[PATCH v9 00/13] further mt7988 devicetree work

[Frank Wunderlich <linux@fw-web.de>]

From: Frank Wunderlich <frank-w@public-files.de>

This series continues mt7988 devicetree work

- Extend cpu frequency scaling with CCI
- GPIO leds
- Basic network-support (ethernet controller + builtin switch + SFP Cages)

depencies (i hope this list is complete and latest patches/series linked):

support interrupt-names is optional again as i re-added the reserved IRQs
(they are not unusable as i thought and can allow features in future)
https://patchwork.kernel.org/project/netdevbpf/patch/20250619132125.78368-2-linux@fw-web.de/

needs change in mtk ethernet driver for the sram to be read from separate node:
https://patchwork.kernel.org/project/netdevbpf/patch/c2b9242229d06af4e468204bcf42daa1535c3a72.1751461762.git.daniel@makrotopia.org/

for SFP-Function (macs currently disabled):

PCS clearance which is a 1.5 year discussion currently ongoing

Daniel asked netdev for a way 2 go:
https://lore.kernel.org/netdev/aEwfME3dYisQtdCj@pidgin.makrotopia.org/

e.g. something like this (one of):
* https://patchwork.kernel.org/project/netdevbpf/patch/20250610233134.3588011-4-sean.anderson@linux.dev/ (v6)
* https://patchwork.kernel.org/project/netdevbpf/patch/20250511201250.3789083-4-ansuelsmth@gmail.com/ (v4)
* https://patchwork.kernel.org/project/netdevbpf/patch/ba4e359584a6b3bc4b3470822c42186d5b0856f9.1721910728.git.daniel@makrotopia.org/

full usxgmii driver:
https://patchwork.kernel.org/project/netdevbpf/patch/07845ec900ba41ff992875dce12c622277592c32.1702352117.git.daniel@makrotopia.org/

first PCS-discussion is here:
https://patchwork.kernel.org/project/netdevbpf/patch/8aa905080bdb6760875d62cb3b2b41258837f80e.1702352117.git.daniel@makrotopia.org/
some more here:
https://lore.kernel.org/netdev/20250511201250.3789083-4-ansuelsmth@gmail.com/

and then dts nodes for sgmiisys+usxgmii+2g5 firmware

when above depencies are solved the mac1/2 can be enabled and 2.5G phy/SFP slots will work.

changes:
v9:
- dropped patches already applied (cci,gpio-leds,unused pins)
- added patches to add RSS IRQs, IRQ-names and sram-node for mt7986
  note: mt7981 does not have a ethernet node yet
- set minItems for Filogic (MT798x) IRQs/Names to 8
  needed to update MT7986 binding example because of this
- add sram:false to non-Filogic SoCs

v8:
- splitted binding into irq-count and irq-names and updated description
- fixed typo in mt7621 section "interrupt-namess"
- splitted binding changes into fixes (mac) and additions (sram)
- dropped change of reg (simple count to description)
- change ethernet register size to 0x40000

v7:
- fixed rebasing error while splitting dt-binding patch

v6:
binding:
- split out the interrupt-names into separate patch
- update irq(name) min count to 4
- move interrupt-names up
- add sram-property
- drop second reg entry and minitems as there is only 1 item left

dts:
- fix whitespace-errors for pdma irqs (spaces vs. tabs)
- move sram from eth reg to own sram node (needs CONFIG_SRAM)

v5:
- add reserved irqs and change names
- update binding for 8 irqs with different names (rx,tx => fe1+fe2, rx-ringX => pdmaX)
  (dropped Robs RB due to this change again, sorry)

v4:
  net-binding:
    - allow interrupt names and increase max interrupts to 6 because of RSS/LRO interrupts
      (dropped Robs RB due to this change)

  dts-patches:
  - add interrupts for RSS/LRO and interrupt-names for ethernet node
  - eth-reg and clock whitespace-fix
  - comment for fixed-link on gmac0
  - drop phy-mode properties as suggested by andrew
  - drop phy-connection-type on 2g5 board
  - reorder some properties
  - update 2g5 phy node
    - unit-name dec instead of hex to match reg property
    - move compatible before reg
    - drop phy-mode

v3:
  - dropped patches already applied (SPI+thermal)
  - added soc specific cci compatible (new binding patch + changed dts)
  - enable 2g5 phy because driver is now merged
  - add patch for cleaning up unnecessary pins
  - add patch for gpio-leds
  - add patch for adding ethernet aliases

v2:
  - change reg to list of items in eth binding
  - changed mt7530 binding:
    - unevaluatedProperties=false
    - mediatek,pio subproperty
    - from patternProperty to property
  - board specific properties like led function and labels moved to bpi-r4 dtsi

Frank Wunderlich (13):
  dt-bindings: net: mediatek,net: update mac subnode pattern for mt7988
  dt-bindings: net: mediatek,net: allow up to 8 IRQs
  dt-bindings: net: mediatek,net: allow irq names
  dt-bindings: net: mediatek,net: add sram property
  dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for
    mt7988
  dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus
  arm64: dts: mediatek: mt7986: add sram node
  arm64: dts: mediatek: mt7986: add interrupts for RSS and interrupt
    names
  arm64: dts: mediatek: mt7988: add basic ethernet-nodes
  arm64: dts: mediatek: mt7988: add switch node
  arm64: dts: mediatek: mt7988a-bpi-r4: add aliases for ethernet
  arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac
  arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds

 .../bindings/net/dsa/mediatek,mt7530.yaml     |  24 +-
 .../devicetree/bindings/net/mediatek,net.yaml |  64 +++-
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     |  20 +-
 .../mediatek/mt7988a-bananapi-bpi-r4-2g5.dts  |  11 +
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  |  19 ++
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi |  86 ++++++
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi     | 285 +++++++++++++++++-
 7 files changed, 497 insertions(+), 12 deletions(-)

-- 
2.43.0