From: Nick <nick.li@foursemi.com>
To: lgirdwood@gmail.com, broonie@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, perex@perex.cz,
tiwai@suse.com, nick.li@foursemi.com
Cc: like.sin@gmail.com, xiaoming.yang@foursemi.com,
danyang.zheng@foursemi.com, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/4] ASoC: dt-bindings: Add dt bindings for FS2104/5S audio amplifiers
Date: Thu, 3 Jul 2025 11:56:38 +0800 [thread overview]
Message-ID: <20250703035639.7252-4-nick.li@foursemi.com> (raw)
In-Reply-To: <20250703035639.7252-1-nick.li@foursemi.com>
From: Nick Li <nick.li@foursemi.com>
This patch adds bindings for FourSemi FS2104/5S audio amplifiers
which can support both I2S and I2C interface.
Signed-off-by: Nick Li <nick.li@foursemi.com>
---
.../bindings/sound/foursemi,fs210x.yaml | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/foursemi,fs210x.yaml
diff --git a/Documentation/devicetree/bindings/sound/foursemi,fs210x.yaml b/Documentation/devicetree/bindings/sound/foursemi,fs210x.yaml
new file mode 100644
index 000000000..3a1aba9b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/foursemi,fs210x.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/foursemi,fs210x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FourSemi FS2104/5S Digital Audio Amplifier
+
+maintainers:
+ - Nick <nick.li@foursemi.com>
+
+description: |
+ The FS2104 is a 15W Inductor-Less, Stereo, Closed-Loop,
+ Digital Input Class-D Power Amplifier with Enhanced Signal Processing.
+ The FS2105S is a 30W Inductor-Less, Stereo, Closed-Loop,
+ Digital Input Class-D Power Amplifier with Enhanced Signal Processing.
+
+properties:
+ compatible:
+ enum:
+ - foursemi,fs2104
+ - foursemi,fs2105s
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the amplifier. Refer to datasheet for possible values:
+ 0x68/0x69/0x6A/0x6B
+
+ clocks:
+ items:
+ - description: The clock of I2S BCLK
+
+ clock-names:
+ items:
+ - const: bclk
+
+ '#sound-dai-cells':
+ const: 0
+
+ pvdd-supply:
+ description: |
+ Regulator for power supply(PVDD in datasheet).
+
+ dvdd-supply:
+ description: |
+ Regulator for digital supply(DVDD in datasheet).
+
+ sdz-gpios:
+ maxItems: 1
+ description: |
+ SDZ(Shut Down) pin is active low, it will power down the chip,
+ and then reset the chip to shut down state.
+
+ fs,fwm-name:
+ description: |
+ The name of firmware that should be loaded for this
+ instance. The firmware is gernerated by FourSemi's tuning tool.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ fs,dai-name:
+ description: |
+ The name of FS210x DAI, it can be set different name when
+ there are multiple FS210x devices in the system.
+ $ref: /schemas/types.yaml#/definitions/string
+
+required:
+ - compatible
+ - reg
+ - sdz-gpios
+ - fs,fwm-name
+ - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@68 {
+ compatible = "foursemi,fs2105s";
+ reg = <0x68>;
+ pvdd-supply = <&pvdd_supply>;
+ dvdd-supply = <&dvdd_supply>;
+ sdz-gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fs210x_pins_default>;
+ fs,fwm-name = "fs2105s-btl-2p0-0s.bin";
+ clocks = <&clocks 18>;
+ clock-names = "bclk";
+ #sound-dai-cells = <0>;
+ };
+ };
--
2.39.5
next prev parent reply other threads:[~2025-07-03 3:57 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-03 3:56 [PATCH v1 0/4] ASoC: codecs: Add support for FourSemi FS2104/5S Nick
2025-07-03 3:56 ` [PATCH v1 1/4] ASoC: codecs: Add library for FourSemi audio amplifiers Nick
2025-07-03 3:56 ` [PATCH v1 2/4] ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver Nick
2025-07-03 14:59 ` Mark Brown
2025-07-04 11:12 ` Nick Li
2025-07-04 14:37 ` Mark Brown
2025-07-07 8:34 ` Nick Li
2025-07-07 20:42 ` Mark Brown
2025-07-03 3:56 ` Nick [this message]
2025-07-03 5:48 ` [PATCH v1 3/4] ASoC: dt-bindings: Add dt bindings for FS2104/5S audio amplifiers Rob Herring (Arm)
2025-07-03 6:36 ` Krzysztof Kozlowski
2025-07-04 6:00 ` Nick Li
2025-07-03 7:10 ` Krzysztof Kozlowski
2025-07-03 7:15 ` Krzysztof Kozlowski
2025-07-04 7:26 ` Nick Li
2025-07-04 7:18 ` Nick Li
2025-07-03 3:56 ` [PATCH v1 4/4] dt-bindings: vendor-prefixes: Add Shanghai FourSemi Semiconductor Co.,Ltd Nick
2025-07-03 5:48 ` Rob Herring (Arm)
2025-07-08 11:28 ` [PATCH v2 0/4] ASoC: codecs: Add support for FourSemi FS2104/5S Nick Li
2025-07-08 11:28 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: Add Shanghai FourSemi Semiconductor Co.,Ltd Nick Li
2025-07-09 10:36 ` Krzysztof Kozlowski
2025-07-08 11:28 ` [PATCH v2 2/4] ASoC: dt-bindings: Add schema for FS2104/5S audio amplifiers Nick Li
2025-07-09 10:40 ` Krzysztof Kozlowski
2025-07-10 8:11 ` Nick Li
2025-07-10 8:27 ` Krzysztof Kozlowski
2025-07-10 9:26 ` Nick Li
2025-07-09 10:42 ` Krzysztof Kozlowski
2025-07-10 8:02 ` Nick Li
2025-07-08 11:29 ` [PATCH v2 3/4] ASoC: codecs: Add library for FourSemi " Nick Li
2025-07-08 11:29 ` [PATCH v2 4/4] ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver Nick Li
2025-07-09 10:55 ` Krzysztof Kozlowski
2025-07-10 7:56 ` Nick Li
2025-07-10 8:27 ` Krzysztof Kozlowski
2025-07-10 11:20 ` Nick Li
2025-07-09 11:29 ` Mark Brown
2025-07-10 8:57 ` Nick Li
2025-07-10 9:29 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250703035639.7252-4-nick.li@foursemi.com \
--to=nick.li@foursemi.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=danyang.zheng@foursemi.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=like.sin@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
--cc=xiaoming.yang@foursemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).