[PATCH] arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1

[PATCH] arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1

[Bryan Brattlof]

From: Hong Guan <hguan@ti.com>

The &main_uart1, which is reserved for TIFS firmware traces, is routed
to the onboard FT4232 via a FET swich which is connected to pin A21 and
B21 of the SoC and not E17 and C17. Fix it.

Fixes: cf39ff15cc01a ("arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart")
Cc: stable@vger.kernel.org
Signed-off-by: Hong Guan <hguan@ti.com>
[bb@ti.com: expanded commit message]
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 3a8b45272526037b364e6e39886fcc9199114105..f11284b3fe8e23b4c48d8d2f3a7202e80dc57370 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -301,8 +301,8 @@ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
 
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
-			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
-			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */
+			AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */
 			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
 			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
 		>;

---
base-commit: 036cc33070b35754f45da50d81f8c3c85191c8b7
change-id: 20250707-uart-fixes-6efe27a1afe4

Best regards,
-- 
Bryan Brattlof <bb@ti.com>

Re: [PATCH] arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1

[Vignesh Raghavendra]

Hi Bryan Brattlof,

On Mon, 07 Jul 2025 11:55:13 -0500, Bryan Brattlof wrote:
> The &main_uart1, which is reserved for TIFS firmware traces, is routed
> to the onboard FT4232 via a FET swich which is connected to pin A21 and

Reword this bit locally along with s/swich/switch.

>
> B21 of the SoC and not E17 and C17. Fix it.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1
      commit: 8e44ac61abaae56fc6eb537a04ed78b458c5b984

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh