 11
           maxItems: 11
@@ -232,6 +260,10 @@ allOf:
           minItems: 3
           maxItems: 3
 
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
         clocks:
           minItems: 17
           maxItems: 17
@@ -274,6 +306,9 @@ allOf:
         interrupts:
           minItems: 4
 
+        interrupt-names:
+          minItems: 4
+
         clocks:
           minItems: 15
           maxItems: 15
@@ -312,6 +347,9 @@ allOf:
         interrupts:
           minItems: 4
 
+        interrupt-names:
+          minItems: 4
+
         clocks:
           minItems: 15
           maxItems: 15
@@ -350,6 +388,9 @@ allOf:
         interrupts:
           minItems: 4
 
+        interrupt-names:
+          minItems: 4
+
         clocks:
           minItems: 24
           maxItems: 24
@@ -382,7 +423,7 @@ allOf:
             - const: xgp3
 
 patternProperties:
-  "^mac@[0-1]$":
+  "^mac@[0-2]$":
     type: object
     unevaluatedProperties: false
     allOf:
-- 
2.43.0

[PATCH v6 02/15] dt-bindings: net: mediatek,net: allow irq names

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

In preparation for MT7988 and RSS/LRO allow the interrupt-names
property. Also increase the maximum IRQ count to 8 (4 FE + 4 RSS),
but set boundaries for all compatibles same as irq count.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v6: new patch splitted from the mt7988 changes
---
 Documentation/devicetree/bindings/net/mediatek,net.yaml | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
index 74a139000f60..6672db206b38 100644
--- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -28,8 +28,7 @@ properties:
       - ralink,rt5350-eth
 
   reg:
-    items:
-      - description: Register for accessing the MACs.
+    maxItems: 1
 
   clocks:
     minItems: 2
@@ -67,10 +66,6 @@ properties:
       - const: gmac
       - const: ppe
 
-  sram:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: phandle to mmio SRAM
-
   mediatek,ethsys:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -423,7 +418,7 @@ allOf:
             - const: xgp3
 
 patternProperties:
-  "^mac@[0-2]$":
+  "^mac@[0-1]$":
     type: object
     unevaluatedProperties: false
     allOf:
-- 
2.43.0

[PATCH v6 03/15] dt-bindings: net: mediatek,net: update for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Update binding for mt7988 which has 3 gmac and a sram for dma
operations.

MT7988 has 4 FE IRQs (currently only 2 are used) and 4 IRQs for use
with RSS/LRO later.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v6:
- split out the interrupt-names into separate patch
- update irq(name) min count to 4
- add sram-property
- drop second reg entry and minitems as there is only 1 item left again

v5:
- fix v4 logmessage and change description a bit describing how i get
  the irq count.
- update binding for 8 irqs with different names (rx,tx => fe0..fe3)
  including the 2 reserved irqs which can be used later
- change rx-ringX to pdmaX to be closer to hardware documentation

v4:
- increase max interrupts to 6 because of adding RSS/LRO interrupts (4)
  and dropping 2 reserved irqs (0+3) around rx+tx
- dropped Robs RB due to this change
- allow interrupt names
- add interrupt-names without reserved IRQs on mt7988
  this requires mtk driver patch:
  https://patchwork.kernel.org/project/netdevbpf/patch/20250616080738.117993-2-linux@fw-web.de/

v2:
- change reg to list of items
---
 Documentation/devicetree/bindings/net/mediatek,net.yaml | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
index 6672db206b38..74a139000f60 100644
--- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -28,7 +28,8 @@ properties:
       - ralink,rt5350-eth
 
   reg:
-    maxItems: 1
+    items:
+      - description: Register for accessing the MACs.
 
   clocks:
     minItems: 2
@@ -66,6 +67,10 @@ properties:
       - const: gmac
       - const: ppe
 
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to mmio SRAM
+
   mediatek,ethsys:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -418,7 +423,7 @@ allOf:
             - const: xgp3
 
 patternProperties:
-  "^mac@[0-1]$":
+  "^mac@[0-2]$":
     type: object
     unevaluatedProperties: false
     allOf:
-- 
2.43.0

[PATCH v6 04/15] dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add own dsa-port binding for SoC with internal switch where only phy-mode
'internal' is valid.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml          | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 51205f9f2985..9b983fdbf3c7 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -190,6 +190,18 @@ required:
   - reg
 
 $defs:
+  builtin-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-6]$":
+            if:
+              required: [ ethernet ]
+            then:
+              properties:
+                phy-mode:
+                  const: internal
+
   mt7530-dsa-port:
     patternProperties:
       "^(ethernet-)?ports$":
@@ -297,7 +309,7 @@ allOf:
             - airoha,en7581-switch
             - airoha,an7583-switch
     then:
-      $ref: "#/$defs/mt7530-dsa-port"
+      $ref: "#/$defs/builtin-dsa-port"
       properties:
         gpio-controller: false
         mediatek,mcm: false
-- 
2.43.0

[PATCH v6 05/15] dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Mt7988 buildin switch has own mdio bus where ge-phys are connected.
Add related property for this.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2:
- change from patternproperty to property
- add unevaluatedProperties and mediatek,pio subproperty
---
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 9b983fdbf3c7..815a90808901 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -136,6 +136,16 @@ properties:
       See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
       details for the regulator setup on these boards.
 
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      mediatek,pio:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          Phandle pointing to the mediatek pinctrl node.
+
   mediatek,mcm:
     type: boolean
     description:
-- 
2.43.0

[PATCH v6 06/15] dt-bindings: interconnect: add mt7988-cci compatible

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatible for Mediatek MT7988 SoC with mediatek,mt8183-cci fallback
which is taken by driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
---
v2:
- no RFC
- drop "items" as sugested by conor
---
 .../bindings/interconnect/mediatek,cci.yaml           | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
index 58611ba2a0f4..4d72525f407e 100644
--- a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -17,9 +17,14 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8183-cci
-      - mediatek,mt8186-cci
+    oneOf:
+      - enum:
+          - mediatek,mt8183-cci
+          - mediatek,mt8186-cci
+      - items:
+          - enum:
+              - mediatek,mt7988-cci
+          - const: mediatek,mt8183-cci
 
   clocks:
     items:
-- 
2.43.0

[PATCH v6 07/15] arm64: dts: mediatek: mt7988: add cci node

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add cci devicetree node for cpu frequency scaling.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v3:
- add mt7988-cci compatible as suggested by angelo
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 33 +++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index c46b31f8d653..560ec86dbec0 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -12,6 +12,35 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	cci: cci {
+		compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci";
+		clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>,
+			 <&topckgen CLK_TOP_XTAL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-660000000 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-1080000000 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-microvolt = <900000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -25,6 +54,7 @@ cpu0: cpu@0 {
 				 <&topckgen CLK_TOP_XTAL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
 		cpu1: cpu@1 {
@@ -36,6 +66,7 @@ cpu1: cpu@1 {
 				 <&topckgen CLK_TOP_XTAL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
 		cpu2: cpu@2 {
@@ -47,6 +78,7 @@ cpu2: cpu@2 {
 				 <&topckgen CLK_TOP_XTAL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
 		cpu3: cpu@3 {
@@ -58,6 +90,7 @@ cpu3: cpu@3 {
 				 <&topckgen CLK_TOP_XTAL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
 		cluster0_opp: opp-table-0 {
-- 
2.43.0

[PATCH v6 08/15] arm64: dts: mediatek: mt7988: add basic ethernet-nodes

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add basic ethernet related nodes.

Mac1+2 needs pcs (sgmii+usxgmii) to work correctly which will be linked
later when driver is merged.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v6:
- fix whitespace-errors for pdma irqs (spaces vs. tabs)
- move sram from eth reg to own sram node (needs CONFIG_SRAM)

v5:
- add reserved irqs and change names to fe0..fe3
- change rx-ringX to pdmaX to be closer to documentation

v4:
- comment for fixed-link on gmac0
- update 2g5 phy node
  - unit-name dec instead of hex to match reg property
  - move compatible before reg
  - drop phy-mode
- add interrupts for RSS
- add interrupt-names and drop reserved irqs for ethernet
- some reordering
- eth-reg and clock whitespace-fix based on angelos review
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 137 +++++++++++++++++++++-
 1 file changed, 134 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 560ec86dbec0..cf765a6b1fa8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -680,7 +680,28 @@ xphyu3port0: usb-phy@11e13000 {
 			};
 		};
 
-		clock-controller@11f40000 {
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
+		};
+
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
 			resets = <&watchdog 16>;
@@ -714,19 +735,129 @@ phy_calibration_p3: calib@97c {
 			};
 		};
 
-		clock-controller@15000000 {
+		ethsys: clock-controller@15000000 {
 			compatible = "mediatek,mt7988-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		clock-controller@15031000 {
+		ethwarp: clock-controller@15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x80000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+				};
+			};
+		};
+
+		eth_sram: sram@15400000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15400000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15400000 0 0x200000>;
+		};
 	};
 
 	thermal-zones {
-- 
2.43.0

[PATCH v6 09/15] arm64: dts: mediatek: mt7988: add switch node

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add mt7988 builtin mt753x switch nodes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v4:
- drop phy-mode for gsw-phy
- reorder phy-mode after phy-handle
- drop interrupt parent from switch

v2:
- drop labels and led-function too (have to be in board)
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 148 ++++++++++++++++++++++
 1 file changed, 148 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index cf765a6b1fa8..767782a207a4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -742,6 +742,154 @@ ethsys: clock-controller@15000000 {
 			#reset-cells = <1>;
 		};
 
+		switch: switch@15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port@0 {
+					reg = <0>;
+					phy-handle = <&gsw_phy0>;
+					phy-mode = "internal";
+				};
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-handle = <&gsw_phy1>;
+					phy-mode = "internal";
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-handle = <&gsw_phy2>;
+					phy-mode = "internal";
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-handle = <&gsw_phy3>;
+					phy-mode = "internal";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
 		ethwarp: clock-controller@15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
-- 
2.43.0

[PATCH v6 10/15] arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

CCI requires proc-supply. Add it on board level.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 81ba045e0e0e..afa9e3b2b16a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -40,6 +40,10 @@ reg_3p3v: regulator-3p3v {
 	};
 };
 
+&cci {
+	proc-supply = <&rt5190_buck3>;
+};
+
 &cpu0 {
 	proc-supply = <&rt5190_buck3>;
 };
-- 
2.43.0

[PATCH v6 11/15] arm64: dts: mediatek: mt7988a-bpi-r4: drop unused pins

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Pins were moved from SoC dtsi to Board level dtsi without cleaning up
to needed ones. Drop the unused pins now.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 89 -------------------
 1 file changed, 89 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index afa9e3b2b16a..30affedf84d4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -223,18 +223,6 @@ &pcie3 {
 };
 
 &pio {
-	mdio0_pins: mdio0-pins {
-		mux {
-			function = "eth";
-			groups = "mdc_mdio0";
-		};
-
-		conf {
-			pins = "SMI_0_MDC", "SMI_0_MDIO";
-			drive-strength = <8>;
-		};
-	};
-
 	i2c0_pins: i2c0-g0-pins {
 		mux {
 			function = "i2c";
@@ -249,20 +237,6 @@ mux {
 		};
 	};
 
-	i2c1_sfp_pins: i2c1-sfp-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c1_sfp";
-		};
-	};
-
-	i2c2_0_pins: i2c2-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c2_0";
-		};
-	};
-
 	i2c2_1_pins: i2c2-g1-pins {
 		mux {
 			function = "i2c";
@@ -298,34 +272,6 @@ mux {
 		};
 	};
 
-	gbe0_led1_pins: gbe0-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe0_led1";
-		};
-	};
-
-	gbe1_led1_pins: gbe1-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe1_led1";
-		};
-	};
-
-	gbe2_led1_pins: gbe2-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe2_led1";
-		};
-	};
-
-	gbe3_led1_pins: gbe3-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe3_led1";
-		};
-	};
-
 	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
 		mux {
 			function = "led";
@@ -333,13 +279,6 @@ mux {
 		};
 	};
 
-	i2p5gbe_led1_pins: 2p5gbe-led1-pins {
-		mux {
-			function = "led";
-			groups = "2p5gbe_led1";
-		};
-	};
-
 	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
 		mux {
 			function = "flash";
@@ -361,40 +300,12 @@ mux {
 		};
 	};
 
-	snfi_pins: snfi-pins {
-		mux {
-			function = "flash";
-			groups = "snfi";
-		};
-	};
-
-	spi0_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0";
-		};
-	};
-
 	spi0_flash_pins: spi0-flash-pins {
 		mux {
 			function = "spi";
 			groups = "spi0", "spi0_wp_hold";
 		};
 	};
-
-	spi2_pins: spi2-pins {
-		mux {
-			function = "spi";
-			groups = "spi2";
-		};
-	};
-
-	spi2_flash_pins: spi2-flash-pins {
-		mux {
-			function = "spi";
-			groups = "spi2", "spi2_wp_hold";
-		};
-	};
 };
 
 &pwm {
-- 
2.43.0

[PATCH v6 12/15] arm64: dts: mediatek: mt7988a-bpi-r4: add gpio leds

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Bananapi R4 has a green and a blue led which can be switched by gpio.
Green led is for running state so default on.

Green led also shares pin with eeprom writeprotect where led off allows
writing to eeprom.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 30affedf84d4..21eb91c8609f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -21,6 +21,25 @@ fan: pwm-fan {
 		status = "okay";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue: led-blue {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
-- 
2.43.0

[PATCH v6 13/15] arm64: dts: mediatek: mt7988a-bpi-r4: add aliases for ethernet

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add aliases for gmacs to allow bootloader setting mac-adresses.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 21eb91c8609f..20073eb4d1bd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -8,6 +8,12 @@
 #include "mt7988a.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-- 
2.43.0

[PATCH v6 14/15] arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add SFP cages to Bananapi-R4 board. The 2.5g phy variant only contains the
wan-SFP, so add this to common dtsi and the lan-sfp only to the dual-SFP
variant.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v4:
- update 2g5-board (reorder and drop phy-connection-type)
- order sfp properties
v3:
- enable mac with 2.5g phy on r4 phy variant because driver is now mainline
---
 .../mediatek/mt7988a-bananapi-bpi-r4-2g5.dts  | 11 +++++++++++
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  | 19 +++++++++++++++++++
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 19 +++++++++++++++++++
 3 files changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
index 53de9c113f60..6f0c81e3fd94 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -9,3 +9,14 @@ / {
 	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
 	chassis-type = "embedded";
 };
+
+&gmac1 {
+	phy = <&int_2p5g_phy>;
+	phy-mode = "internal";
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+	pinctrl-names = "i2p5gbe-led";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 36bd1ef2efab..4b3796ba82e3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -8,6 +8,25 @@ / {
 	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
 	model = "Banana Pi BPI-R4 (2x SFP+)";
 	chassis-type = "embedded";
+
+	/* SFP2 cage (LAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gmac1 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp2>;
 };
 
 &pca9545 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 20073eb4d1bd..4d709ee527df 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -63,6 +63,19 @@ reg_3p3v: regulator-3p3v {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	/* SFP1 cage (WAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &cci {
@@ -133,6 +146,12 @@ map-cpu-active-low {
 	};
 };
 
+&gmac2 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp1>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-- 
2.43.0

[PATCH v6 15/15] arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Assign pinctrl to switch phys and leds.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v4:
- reorder switch phy(-led) properties
v2:
- add labels and led-function and include after dropping from soc dtsi
---
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 4d709ee527df..7c9df606f60d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
 
 #include "mt7988a.dtsi"
 
@@ -152,6 +153,66 @@ &gmac2 {
 	sfp = <&sfp1>;
 };
 
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	function = LED_FUNCTION_WAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "wan";
+};
+
+&gsw_phy1 {
+	pinctrl-0 = <&gbe1_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port1 {
+	label = "lan1";
+};
+
+&gsw_phy2 {
+	pinctrl-0 = <&gbe2_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port2 {
+	label = "lan2";
+};
+
+&gsw_phy3 {
+	pinctrl-0 = <&gbe3_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port3 {
+	label = "lan3";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-- 
2.43.0