[PATCH v6 6/7] arm64: dts: qcom: qcm2290: Add Venus video node

[Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>]

Add DT entries for the qcm2290 Venus encoder/decoder.

Co-developed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 55 +++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f49ac1c1f8a3..7cfacd189a10 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1628,6 +1628,61 @@ adreno_smmu: iommu@59a0000 {
 			#iommu-cells = <2>;
 		};
 
+		venus: video-codec@5a00000 {
+			compatible = "qcom,qcm2290-venus";
+			reg = <0 0x5a00000 0 0xf0000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc GCC_VENUS_GDSC>,
+					<&gcc GCC_VCODEC0_GDSC>,
+					<&rpmpd QCM2290_VDDCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+				 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+				 <&gcc GCC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "throttle",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			memory-region = <&pil_video_mem>;
+			iommus = <&apps_smmu 0x860 0x0>,
+				 <&apps_smmu 0x880 0x0>,
+				 <&apps_smmu 0x861 0x04>,
+				 <&apps_smmu 0x863 0x0>,
+				 <&apps_smmu 0x804 0xe0>;
+
+			interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133333333 {
+					opp-hz = /bits/ 64 <133333333>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+			};
+		};
+
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,qcm2290-mdss";
 			reg = <0x0 0x05e00000 0x0 0x1000>;
-- 
2.34.1