[PATCH v12 0/6] reset: spacemit: add K1 reset support

[PATCH v12 0/6] reset: spacemit: add K1 reset support

[Alex Elder]

This series adds reset controller support for the SpacemiT K1 SoC.
A SpacemiT reset controller is implemented as an auxiliary device
associated with a clock controller (CCU).  A new header file
holds definitions used by both the clock and reset drivers.

The only change in this version is that three of the the four resets
associated with each PCIe port have been renamed, to align better
with their corresponding clocks.  This affects patches 1 and 5.
For example, for PCIe port 0:

    RESET_PCIE0_DBI	(no change)
    RESET_PCIE0_SLV ->	RESET_PCIE0_SLAVE
    RESET_PCIE0_MSTR ->	RESET_PCIE0_MASTER
    RESET_PCIE0_GLB ->	RESET_PCIE0_GLOBAL (no corresponding clock)

No other code has changed since v11.

All of these patches are available here:
  https://github.com/riscstar/linux/tree/outgoing/reset-v12

					-Alex

Between version 11 and version 12:
  - Renamed PCIe resets to align with their clock counterparts

Here is version 11 of this series.
  https://lore.kernel.org/lkml/20250613011139.1201702-1-elder@riscstar.com/

Between version 10 and version 11:
  - Rebased onto Linux v6.16-rc1
  - Redefined several "multi-bit" resets as individual ones.

Here is version 10 of this series.
  https://lore.kernel.org/lkml/20250513215345.3631593-1-elder@riscstar.com/

All other history is available via that link, so I won't reproduce
it again here.

Alex Elder (6):
  dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
  soc: spacemit: create a header for clock/reset registers
  clk: spacemit: set up reset auxiliary devices
  clk: spacemit: define three reset-only CCUs
  reset: spacemit: add support for SpacemiT CCU resets
  riscv: dts: spacemit: add reset support for the K1 SoC

 .../soc/spacemit/spacemit,k1-syscon.yaml      |  29 +-
 arch/riscv/boot/dts/spacemit/k1.dtsi          |  18 ++
 drivers/clk/spacemit/Kconfig                  |   1 +
 drivers/clk/spacemit/ccu-k1.c                 | 239 +++++++-------
 drivers/reset/Kconfig                         |   9 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-spacemit.c                | 304 ++++++++++++++++++
 .../dt-bindings/clock/spacemit,k1-syscon.h    | 141 ++++++++
 include/soc/spacemit/k1-syscon.h              | 160 +++++++++
 9 files changed, 775 insertions(+), 127 deletions(-)
 create mode 100644 drivers/reset/reset-spacemit.c
 create mode 100644 include/soc/spacemit/k1-syscon.h


base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
-- 
2.45.2


Alex Elder (6):
  dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
  soc: spacemit: create a header for clock/reset registers
  clk: spacemit: set up reset auxiliary devices
  clk: spacemit: define three reset-only CCUs
  reset: spacemit: add support for SpacemiT CCU resets
  riscv: dts: spacemit: add reset support for the K1 SoC

 .../soc/spacemit/spacemit,k1-syscon.yaml      |  29 +-
 arch/riscv/boot/dts/spacemit/k1.dtsi          |  18 ++
 drivers/clk/spacemit/Kconfig                  |   1 +
 drivers/clk/spacemit/ccu-k1.c                 | 239 +++++++-------
 drivers/reset/Kconfig                         |   9 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-spacemit.c                | 304 ++++++++++++++++++
 .../dt-bindings/clock/spacemit,k1-syscon.h    | 141 ++++++++
 include/soc/spacemit/k1-syscon.h              | 160 +++++++++
 9 files changed, 775 insertions(+), 127 deletions(-)
 create mode 100644 drivers/reset/reset-spacemit.c
 create mode 100644 include/soc/spacemit/k1-syscon.h


base-commit: 50c8770a42faf8b1c7abe93e7c114337f580a97d
-- 
2.45.2

[PATCH v12 1/6] dt-bindings: soc: spacemit: define spacemit,k1-ccu resets

[Alex Elder]

There are additional SpacemiT syscon CCUs whose registers control both
clocks and resets:  RCPU, RCPU2, and APBC2. Unlike those defined
previously, these will (initially) support only resets.  They do not
incorporate power domain functionality.

Previously the clock properties were required for all compatible nodes.
Make that requirement only apply to the three existing CCUs (APBC, APMU,
and MPMU), so that the new reset-only CCUs can go without specifying them.

Define the index values for resets associated with all SpacemiT K1
syscon nodes, including those with clocks already defined, as well as
the new ones (without clocks).

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
v12: - Rename PCIe resets to align with their clock counterparts

 .../soc/spacemit/spacemit,k1-syscon.yaml      |  29 +++-
 .../dt-bindings/clock/spacemit,k1-syscon.h    | 141 ++++++++++++++++++
 2 files changed, 163 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
index 30aaf49da03d3..133a391ee68cd 100644
--- a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
+++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
@@ -19,6 +19,9 @@ properties:
       - spacemit,k1-syscon-apbc
       - spacemit,k1-syscon-apmu
       - spacemit,k1-syscon-mpmu
+      - spacemit,k1-syscon-rcpu
+      - spacemit,k1-syscon-rcpu2
+      - spacemit,k1-syscon-apbc2
 
   reg:
     maxItems: 1
@@ -47,9 +50,6 @@ properties:
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
-  - "#clock-cells"
   - "#reset-cells"
 
 allOf:
@@ -57,13 +57,28 @@ allOf:
       properties:
         compatible:
           contains:
-            const: spacemit,k1-syscon-apbc
+            enum:
+              - spacemit,k1-syscon-apmu
+              - spacemit,k1-syscon-mpmu
     then:
-      properties:
-        "#power-domain-cells": false
-    else:
       required:
         - "#power-domain-cells"
+    else:
+      properties:
+        "#power-domain-cells": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - spacemit,k1-syscon-apbc
+              - spacemit,k1-syscon-apmu
+              - spacemit,k1-syscon-mpmu
+    then:
+      required:
+        - clocks
+        - clock-names
+        - "#clock-cells"
 
 additionalProperties: false
 
diff --git a/include/dt-bindings/clock/spacemit,k1-syscon.h b/include/dt-bindings/clock/spacemit,k1-syscon.h
index 35968ae982466..2714c3fe66cd5 100644
--- a/include/dt-bindings/clock/spacemit,k1-syscon.h
+++ b/include/dt-bindings/clock/spacemit,k1-syscon.h
@@ -78,6 +78,9 @@
 #define CLK_APB			31
 #define CLK_WDT_BUS		32
 
+/* MPMU resets */
+#define RESET_WDT		0
+
 /* APBC clocks */
 #define CLK_UART0		0
 #define CLK_UART2		1
@@ -180,6 +183,59 @@
 #define CLK_TSEN_BUS		98
 #define CLK_IPC_AP2AUD_BUS	99
 
+/* APBC resets */
+#define RESET_UART0		0
+#define RESET_UART2		1
+#define RESET_UART3		2
+#define RESET_UART4		3
+#define RESET_UART5		4
+#define RESET_UART6		5
+#define RESET_UART7		6
+#define RESET_UART8		7
+#define RESET_UART9		8
+#define RESET_GPIO		9
+#define RESET_PWM0		10
+#define RESET_PWM1		11
+#define RESET_PWM2		12
+#define RESET_PWM3		13
+#define RESET_PWM4		14
+#define RESET_PWM5		15
+#define RESET_PWM6		16
+#define RESET_PWM7		17
+#define RESET_PWM8		18
+#define RESET_PWM9		19
+#define RESET_PWM10		20
+#define RESET_PWM11		21
+#define RESET_PWM12		22
+#define RESET_PWM13		23
+#define RESET_PWM14		24
+#define RESET_PWM15		25
+#define RESET_PWM16		26
+#define RESET_PWM17		27
+#define RESET_PWM18		28
+#define RESET_PWM19		29
+#define RESET_SSP3		30
+#define RESET_RTC		31
+#define RESET_TWSI0		32
+#define RESET_TWSI1		33
+#define RESET_TWSI2		34
+#define RESET_TWSI4		35
+#define RESET_TWSI5		36
+#define RESET_TWSI6		37
+#define RESET_TWSI7		38
+#define RESET_TWSI8		39
+#define RESET_TIMERS1		40
+#define RESET_TIMERS2		41
+#define RESET_AIB		42
+#define RESET_ONEWIRE		43
+#define RESET_SSPA0		44
+#define RESET_SSPA1		45
+#define RESET_DRO		46
+#define RESET_IR		47
+#define RESET_TSEN		48
+#define RESET_IPC_AP2AUD	49
+#define RESET_CAN0		50
+
 /* APMU clocks */
 #define CLK_CCI550		0
 #define CLK_CPU_C0_HI		1
@@ -244,4 +300,89 @@
 #define CLK_V2D			60
 #define CLK_EMMC_BUS		61
 
+/* APMU resets */
+#define RESET_CCIC_4X		0
+#define RESET_CCIC1_PHY		1
+#define RESET_SDH_AXI		2
+#define RESET_SDH0		3
+#define RESET_SDH1		4
+#define RESET_SDH2		5
+#define RESET_USBP1_AXI		6
+#define RESET_USB_AXI		7
+#define RESET_USB30_AHB		8
+#define RESET_USB30_VCC		9
+#define RESET_USB30_PHY		10
+#define RESET_QSPI		11
+#define RESET_QSPI_BUS		12
+#define RESET_DMA		13
+#define RESET_AES		14
+#define RESET_VPU		15
+#define RESET_GPU		16
+#define RESET_EMMC		17
+#define RESET_EMMC_X		18
+#define RESET_AUDIO_SYS		19
+#define RESET_AUDIO_MCU		20
+#define RESET_AUDIO_APMU	21
+#define RESET_HDMI		22
+#define RESET_PCIE0_MASTER	23
+#define RESET_PCIE0_SLAVE	24
+#define RESET_PCIE0_DBI		25
+#define RESET_PCIE0_GLOBAL	26
+#define RESET_PCIE1_MASTER	27
+#define RESET_PCIE1_SLAVE	28
+#define RESET_PCIE1_DBI		29
+#define RESET_PCIE1_GLOBAL	30
+#define RESET_PCIE2_MASTER	31
+#define RESET_PCIE2_SLAVE	32
+#define RESET_PCIE2_DBI		33
+#define RESET_PCIE2_GLOBAL	34
+#define RESET_EMAC0		35
+#define RESET_EMAC1		36
+#define RESET_JPG		37
+#define RESET_CCIC2PHY		38
+#define RESET_CCIC3PHY		39
+#define RESET_CSI		40
+#define RESET_ISP_CPP		41
+#define RESET_ISP_BUS		42
+#define RESET_ISP		43
+#define RESET_ISP_CI		44
+#define RESET_DPU_MCLK		45
+#define RESET_DPU_ESC		46
+#define RESET_DPU_HCLK		47
+#define RESET_DPU_SPIBUS	48
+#define RESET_DPU_SPI_HBUS	49
+#define RESET_V2D		50
+#define RESET_MIPI		51
+#define RESET_MC		52
+
+/*	RCPU resets	*/
+#define RESET_RCPU_SSP0		0
+#define RESET_RCPU_I2C0		1
+#define RESET_RCPU_UART1	2
+#define RESET_RCPU_IR		3
+#define RESET_RCPU_CAN		4
+#define RESET_RCPU_UART0	5
+#define RESET_RCPU_HDMI_AUDIO	6
+
+/*	RCPU2 resets	*/
+#define RESET_RCPU2_PWM0	0
+#define RESET_RCPU2_PWM1	1
+#define RESET_RCPU2_PWM2	2
+#define RESET_RCPU2_PWM3	3
+#define RESET_RCPU2_PWM4	4
+#define RESET_RCPU2_PWM5	5
+#define RESET_RCPU2_PWM6	6
+#define RESET_RCPU2_PWM7	7
+#define RESET_RCPU2_PWM8	8
+#define RESET_RCPU2_PWM9	9
+
+/*	APBC2 resets	*/
+#define RESET_APBC2_UART1	0
+#define RESET_APBC2_SSP2	1
+#define RESET_APBC2_TWSI3	2
+#define RESET_APBC2_RTC		3
+#define RESET_APBC2_TIMERS0	4
+#define RESET_APBC2_KPC		5
+#define RESET_APBC2_GPIO	6
+
 #endif /* _DT_BINDINGS_SPACEMIT_CCU_H_ */
-- 
2.45.2

[PATCH v12 2/6] soc: spacemit: create a header for clock/reset registers

[Alex Elder]

Move the definitions of register offsets and fields used by the SpacemiT
K1 SoC CCUs into a separate header file, so that they can be shared by
the reset driver that will be found under drivers/reset.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
 drivers/clk/spacemit/ccu-k1.c    | 111 +----------------------------
 include/soc/spacemit/k1-syscon.h | 118 +++++++++++++++++++++++++++++++
 2 files changed, 119 insertions(+), 110 deletions(-)
 create mode 100644 include/soc/spacemit/k1-syscon.h

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index cdde37a052353..801150f4ff0f5 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -11,6 +11,7 @@
 #include <linux/minmax.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <soc/spacemit/k1-syscon.h>
 
 #include "ccu_common.h"
 #include "ccu_pll.h"
@@ -19,116 +20,6 @@
 
 #include <dt-bindings/clock/spacemit,k1-syscon.h>
 
-/* APBS register offset */
-#define APBS_PLL1_SWCR1			0x100
-#define APBS_PLL1_SWCR2			0x104
-#define APBS_PLL1_SWCR3			0x108
-#define APBS_PLL2_SWCR1			0x118
-#define APBS_PLL2_SWCR2			0x11c
-#define APBS_PLL2_SWCR3			0x120
-#define APBS_PLL3_SWCR1			0x124
-#define APBS_PLL3_SWCR2			0x128
-#define APBS_PLL3_SWCR3			0x12c
-
-/* MPMU register offset */
-#define MPMU_POSR			0x0010
-#define  POSR_PLL1_LOCK			BIT(27)
-#define  POSR_PLL2_LOCK			BIT(28)
-#define  POSR_PLL3_LOCK			BIT(29)
-#define MPMU_SUCCR			0x0014
-#define MPMU_ISCCR			0x0044
-#define MPMU_WDTPCR			0x0200
-#define MPMU_RIPCCR			0x0210
-#define MPMU_ACGR			0x1024
-#define MPMU_APBCSCR			0x1050
-#define MPMU_SUCCR_1			0x10b0
-
-/* APBC register offset */
-#define APBC_UART1_CLK_RST		0x00
-#define APBC_UART2_CLK_RST		0x04
-#define APBC_GPIO_CLK_RST		0x08
-#define APBC_PWM0_CLK_RST		0x0c
-#define APBC_PWM1_CLK_RST		0x10
-#define APBC_PWM2_CLK_RST		0x14
-#define APBC_PWM3_CLK_RST		0x18
-#define APBC_TWSI8_CLK_RST		0x20
-#define APBC_UART3_CLK_RST		0x24
-#define APBC_RTC_CLK_RST		0x28
-#define APBC_TWSI0_CLK_RST		0x2c
-#define APBC_TWSI1_CLK_RST		0x30
-#define APBC_TIMERS1_CLK_RST		0x34
-#define APBC_TWSI2_CLK_RST		0x38
-#define APBC_AIB_CLK_RST		0x3c
-#define APBC_TWSI4_CLK_RST		0x40
-#define APBC_TIMERS2_CLK_RST		0x44
-#define APBC_ONEWIRE_CLK_RST		0x48
-#define APBC_TWSI5_CLK_RST		0x4c
-#define APBC_DRO_CLK_RST		0x58
-#define APBC_IR_CLK_RST			0x5c
-#define APBC_TWSI6_CLK_RST		0x60
-#define APBC_COUNTER_CLK_SEL		0x64
-#define APBC_TWSI7_CLK_RST		0x68
-#define APBC_TSEN_CLK_RST		0x6c
-#define APBC_UART4_CLK_RST		0x70
-#define APBC_UART5_CLK_RST		0x74
-#define APBC_UART6_CLK_RST		0x78
-#define APBC_SSP3_CLK_RST		0x7c
-#define APBC_SSPA0_CLK_RST		0x80
-#define APBC_SSPA1_CLK_RST		0x84
-#define APBC_IPC_AP2AUD_CLK_RST		0x90
-#define APBC_UART7_CLK_RST		0x94
-#define APBC_UART8_CLK_RST		0x98
-#define APBC_UART9_CLK_RST		0x9c
-#define APBC_CAN0_CLK_RST		0xa0
-#define APBC_PWM4_CLK_RST		0xa8
-#define APBC_PWM5_CLK_RST		0xac
-#define APBC_PWM6_CLK_RST		0xb0
-#define APBC_PWM7_CLK_RST		0xb4
-#define APBC_PWM8_CLK_RST		0xb8
-#define APBC_PWM9_CLK_RST		0xbc
-#define APBC_PWM10_CLK_RST		0xc0
-#define APBC_PWM11_CLK_RST		0xc4
-#define APBC_PWM12_CLK_RST		0xc8
-#define APBC_PWM13_CLK_RST		0xcc
-#define APBC_PWM14_CLK_RST		0xd0
-#define APBC_PWM15_CLK_RST		0xd4
-#define APBC_PWM16_CLK_RST		0xd8
-#define APBC_PWM17_CLK_RST		0xdc
-#define APBC_PWM18_CLK_RST		0xe0
-#define APBC_PWM19_CLK_RST		0xe4
-
-/* APMU register offset */
-#define APMU_JPG_CLK_RES_CTRL		0x020
-#define APMU_CSI_CCIC2_CLK_RES_CTRL	0x024
-#define APMU_ISP_CLK_RES_CTRL		0x038
-#define APMU_LCD_CLK_RES_CTRL1		0x044
-#define APMU_LCD_SPI_CLK_RES_CTRL	0x048
-#define APMU_LCD_CLK_RES_CTRL2		0x04c
-#define APMU_CCIC_CLK_RES_CTRL		0x050
-#define APMU_SDH0_CLK_RES_CTRL		0x054
-#define APMU_SDH1_CLK_RES_CTRL		0x058
-#define APMU_USB_CLK_RES_CTRL		0x05c
-#define APMU_QSPI_CLK_RES_CTRL		0x060
-#define APMU_DMA_CLK_RES_CTRL		0x064
-#define APMU_AES_CLK_RES_CTRL		0x068
-#define APMU_VPU_CLK_RES_CTRL		0x0a4
-#define APMU_GPU_CLK_RES_CTRL		0x0cc
-#define APMU_SDH2_CLK_RES_CTRL		0x0e0
-#define APMU_PMUA_MC_CTRL		0x0e8
-#define APMU_PMU_CC2_AP			0x100
-#define APMU_PMUA_EM_CLK_RES_CTRL	0x104
-#define APMU_AUDIO_CLK_RES_CTRL		0x14c
-#define APMU_HDMI_CLK_RES_CTRL		0x1b8
-#define APMU_CCI550_CLK_CTRL		0x300
-#define APMU_ACLK_CLK_CTRL		0x388
-#define APMU_CPU_C0_CLK_CTRL		0x38C
-#define APMU_CPU_C1_CLK_CTRL		0x390
-#define APMU_PCIE_CLK_RES_CTRL_0	0x3cc
-#define APMU_PCIE_CLK_RES_CTRL_1	0x3d4
-#define APMU_PCIE_CLK_RES_CTRL_2	0x3dc
-#define APMU_EMAC0_CLK_RES_CTRL		0x3e4
-#define APMU_EMAC1_CLK_RES_CTRL		0x3ec
-
 struct spacemit_ccu_data {
 	struct clk_hw **hws;
 	size_t num;
diff --git a/include/soc/spacemit/k1-syscon.h b/include/soc/spacemit/k1-syscon.h
new file mode 100644
index 0000000000000..039a448c51a07
--- /dev/null
+++ b/include/soc/spacemit/k1-syscon.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/* SpacemiT clock and reset driver definitions for the K1 SoC */
+
+#ifndef __SOC_K1_SYSCON_H__
+#define __SOC_K1_SYSCON_H__
+
+/* APBS register offset */
+#define APBS_PLL1_SWCR1			0x100
+#define APBS_PLL1_SWCR2			0x104
+#define APBS_PLL1_SWCR3			0x108
+#define APBS_PLL2_SWCR1			0x118
+#define APBS_PLL2_SWCR2			0x11c
+#define APBS_PLL2_SWCR3			0x120
+#define APBS_PLL3_SWCR1			0x124
+#define APBS_PLL3_SWCR2			0x128
+#define APBS_PLL3_SWCR3			0x12c
+
+/* MPMU register offset */
+#define MPMU_POSR			0x0010
+#define  POSR_PLL1_LOCK			BIT(27)
+#define  POSR_PLL2_LOCK			BIT(28)
+#define  POSR_PLL3_LOCK			BIT(29)
+#define MPMU_SUCCR			0x0014
+#define MPMU_ISCCR			0x0044
+#define MPMU_WDTPCR			0x0200
+#define MPMU_RIPCCR			0x0210
+#define MPMU_ACGR			0x1024
+#define MPMU_APBCSCR			0x1050
+#define MPMU_SUCCR_1			0x10b0
+
+/* APBC register offset */
+#define APBC_UART1_CLK_RST		0x00
+#define APBC_UART2_CLK_RST		0x04
+#define APBC_GPIO_CLK_RST		0x08
+#define APBC_PWM0_CLK_RST		0x0c
+#define APBC_PWM1_CLK_RST		0x10
+#define APBC_PWM2_CLK_RST		0x14
+#define APBC_PWM3_CLK_RST		0x18
+#define APBC_TWSI8_CLK_RST		0x20
+#define APBC_UART3_CLK_RST		0x24
+#define APBC_RTC_CLK_RST		0x28
+#define APBC_TWSI0_CLK_RST		0x2c
+#define APBC_TWSI1_CLK_RST		0x30
+#define APBC_TIMERS1_CLK_RST		0x34
+#define APBC_TWSI2_CLK_RST		0x38
+#define APBC_AIB_CLK_RST		0x3c
+#define APBC_TWSI4_CLK_RST		0x40
+#define APBC_TIMERS2_CLK_RST		0x44
+#define APBC_ONEWIRE_CLK_RST		0x48
+#define APBC_TWSI5_CLK_RST		0x4c
+#define APBC_DRO_CLK_RST		0x58
+#define APBC_IR_CLK_RST			0x5c
+#define APBC_TWSI6_CLK_RST		0x60
+#define APBC_COUNTER_CLK_SEL		0x64
+#define APBC_TWSI7_CLK_RST		0x68
+#define APBC_TSEN_CLK_RST		0x6c
+#define APBC_UART4_CLK_RST		0x70
+#define APBC_UART5_CLK_RST		0x74
+#define APBC_UART6_CLK_RST		0x78
+#define APBC_SSP3_CLK_RST		0x7c
+#define APBC_SSPA0_CLK_RST		0x80
+#define APBC_SSPA1_CLK_RST		0x84
+#define APBC_IPC_AP2AUD_CLK_RST		0x90
+#define APBC_UART7_CLK_RST		0x94
+#define APBC_UART8_CLK_RST		0x98
+#define APBC_UART9_CLK_RST		0x9c
+#define APBC_CAN0_CLK_RST		0xa0
+#define APBC_PWM4_CLK_RST		0xa8
+#define APBC_PWM5_CLK_RST		0xac
+#define APBC_PWM6_CLK_RST		0xb0
+#define APBC_PWM7_CLK_RST		0xb4
+#define APBC_PWM8_CLK_RST		0xb8
+#define APBC_PWM9_CLK_RST		0xbc
+#define APBC_PWM10_CLK_RST		0xc0
+#define APBC_PWM11_CLK_RST		0xc4
+#define APBC_PWM12_CLK_RST		0xc8
+#define APBC_PWM13_CLK_RST		0xcc
+#define APBC_PWM14_CLK_RST		0xd0
+#define APBC_PWM15_CLK_RST		0xd4
+#define APBC_PWM16_CLK_RST		0xd8
+#define APBC_PWM17_CLK_RST		0xdc
+#define APBC_PWM18_CLK_RST		0xe0
+#define APBC_PWM19_CLK_RST		0xe4
+
+/* APMU register offset */
+#define APMU_JPG_CLK_RES_CTRL		0x020
+#define APMU_CSI_CCIC2_CLK_RES_CTRL	0x024
+#define APMU_ISP_CLK_RES_CTRL		0x038
+#define APMU_LCD_CLK_RES_CTRL1		0x044
+#define APMU_LCD_SPI_CLK_RES_CTRL	0x048
+#define APMU_LCD_CLK_RES_CTRL2		0x04c
+#define APMU_CCIC_CLK_RES_CTRL		0x050
+#define APMU_SDH0_CLK_RES_CTRL		0x054
+#define APMU_SDH1_CLK_RES_CTRL		0x058
+#define APMU_USB_CLK_RES_CTRL		0x05c
+#define APMU_QSPI_CLK_RES_CTRL		0x060
+#define APMU_DMA_CLK_RES_CTRL		0x064
+#define APMU_AES_CLK_RES_CTRL		0x068
+#define APMU_VPU_CLK_RES_CTRL		0x0a4
+#define APMU_GPU_CLK_RES_CTRL		0x0cc
+#define APMU_SDH2_CLK_RES_CTRL		0x0e0
+#define APMU_PMUA_MC_CTRL		0x0e8
+#define APMU_PMU_CC2_AP			0x100
+#define APMU_PMUA_EM_CLK_RES_CTRL	0x104
+#define APMU_AUDIO_CLK_RES_CTRL		0x14c
+#define APMU_HDMI_CLK_RES_CTRL		0x1b8
+#define APMU_CCI550_CLK_CTRL		0x300
+#define APMU_ACLK_CLK_CTRL		0x388
+#define APMU_CPU_C0_CLK_CTRL		0x38C
+#define APMU_CPU_C1_CLK_CTRL		0x390
+#define APMU_PCIE_CLK_RES_CTRL_0	0x3cc
+#define APMU_PCIE_CLK_RES_CTRL_1	0x3d4
+#define APMU_PCIE_CLK_RES_CTRL_2	0x3dc
+#define APMU_EMAC0_CLK_RES_CTRL		0x3e4
+#define APMU_EMAC1_CLK_RES_CTRL		0x3ec
+
+#endif /* __SOC_K1_SYSCON_H__ */
-- 
2.45.2

[PATCH v12 3/6] clk: spacemit: set up reset auxiliary devices

[Alex Elder]

Add a new reset_name field to the spacemit_ccu_data structure.  If it is
non-null, the CCU implements a reset controller, and the name will be
used in the name for the auxiliary device that implements it.

Define a new type to hold an auxiliary device as well as the regmap
pointer that will be needed by CCU reset controllers.  Set up code to
initialize and add an auxiliary device for any CCU that implements reset
functionality.

Make it optional for a CCU to implement a clock controller.  This
doesn't apply to any of the existing CCUs but will for some new ones
that will be added soon.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
 drivers/clk/spacemit/Kconfig     |   1 +
 drivers/clk/spacemit/ccu-k1.c    | 104 ++++++++++++++++++++++++++++---
 include/soc/spacemit/k1-syscon.h |  12 ++++
 3 files changed, 107 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/spacemit/Kconfig b/drivers/clk/spacemit/Kconfig
index 4c4df845b3cb2..3854f6ae6d0ea 100644
--- a/drivers/clk/spacemit/Kconfig
+++ b/drivers/clk/spacemit/Kconfig
@@ -3,6 +3,7 @@
 config SPACEMIT_CCU
 	tristate "Clock support for SpacemiT SoCs"
 	depends on ARCH_SPACEMIT || COMPILE_TEST
+	select AUXILIARY_BUS
 	select MFD_SYSCON
 	help
 	  Say Y to enable clock controller unit support for SpacemiT SoCs.
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 801150f4ff0f5..1c9ed434ae93e 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -5,12 +5,15 @@
  */
 
 #include <linux/array_size.h>
+#include <linux/auxiliary_bus.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
+#include <linux/idr.h>
 #include <linux/mfd/syscon.h>
 #include <linux/minmax.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <soc/spacemit/k1-syscon.h>
 
 #include "ccu_common.h"
@@ -21,10 +24,13 @@
 #include <dt-bindings/clock/spacemit,k1-syscon.h>
 
 struct spacemit_ccu_data {
+	const char *reset_name;
 	struct clk_hw **hws;
 	size_t num;
 };
 
+static DEFINE_IDA(auxiliary_ids);
+
 /* APBS clocks start, APBS region contains and only contains all PLL clocks */
 
 /*
@@ -710,8 +716,9 @@ static struct clk_hw *k1_ccu_pll_hws[] = {
 };
 
 static const struct spacemit_ccu_data k1_ccu_pll_data = {
-	.hws	= k1_ccu_pll_hws,
-	.num	= ARRAY_SIZE(k1_ccu_pll_hws),
+	/* The PLL CCU implements no resets */
+	.hws		= k1_ccu_pll_hws,
+	.num		= ARRAY_SIZE(k1_ccu_pll_hws),
 };
 
 static struct clk_hw *k1_ccu_mpmu_hws[] = {
@@ -751,8 +758,9 @@ static struct clk_hw *k1_ccu_mpmu_hws[] = {
 };
 
 static const struct spacemit_ccu_data k1_ccu_mpmu_data = {
-	.hws	= k1_ccu_mpmu_hws,
-	.num	= ARRAY_SIZE(k1_ccu_mpmu_hws),
+	.reset_name	= "mpmu-reset",
+	.hws		= k1_ccu_mpmu_hws,
+	.num		= ARRAY_SIZE(k1_ccu_mpmu_hws),
 };
 
 static struct clk_hw *k1_ccu_apbc_hws[] = {
@@ -859,8 +867,9 @@ static struct clk_hw *k1_ccu_apbc_hws[] = {
 };
 
 static const struct spacemit_ccu_data k1_ccu_apbc_data = {
-	.hws	= k1_ccu_apbc_hws,
-	.num	= ARRAY_SIZE(k1_ccu_apbc_hws),
+	.reset_name	= "apbc-reset",
+	.hws		= k1_ccu_apbc_hws,
+	.num		= ARRAY_SIZE(k1_ccu_apbc_hws),
 };
 
 static struct clk_hw *k1_ccu_apmu_hws[] = {
@@ -929,8 +938,9 @@ static struct clk_hw *k1_ccu_apmu_hws[] = {
 };
 
 static const struct spacemit_ccu_data k1_ccu_apmu_data = {
-	.hws	= k1_ccu_apmu_hws,
-	.num	= ARRAY_SIZE(k1_ccu_apmu_hws),
+	.reset_name	= "apmu-reset",
+	.hws		= k1_ccu_apmu_hws,
+	.num		= ARRAY_SIZE(k1_ccu_apmu_hws),
 };
 
 static int spacemit_ccu_register(struct device *dev,
@@ -941,6 +951,10 @@ static int spacemit_ccu_register(struct device *dev,
 	struct clk_hw_onecell_data *clk_data;
 	int i, ret;
 
+	/* Nothing to do if the CCU does not implement any clocks */
+	if (!data->hws)
+		return 0;
+
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, data->num),
 				GFP_KERNEL);
 	if (!clk_data)
@@ -981,9 +995,74 @@ static int spacemit_ccu_register(struct device *dev,
 	return ret;
 }
 
+static void spacemit_cadev_release(struct device *dev)
+{
+	struct auxiliary_device *adev = to_auxiliary_dev(dev);
+
+	ida_free(&auxiliary_ids, adev->id);
+	kfree(to_spacemit_ccu_adev(adev));
+}
+
+static void spacemit_adev_unregister(void *data)
+{
+	struct auxiliary_device *adev = data;
+
+	auxiliary_device_delete(adev);
+	auxiliary_device_uninit(adev);
+}
+
+static int spacemit_ccu_reset_register(struct device *dev,
+				       struct regmap *regmap,
+				       const char *reset_name)
+{
+	struct spacemit_ccu_adev *cadev;
+	struct auxiliary_device *adev;
+	int ret;
+
+	/* Nothing to do if the CCU does not implement a reset controller */
+	if (!reset_name)
+		return 0;
+
+	cadev = kzalloc(sizeof(*cadev), GFP_KERNEL);
+	if (!cadev)
+		return -ENOMEM;
+
+	cadev->regmap = regmap;
+
+	adev = &cadev->adev;
+	adev->name = reset_name;
+	adev->dev.parent = dev;
+	adev->dev.release = spacemit_cadev_release;
+	adev->dev.of_node = dev->of_node;
+	ret = ida_alloc(&auxiliary_ids, GFP_KERNEL);
+	if (ret < 0)
+		goto err_free_cadev;
+	adev->id = ret;
+
+	ret = auxiliary_device_init(adev);
+	if (ret)
+		goto err_free_aux_id;
+
+	ret = auxiliary_device_add(adev);
+	if (ret) {
+		auxiliary_device_uninit(adev);
+		return ret;
+	}
+
+	return devm_add_action_or_reset(dev, spacemit_adev_unregister, adev);
+
+err_free_aux_id:
+	ida_free(&auxiliary_ids, adev->id);
+err_free_cadev:
+	kfree(cadev);
+
+	return ret;
+}
+
 static int k1_ccu_probe(struct platform_device *pdev)
 {
 	struct regmap *base_regmap, *lock_regmap = NULL;
+	const struct spacemit_ccu_data *data;
 	struct device *dev = &pdev->dev;
 	int ret;
 
@@ -1012,11 +1091,16 @@ static int k1_ccu_probe(struct platform_device *pdev)
 					     "failed to get lock regmap\n");
 	}
 
-	ret = spacemit_ccu_register(dev, base_regmap, lock_regmap,
-				    of_device_get_match_data(dev));
+	data = of_device_get_match_data(dev);
+
+	ret = spacemit_ccu_register(dev, base_regmap, lock_regmap, data);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to register clocks\n");
 
+	ret = spacemit_ccu_reset_register(dev, base_regmap, data->reset_name);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register resets\n");
+
 	return 0;
 }
 
diff --git a/include/soc/spacemit/k1-syscon.h b/include/soc/spacemit/k1-syscon.h
index 039a448c51a07..53eff7691f33d 100644
--- a/include/soc/spacemit/k1-syscon.h
+++ b/include/soc/spacemit/k1-syscon.h
@@ -5,6 +5,18 @@
 #ifndef __SOC_K1_SYSCON_H__
 #define __SOC_K1_SYSCON_H__
 
+/* Auxiliary device used to represent a CCU reset controller */
+struct spacemit_ccu_adev {
+	struct auxiliary_device adev;
+	struct regmap *regmap;
+};
+
+static inline struct spacemit_ccu_adev *
+to_spacemit_ccu_adev(struct auxiliary_device *adev)
+{
+	return container_of(adev, struct spacemit_ccu_adev, adev);
+}
+
 /* APBS register offset */
 #define APBS_PLL1_SWCR1			0x100
 #define APBS_PLL1_SWCR2			0x104
-- 
2.45.2

[PATCH v12 4/6] clk: spacemit: define three reset-only CCUs

[Alex Elder]

Three CCUs on the SpacemiT K1 SoC implement only resets, not clocks.
Define the CCU data for these resets so their auxiliary devices get
created.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
 drivers/clk/spacemit/ccu-k1.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 1c9ed434ae93e..f9e2200d1fd04 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -943,6 +943,18 @@ static const struct spacemit_ccu_data k1_ccu_apmu_data = {
 	.num		= ARRAY_SIZE(k1_ccu_apmu_hws),
 };
 
+static const struct spacemit_ccu_data k1_ccu_rcpu_data = {
+	.reset_name	= "rcpu-reset",
+};
+
+static const struct spacemit_ccu_data k1_ccu_rcpu2_data = {
+	.reset_name	= "rcpu2-reset",
+};
+
+static const struct spacemit_ccu_data k1_ccu_apbc2_data = {
+	.reset_name	= "apbc2-reset",
+};
+
 static int spacemit_ccu_register(struct device *dev,
 				 struct regmap *regmap,
 				 struct regmap *lock_regmap,
@@ -1121,6 +1133,18 @@ static const struct of_device_id of_k1_ccu_match[] = {
 		.compatible	= "spacemit,k1-syscon-apmu",
 		.data		= &k1_ccu_apmu_data,
 	},
+	{
+		.compatible	= "spacemit,k1-syscon-rcpu",
+		.data		= &k1_ccu_rcpu_data,
+	},
+	{
+		.compatible	= "spacemit,k1-syscon-rcpu2",
+		.data		= &k1_ccu_rcpu2_data,
+	},
+	{
+		.compatible	= "spacemit,k1-syscon-apbc2",
+		.data		= &k1_ccu_apbc2_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, of_k1_ccu_match);
-- 
2.45.2

[PATCH v12 5/6] reset: spacemit: add support for SpacemiT CCU resets

[Alex Elder]

Implement reset support for SpacemiT CCUs.  A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).

This patch defines the reset controllers for the MPMU, APBC, and MPMU
CCUs, which already define clock controllers.  It also adds RCPU, RCPU2,
and ACPB2 CCUs, which only define resets.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
v12: - Rename PCIe resets to align with their clock counterparts

 drivers/reset/Kconfig            |   9 +
 drivers/reset/Makefile           |   1 +
 drivers/reset/reset-spacemit.c   | 304 +++++++++++++++++++++++++++++++
 include/soc/spacemit/k1-syscon.h |  30 +++
 4 files changed, 344 insertions(+)
 create mode 100644 drivers/reset/reset-spacemit.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index ba4bb07309a1d..635eef469ab79 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -279,6 +279,15 @@ config RESET_SOCFPGA
 	  This enables the reset driver for the SoCFPGA ARMv7 platforms. This
 	  driver gets initialized early during platform init calls.
 
+config RESET_SPACEMIT
+	tristate "SpacemiT reset driver"
+	depends on ARCH_SPACEMIT || COMPILE_TEST
+	select AUXILIARY_BUS
+	default ARCH_SPACEMIT
+	help
+	  This enables the reset controller driver for SpacemiT SoCs,
+	  including the K1.
+
 config RESET_SUNPLUS
 	bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
 	default ARCH_SUNPLUS
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 82488dac0f35e..a917d2522e8d1 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
+obj-$(CONFIG_RESET_SPACEMIT) += reset-spacemit.o
 obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TH1520) += reset-th1520.o
diff --git a/drivers/reset/reset-spacemit.c b/drivers/reset/reset-spacemit.c
new file mode 100644
index 0000000000000..e1272aff28f74
--- /dev/null
+++ b/drivers/reset/reset-spacemit.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* SpacemiT reset controller driver */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/types.h>
+
+#include <soc/spacemit/k1-syscon.h>
+#include <dt-bindings/clock/spacemit,k1-syscon.h>
+
+struct ccu_reset_data {
+	u32 offset;
+	u32 assert_mask;
+	u32 deassert_mask;
+};
+
+struct ccu_reset_controller_data {
+	const struct ccu_reset_data *reset_data;	/* array */
+	size_t count;
+};
+
+struct ccu_reset_controller {
+	struct reset_controller_dev rcdev;
+	const struct ccu_reset_controller_data *data;
+	struct regmap *regmap;
+};
+
+#define RESET_DATA(_offset, _assert_mask, _deassert_mask)	\
+	{							\
+		.offset		= (_offset),			\
+		.assert_mask	= (_assert_mask),		\
+		.deassert_mask	= (_deassert_mask),		\
+	}
+
+static const struct ccu_reset_data k1_mpmu_resets[] = {
+	[RESET_WDT]	= RESET_DATA(MPMU_WDTPCR,		BIT(2), 0),
+};
+
+static const struct ccu_reset_controller_data k1_mpmu_reset_data = {
+	.reset_data	= k1_mpmu_resets,
+	.count		= ARRAY_SIZE(k1_mpmu_resets),
+};
+
+static const struct ccu_reset_data k1_apbc_resets[] = {
+	[RESET_UART0]	= RESET_DATA(APBC_UART1_CLK_RST,	BIT(2),	0),
+	[RESET_UART2]	= RESET_DATA(APBC_UART2_CLK_RST,	BIT(2), 0),
+	[RESET_GPIO]	= RESET_DATA(APBC_GPIO_CLK_RST,		BIT(2), 0),
+	[RESET_PWM0]	= RESET_DATA(APBC_PWM0_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM1]	= RESET_DATA(APBC_PWM1_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM2]	= RESET_DATA(APBC_PWM2_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM3]	= RESET_DATA(APBC_PWM3_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM4]	= RESET_DATA(APBC_PWM4_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM5]	= RESET_DATA(APBC_PWM5_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM6]	= RESET_DATA(APBC_PWM6_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM7]	= RESET_DATA(APBC_PWM7_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM8]	= RESET_DATA(APBC_PWM8_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM9]	= RESET_DATA(APBC_PWM9_CLK_RST,		BIT(2), BIT(0)),
+	[RESET_PWM10]	= RESET_DATA(APBC_PWM10_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM11]	= RESET_DATA(APBC_PWM11_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM12]	= RESET_DATA(APBC_PWM12_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM13]	= RESET_DATA(APBC_PWM13_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM14]	= RESET_DATA(APBC_PWM14_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM15]	= RESET_DATA(APBC_PWM15_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM16]	= RESET_DATA(APBC_PWM16_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM17]	= RESET_DATA(APBC_PWM17_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM18]	= RESET_DATA(APBC_PWM18_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_PWM19]	= RESET_DATA(APBC_PWM19_CLK_RST,	BIT(2), BIT(0)),
+	[RESET_SSP3]	= RESET_DATA(APBC_SSP3_CLK_RST,		BIT(2), 0),
+	[RESET_UART3]	= RESET_DATA(APBC_UART3_CLK_RST,	BIT(2), 0),
+	[RESET_RTC]	= RESET_DATA(APBC_RTC_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI0]	= RESET_DATA(APBC_TWSI0_CLK_RST,	BIT(2), 0),
+	[RESET_TIMERS1]	= RESET_DATA(APBC_TIMERS1_CLK_RST,	BIT(2), 0),
+	[RESET_AIB]	= RESET_DATA(APBC_AIB_CLK_RST,		BIT(2), 0),
+	[RESET_TIMERS2]	= RESET_DATA(APBC_TIMERS2_CLK_RST,	BIT(2), 0),
+	[RESET_ONEWIRE]	= RESET_DATA(APBC_ONEWIRE_CLK_RST,	BIT(2), 0),
+	[RESET_SSPA0]	= RESET_DATA(APBC_SSPA0_CLK_RST,	BIT(2), 0),
+	[RESET_SSPA1]	= RESET_DATA(APBC_SSPA1_CLK_RST,	BIT(2), 0),
+	[RESET_DRO]	= RESET_DATA(APBC_DRO_CLK_RST,		BIT(2), 0),
+	[RESET_IR]	= RESET_DATA(APBC_IR_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI1]	= RESET_DATA(APBC_TWSI1_CLK_RST,	BIT(2), 0),
+	[RESET_TSEN]	= RESET_DATA(APBC_TSEN_CLK_RST,		BIT(2), 0),
+	[RESET_TWSI2]	= RESET_DATA(APBC_TWSI2_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI4]	= RESET_DATA(APBC_TWSI4_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI5]	= RESET_DATA(APBC_TWSI5_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI6]	= RESET_DATA(APBC_TWSI6_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI7]	= RESET_DATA(APBC_TWSI7_CLK_RST,	BIT(2), 0),
+	[RESET_TWSI8]	= RESET_DATA(APBC_TWSI8_CLK_RST,	BIT(2), 0),
+	[RESET_IPC_AP2AUD] = RESET_DATA(APBC_IPC_AP2AUD_CLK_RST, BIT(2), 0),
+	[RESET_UART4]	= RESET_DATA(APBC_UART4_CLK_RST,	BIT(2), 0),
+	[RESET_UART5]	= RESET_DATA(APBC_UART5_CLK_RST,	BIT(2), 0),
+	[RESET_UART6]	= RESET_DATA(APBC_UART6_CLK_RST,	BIT(2), 0),
+	[RESET_UART7]	= RESET_DATA(APBC_UART7_CLK_RST,	BIT(2), 0),
+	[RESET_UART8]	= RESET_DATA(APBC_UART8_CLK_RST,	BIT(2), 0),
+	[RESET_UART9]	= RESET_DATA(APBC_UART9_CLK_RST,	BIT(2), 0),
+	[RESET_CAN0]	= RESET_DATA(APBC_CAN0_CLK_RST,		BIT(2), 0),
+};
+
+static const struct ccu_reset_controller_data k1_apbc_reset_data = {
+	.reset_data	= k1_apbc_resets,
+	.count		= ARRAY_SIZE(k1_apbc_resets),
+};
+
+static const struct ccu_reset_data k1_apmu_resets[] = {
+	[RESET_CCIC_4X]	= RESET_DATA(APMU_CCIC_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_CCIC1_PHY] = RESET_DATA(APMU_CCIC_CLK_RES_CTRL,	0, BIT(2)),
+	[RESET_SDH_AXI]	= RESET_DATA(APMU_SDH0_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_SDH0]	= RESET_DATA(APMU_SDH0_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_SDH1]	= RESET_DATA(APMU_SDH1_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_SDH2]	= RESET_DATA(APMU_SDH2_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_USBP1_AXI] = RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(4)),
+	[RESET_USB_AXI]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_USB30_AHB] = RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(9)),
+	[RESET_USB30_VCC] = RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(10)),
+	[RESET_USB30_PHY] = RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(11)),
+	[RESET_QSPI]	= RESET_DATA(APMU_QSPI_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_QSPI_BUS] = RESET_DATA(APMU_QSPI_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_DMA]	= RESET_DATA(APMU_DMA_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_AES]	= RESET_DATA(APMU_AES_CLK_RES_CTRL,	0, BIT(4)),
+	[RESET_VPU]	= RESET_DATA(APMU_VPU_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_GPU]	= RESET_DATA(APMU_GPU_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMMC]	= RESET_DATA(APMU_PMUA_EM_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMMC_X]	= RESET_DATA(APMU_PMUA_EM_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_AUDIO_SYS] = RESET_DATA(APMU_AUDIO_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_AUDIO_MCU] = RESET_DATA(APMU_AUDIO_CLK_RES_CTRL, 0, BIT(2)),
+	[RESET_AUDIO_APMU] = RESET_DATA(APMU_AUDIO_CLK_RES_CTRL, 0, BIT(3)),
+	[RESET_HDMI]	= RESET_DATA(APMU_HDMI_CLK_RES_CTRL,	0, BIT(9)),
+	[RESET_PCIE0_DBI] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_0, 0, BIT(3)),
+	[RESET_PCIE0_SLAVE] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_0, 0, BIT(4)),
+	[RESET_PCIE0_MASTER] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_0, 0, BIT(5)),
+	[RESET_PCIE0_GLOBAL] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_0, BIT(8), 0),
+	[RESET_PCIE1_DBI] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_1, 0, BIT(3)),
+	[RESET_PCIE1_SLAVE] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_1, 0, BIT(4)),
+	[RESET_PCIE1_MASTER] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_1, 0, BIT(5)),
+	[RESET_PCIE1_GLOBAL] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_1, BIT(8), 0),
+	[RESET_PCIE2_DBI] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_2, 0, BIT(3)),
+	[RESET_PCIE2_SLAVE] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_2, 0, BIT(4)),
+	[RESET_PCIE2_MASTER] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_2, 0, BIT(5)),
+	[RESET_PCIE2_GLOBAL] = RESET_DATA(APMU_PCIE_CLK_RES_CTRL_2, BIT(8), 0),
+	[RESET_EMAC0]	= RESET_DATA(APMU_EMAC0_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_EMAC1]	= RESET_DATA(APMU_EMAC1_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_JPG]	= RESET_DATA(APMU_JPG_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_CCIC2PHY] = RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(2)),
+	[RESET_CCIC3PHY] = RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(29)),
+	[RESET_CSI]	= RESET_DATA(APMU_CSI_CCIC2_CLK_RES_CTRL, 0, BIT(1)),
+	[RESET_ISP]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(0)),
+	[RESET_ISP_CPP]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(27)),
+	[RESET_ISP_BUS]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(3)),
+	[RESET_ISP_CI]	= RESET_DATA(APMU_ISP_CLK_RES_CTRL,	0, BIT(16)),
+	[RESET_DPU_MCLK] = RESET_DATA(APMU_LCD_CLK_RES_CTRL2,	0, BIT(9)),
+	[RESET_DPU_ESC]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(3)),
+	[RESET_DPU_HCLK] = RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(4)),
+	[RESET_DPU_SPIBUS] = RESET_DATA(APMU_LCD_SPI_CLK_RES_CTRL, 0, BIT(4)),
+	[RESET_DPU_SPI_HBUS] = RESET_DATA(APMU_LCD_SPI_CLK_RES_CTRL, 0, BIT(2)),
+	[RESET_V2D]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(27)),
+	[RESET_MIPI]	= RESET_DATA(APMU_LCD_CLK_RES_CTRL1,	0, BIT(15)),
+	[RESET_MC]	= RESET_DATA(APMU_PMUA_MC_CTRL,		0, BIT(0)),
+};
+
+static const struct ccu_reset_controller_data k1_apmu_reset_data = {
+	.reset_data	= k1_apmu_resets,
+	.count		= ARRAY_SIZE(k1_apmu_resets),
+};
+
+static const struct ccu_reset_data k1_rcpu_resets[] = {
+	[RESET_RCPU_SSP0]	= RESET_DATA(RCPU_SSP0_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_I2C0]	= RESET_DATA(RCPU_I2C0_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_UART1]	= RESET_DATA(RCPU_UART1_CLK_RST, 0, BIT(0)),
+	[RESET_RCPU_IR]		= RESET_DATA(RCPU_CAN_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_CAN]	= RESET_DATA(RCPU_IR_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_UART0]	= RESET_DATA(RCPU_UART0_CLK_RST, 0, BIT(0)),
+	[RESET_RCPU_HDMI_AUDIO]	= RESET_DATA(AUDIO_HDMI_CLK_CTRL, 0, BIT(0)),
+};
+
+static const struct ccu_reset_controller_data k1_rcpu_reset_data = {
+	.reset_data	= k1_rcpu_resets,
+	.count		= ARRAY_SIZE(k1_rcpu_resets),
+};
+
+static const struct ccu_reset_data k1_rcpu2_resets[] = {
+	[RESET_RCPU2_PWM0]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM1]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM2]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM3]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM4]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM5]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM6]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM7]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM8]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM9]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+};
+
+static const struct ccu_reset_controller_data k1_rcpu2_reset_data = {
+	.reset_data	= k1_rcpu2_resets,
+	.count		= ARRAY_SIZE(k1_rcpu2_resets),
+};
+
+static const struct ccu_reset_data k1_apbc2_resets[] = {
+	[RESET_APBC2_UART1]	= RESET_DATA(APBC2_UART1_CLK_RST, BIT(2), 0),
+	[RESET_APBC2_SSP2]	= RESET_DATA(APBC2_SSP2_CLK_RST, BIT(2), 0),
+	[RESET_APBC2_TWSI3]	= RESET_DATA(APBC2_TWSI3_CLK_RST, BIT(2), 0),
+	[RESET_APBC2_RTC]	= RESET_DATA(APBC2_RTC_CLK_RST,	BIT(2), 0),
+	[RESET_APBC2_TIMERS0]	= RESET_DATA(APBC2_TIMERS0_CLK_RST, BIT(2), 0),
+	[RESET_APBC2_KPC]	= RESET_DATA(APBC2_KPC_CLK_RST,	BIT(2), 0),
+	[RESET_APBC2_GPIO]	= RESET_DATA(APBC2_GPIO_CLK_RST, BIT(2), 0),
+};
+
+static const struct ccu_reset_controller_data k1_apbc2_reset_data = {
+	.reset_data	= k1_apbc2_resets,
+	.count		= ARRAY_SIZE(k1_apbc2_resets),
+};
+
+static int spacemit_reset_update(struct reset_controller_dev *rcdev,
+				 unsigned long id, bool assert)
+{
+	struct ccu_reset_controller *controller;
+	const struct ccu_reset_data *data;
+	u32 mask;
+	u32 val;
+
+	controller = container_of(rcdev, struct ccu_reset_controller, rcdev);
+	data = &controller->data->reset_data[id];
+	mask = data->assert_mask | data->deassert_mask;
+	val = assert ? data->assert_mask : data->deassert_mask;
+
+	return regmap_update_bits(controller->regmap, data->offset, mask, val);
+}
+
+static int spacemit_reset_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return spacemit_reset_update(rcdev, id, true);
+}
+
+static int spacemit_reset_deassert(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	return spacemit_reset_update(rcdev, id, false);
+}
+
+static const struct reset_control_ops spacemit_reset_control_ops = {
+	.assert		= spacemit_reset_assert,
+	.deassert	= spacemit_reset_deassert,
+};
+
+static int spacemit_reset_controller_register(struct device *dev,
+					      struct ccu_reset_controller *controller)
+{
+	struct reset_controller_dev *rcdev = &controller->rcdev;
+
+	rcdev->ops = &spacemit_reset_control_ops;
+	rcdev->owner = THIS_MODULE;
+	rcdev->of_node = dev->of_node;
+	rcdev->nr_resets = controller->data->count;
+
+	return devm_reset_controller_register(dev, &controller->rcdev);
+}
+
+static int spacemit_reset_probe(struct auxiliary_device *adev,
+				const struct auxiliary_device_id *id)
+{
+	struct spacemit_ccu_adev *rdev = to_spacemit_ccu_adev(adev);
+	struct ccu_reset_controller *controller;
+	struct device *dev = &adev->dev;
+
+	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+	controller->data = (const struct ccu_reset_controller_data *)id->driver_data;
+	controller->regmap = rdev->regmap;
+
+	return spacemit_reset_controller_register(dev, controller);
+}
+
+#define K1_AUX_DEV_ID(_unit) \
+	{ \
+		.name = "spacemit_ccu_k1." #_unit "-reset", \
+		.driver_data = (kernel_ulong_t)&k1_ ## _unit ## _reset_data, \
+	}
+
+static const struct auxiliary_device_id spacemit_reset_ids[] = {
+	K1_AUX_DEV_ID(mpmu),
+	K1_AUX_DEV_ID(apbc),
+	K1_AUX_DEV_ID(apmu),
+	K1_AUX_DEV_ID(rcpu),
+	K1_AUX_DEV_ID(rcpu2),
+	K1_AUX_DEV_ID(apbc2),
+	{ },
+};
+MODULE_DEVICE_TABLE(auxiliary, spacemit_reset_ids);
+
+static struct auxiliary_driver spacemit_k1_reset_driver = {
+	.probe          = spacemit_reset_probe,
+	.id_table       = spacemit_reset_ids,
+};
+module_auxiliary_driver(spacemit_k1_reset_driver);
+
+MODULE_AUTHOR("Alex Elder <elder@kernel.org>");
+MODULE_DESCRIPTION("SpacemiT reset controller driver");
+MODULE_LICENSE("GPL");
diff --git a/include/soc/spacemit/k1-syscon.h b/include/soc/spacemit/k1-syscon.h
index 53eff7691f33d..c59bd7a38e5b4 100644
--- a/include/soc/spacemit/k1-syscon.h
+++ b/include/soc/spacemit/k1-syscon.h
@@ -127,4 +127,34 @@ to_spacemit_ccu_adev(struct auxiliary_device *adev)
 #define APMU_EMAC0_CLK_RES_CTRL		0x3e4
 #define APMU_EMAC1_CLK_RES_CTRL		0x3ec
 
+/* RCPU register offsets */
+#define RCPU_SSP0_CLK_RST		0x0028
+#define RCPU_I2C0_CLK_RST		0x0030
+#define RCPU_UART1_CLK_RST		0x003c
+#define RCPU_CAN_CLK_RST		0x0048
+#define RCPU_IR_CLK_RST			0x004c
+#define RCPU_UART0_CLK_RST		0x00d8
+#define AUDIO_HDMI_CLK_CTRL		0x2044
+
+/* RCPU2 register offsets */
+#define RCPU2_PWM0_CLK_RST		0x0000
+#define RCPU2_PWM1_CLK_RST		0x0004
+#define RCPU2_PWM2_CLK_RST		0x0008
+#define RCPU2_PWM3_CLK_RST		0x000c
+#define RCPU2_PWM4_CLK_RST		0x0010
+#define RCPU2_PWM5_CLK_RST		0x0014
+#define RCPU2_PWM6_CLK_RST		0x0018
+#define RCPU2_PWM7_CLK_RST		0x001c
+#define RCPU2_PWM8_CLK_RST		0x0020
+#define RCPU2_PWM9_CLK_RST		0x0024
+
+/* APBC2 register offsets */
+#define APBC2_UART1_CLK_RST		0x0000
+#define APBC2_SSP2_CLK_RST		0x0004
+#define APBC2_TWSI3_CLK_RST		0x0008
+#define APBC2_RTC_CLK_RST		0x000c
+#define APBC2_TIMERS0_CLK_RST		0x0010
+#define APBC2_KPC_CLK_RST		0x0014
+#define APBC2_GPIO_CLK_RST		0x001c
+
 #endif /* __SOC_K1_SYSCON_H__ */
-- 
2.45.2

[PATCH v12 6/6] riscv: dts: spacemit: add reset support for the K1 SoC

[Alex Elder]

Define syscon nodes for the RCPU, RCPU2, and APBC2 SpacemiT CCUS, which
currently support resets but not clocks in the SpacemiT K1.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 14097f1f6f447..4bc69bebfebfa 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -346,6 +346,18 @@ soc {
 		dma-noncoherent;
 		ranges;
 
+		syscon_rcpu: system-controller@c0880000 {
+			compatible = "spacemit,k1-syscon-rcpu";
+			reg = <0x0 0xc0880000 0x0 0x2048>;
+			#reset-cells = <1>;
+		};
+
+		syscon_rcpu2: system-controller@c0888000 {
+			compatible = "spacemit,k1-syscon-rcpu2";
+			reg = <0x0 0xc0888000 0x0 0x28>;
+			#reset-cells = <1>;
+		};
+
 		syscon_apbc: system-controller@d4015000 {
 			compatible = "spacemit,k1-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;
@@ -562,6 +574,12 @@ clint: timer@e4000000 {
 					      <&cpu7_intc 3>, <&cpu7_intc 7>;
 		};
 
+		syscon_apbc2: system-controller@f0610000 {
+			compatible = "spacemit,k1-syscon-apbc2";
+			reg = <0x0 0xf0610000 0x0 0x20>;
+			#reset-cells = <1>;
+		};
+
 		sec_uart1: serial@f0612000 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xf0612000 0x0 0x100>;
-- 
2.45.2

Re: [PATCH v12 5/6] reset: spacemit: add support for SpacemiT CCU resets

[Philipp Zabel]

Hi Stephen, Mike

On Mi, 2025-07-02 at 06:37 -0500, Alex Elder wrote:
> Implement reset support for SpacemiT CCUs.  A SpacemiT reset controller
> device is an auxiliary device associated with a clock controller (CCU).
> 
> This patch defines the reset controllers for the MPMU, APBC, and MPMU
> CCUs, which already define clock controllers.  It also adds RCPU, RCPU2,
> and ACPB2 CCUs, which only define resets.
> 
> Signed-off-by: Alex Elder <elder@riscstar.com>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Yixun Lan <dlan@gentoo.org>

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

To be merged via the clk tree, if Stephen is ok with that.

regards
Philipp

Re: [PATCH v12 5/6] reset: spacemit: add support for SpacemiT CCU resets

[Yixun Lan]

Hi Philipp, Stephen, Mike

On 11:46 Mon 07 Jul     , Philipp Zabel wrote:
> Hi Stephen, Mike
> 
> On Mi, 2025-07-02 at 06:37 -0500, Alex Elder wrote:
> > Implement reset support for SpacemiT CCUs.  A SpacemiT reset controller
> > device is an auxiliary device associated with a clock controller (CCU).
> > 
> > This patch defines the reset controllers for the MPMU, APBC, and MPMU
> > CCUs, which already define clock controllers.  It also adds RCPU, RCPU2,
> > and ACPB2 CCUs, which only define resets.
> > 
> > Signed-off-by: Alex Elder <elder@riscstar.com>
> > Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> > Reviewed-by: Yixun Lan <dlan@gentoo.org>
> 
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> 
> To be merged via the clk tree, if Stephen is ok with that.
> 
ok, I'll just go ahead and prepare a PR for this,
and leave Stephen to take care of the rest..

thanks all!
-- 
Yixun Lan (dlan)

Re: (subset) [PATCH v12 0/6] reset: spacemit: add K1 reset support

[Yixun Lan]

On Wed, 02 Jul 2025 06:37:02 -0500, Alex Elder wrote:
> This series adds reset controller support for the SpacemiT K1 SoC.
> A SpacemiT reset controller is implemented as an auxiliary device
> associated with a clock controller (CCU).  A new header file
> holds definitions used by both the clock and reset drivers.
> 
> The only change in this version is that three of the the four resets
> associated with each PCIe port have been renamed, to align better
> with their corresponding clocks.  This affects patches 1 and 5.
> For example, for PCIe port 0:
> 
> [...]

Applied, thanks!

[1/6] dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
      https://github.com/spacemit-com/linux/commit/25a59e813cd2ca728047f657d64f9b29480be393
[2/6] soc: spacemit: create a header for clock/reset registers
      https://github.com/spacemit-com/linux/commit/bf6239ddaa6a73a44cd8ea3afec5fc82ed900038
[3/6] clk: spacemit: set up reset auxiliary devices
      https://github.com/spacemit-com/linux/commit/988543522ebd6a9af53c288833503f0501e401b0
[4/6] clk: spacemit: define three reset-only CCUs
      https://github.com/spacemit-com/linux/commit/024b84f661674dcfa1341c90ce654c485c4ab756
[5/6] reset: spacemit: add support for SpacemiT CCU resets
      https://github.com/spacemit-com/linux/commit/c479d7cf06c3d65532442fa368b058e05dbba1a2

Best regards,
-- 
Yixun Lan

Re: (subset) [PATCH v12 0/6] reset: spacemit: add K1 reset support

[Yixun Lan]

On Wed, 02 Jul 2025 06:37:02 -0500, Alex Elder wrote:
> This series adds reset controller support for the SpacemiT K1 SoC.
> A SpacemiT reset controller is implemented as an auxiliary device
> associated with a clock controller (CCU).  A new header file
> holds definitions used by both the clock and reset drivers.
> 
> The only change in this version is that three of the the four resets
> associated with each PCIe port have been renamed, to align better
> with their corresponding clocks.  This affects patches 1 and 5.
> For example, for PCIe port 0:
> 
> [...]

Applied, thanks!

[6/6] riscv: dts: spacemit: add reset support for the K1 SoC
      https://github.com/spacemit-com/linux/commit/2c0cf4fed0f440200833ddfc24ea02de2cdc217c

Best regards,
-- 
Yixun Lan