* [PATCH v4 1/3] dt-bindings: arm: ti: Add bindings for Variscite VAR-SOM-AM62P
2025-07-11 14:04 [PATCH v4 0/3] Add support for Variscite VAR-SOM-AM62P5 and Symphony board Stefano Radaelli
@ 2025-07-11 14:04 ` Stefano Radaelli
2025-07-11 14:04 ` [PATCH v4 2/3] arm64: dts: ti: Add support " Stefano Radaelli
2025-07-11 14:04 ` [PATCH v4 3/3] arm64: dts: ti: var-som-am62p: Add support for Variscite Symphony Board Stefano Radaelli
2 siblings, 0 replies; 5+ messages in thread
From: Stefano Radaelli @ 2025-07-11 14:04 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Stefano Radaelli, Rob Herring, Nishanth Menon,
Vignesh Raghavendra, Tero Kristo, Krzysztof Kozlowski,
Conor Dooley, linux-arm-kernel
Add devicetree bindings for Variscite VAR-SOM-AM62P System on Module
and its carrier boards.
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
v4:
- Added Acked-by
v3:
- Change compatible string to match existing mainline format
v2:
- Add symphony carrier board compatible
Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index bf6003d8fb76..d56046e439e9 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -100,6 +100,12 @@ properties:
- const: toradex,verdin-am62p # Verdin AM62P Module
- const: ti,am62p5
+ - description: K3 AM62P5 SoC Variscite SOM and Carrier Boards
+ items:
+ - const: variscite,var-som-am62p-symphony
+ - const: variscite,var-som-am62p
+ - const: ti,am62p5
+
- description: K3 AM642 SoC
items:
- enum:
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v4 2/3] arm64: dts: ti: Add support for Variscite VAR-SOM-AM62P
2025-07-11 14:04 [PATCH v4 0/3] Add support for Variscite VAR-SOM-AM62P5 and Symphony board Stefano Radaelli
2025-07-11 14:04 ` [PATCH v4 1/3] dt-bindings: arm: ti: Add bindings for Variscite VAR-SOM-AM62P Stefano Radaelli
@ 2025-07-11 14:04 ` Stefano Radaelli
2025-08-13 13:43 ` Nishanth Menon
2025-07-11 14:04 ` [PATCH v4 3/3] arm64: dts: ti: var-som-am62p: Add support for Variscite Symphony Board Stefano Radaelli
2 siblings, 1 reply; 5+ messages in thread
From: Stefano Radaelli @ 2025-07-11 14:04 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Stefano Radaelli, Nishanth Menon, Vignesh Raghavendra,
Tero Kristo, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel
Add device tree support for the Variscite VAR-SOM-AM62P system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- AM62P Sitara MPU processor
- Up to 8GB of DDR4-3733 memory
- eMMC storage memory
- PS6522430 chip as a Power Management Integrated circuit (PMIC)
- Integrated 10/100/1000 Mbps Ethernet Transceiver Analog Devices ADIN1300
- Resistive touch panel interface controller TI TSC2046
- I2C interfaces
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://www.variscite.it/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
---
v4:
- Moved every MCUs-related node into the SOM dtsi
- Removed unused audio node
v3:
- Change compatible string to match existing mainline format
- Lower case hex digits
- Generic node names
v2:
- Fixed warnings and cleanup
arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 408 ++++++++++++++++++
1 file changed, 408 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
new file mode 100644
index 000000000000..9c8046111701
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for Variscite VAR-SOM-AM62P
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am62p5.dtsi"
+
+/ {
+ compatible = "variscite,var-som-am62p", "ti,am62p5";
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <10000>;
+ reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>, /* WIFI_PWR_EN */
+ <&main_gpio0 59 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ };
+
+ mmc_pwrseq: mmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc_pwrseq>;
+ reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>;
+ };
+
+ memory@80000000 {
+ /* 8G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000001 0x80000000>;
+ device_type = "memory";
+ bootph-pre-ram;
+ };
+
+ opp-table {
+ /* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rtos_ipc_memory_region: rtos-ipc-memory@9b500000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b500000 0x00 0x00300000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x00100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0x00f00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x00100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x01e00000>;
+ no-map;
+ };
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ no-map;
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3v3_phy: regulator-3v3-phy {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V3.3_PHY";
+ gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ status="okay";
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+};
+
+&cpsw3g_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+ cpsw3g_phy0: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "ethernet-phy-id0283.bc30";
+ reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&cpsw_port1 {
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&main_pmx0 {
+ pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */
+ >;
+ };
+
+ pinctrl_i2c2: main-i2c2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
+ AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ pinctrl_i2c3: main-i2c3-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */
+ AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */
+ >;
+ };
+
+ pinctrl_mdio1: main-mdio1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
+ AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
+ >;
+ };
+
+ pinctrl_mmc2: main-mmc2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */
+ AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */
+ AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */
+ AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */
+ AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
+ AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
+ AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
+ >;
+ };
+
+ pinctrl_rgmii1: main-rgmii1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
+ AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
+ AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
+ AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
+ AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
+ AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
+ AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
+ AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
+ AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
+ AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
+ AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
+ AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_spi0: main-spi0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */
+ AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */
+ AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */
+ AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */
+ >;
+ };
+
+ pinctrl_uart5: main-uart5-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */
+ AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */
+ AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */
+ AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */
+ >;
+ };
+
+ pinctrl_bt: main-btgrp-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */
+ >;
+ };
+
+ pinctrl_restouch: main-restouch-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */
+ >;
+ };
+
+ pinctrl_wifi: main-wifi-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */
+ AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */
+ >;
+ };
+};
+
+&mcu_pmx0 {
+ pinctrl_wkup_clkout0: wkup-clkout0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */
+ >;
+ };
+};
+
+&main_spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ ti,pindir-d0-out-d1-in;
+
+ touchscreen@0 {
+ compatible = "ti,ads7846";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_restouch>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <48 IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <1500000>;
+ pendown-gpio = <&main_gpio0 48 GPIO_ACTIVE_LOW>;
+ ti,x-min = /bits/ 16 <125>;
+ ti,x-max = /bits/ 16 <4008>;
+ ti,y-min = /bits/ 16 <282>;
+ ti,y-max = /bits/ 16 <3864>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,debounce-max = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ ti,keep-vref-on;
+ wakeup-source;
+ };
+};
+
+&main_uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ ti,driver-strength-ohm = <50>;
+ mmc-pwrseq = <&mmc_pwrseq>;
+ disable-wp;
+ bootph-all;
+};
+
+&sdhci2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>;
+ bus-width = <4>;
+ disable-wp;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ ti,fails-without-test-cd;
+ status = "okay";
+};
+
+&usbss0 {
+ ti,vbus-divider;
+};
+
+&usbss1 {
+ ti,vbus-divider;
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+ status = "reserved";
+};
+
+&mcu_gpio_intr {
+ status = "reserved";
+};
+
+&wkup_rtc0 {
+ status = "disabled";
+};
+
+&wkup_rti0 {
+ /* WKUP RTI0 is used by DM firmware */
+ status = "reserved";
+};
+
+&wkup_uart0 {
+ /* WKUP UART0 is used by DM firmware */
+ status = "reserved";
+};
+
+&main_uart1 {
+ /* Main UART1 is used by TIFS firmware */
+ status = "reserved";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v4 2/3] arm64: dts: ti: Add support for Variscite VAR-SOM-AM62P
2025-07-11 14:04 ` [PATCH v4 2/3] arm64: dts: ti: Add support " Stefano Radaelli
@ 2025-08-13 13:43 ` Nishanth Menon
0 siblings, 0 replies; 5+ messages in thread
From: Nishanth Menon @ 2025-08-13 13:43 UTC (permalink / raw)
To: Stefano Radaelli
Cc: devicetree, linux-kernel, Vignesh Raghavendra, Tero Kristo,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel
On 16:04-20250711, Stefano Radaelli wrote:
> Add device tree support for the Variscite VAR-SOM-AM62P system on module.
> This SOM is designed to be used with various carrier boards.
>
> The module includes:
> - AM62P Sitara MPU processor
> - Up to 8GB of DDR4-3733 memory
> - eMMC storage memory
> - PS6522430 chip as a Power Management Integrated circuit (PMIC)
> - Integrated 10/100/1000 Mbps Ethernet Transceiver Analog Devices ADIN1300
> - Resistive touch panel interface controller TI TSC2046
> - I2C interfaces
>
> Only SOM-specific peripherals are enabled by default. Carrier board
> specific interfaces are left disabled to be enabled in the respective
> carrier board device trees.
>
> Link: https://www.variscite.it/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
>
> Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
> ---
Could you update to match up with coding guidelines for device tree?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117
I see a few ones below that I tagged.
> v4:
> - Moved every MCUs-related node into the SOM dtsi
> - Removed unused audio node
> v3:
> - Change compatible string to match existing mainline format
> - Lower case hex digits
> - Generic node names
> v2:
> - Fixed warnings and cleanup
>
> arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 408 ++++++++++++++++++
> 1 file changed, 408 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
> new file mode 100644
> index 000000000000..9c8046111701
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
> @@ -0,0 +1,408 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Common dtsi for Variscite VAR-SOM-AM62P
Please add the link to the SoM here, I think it is
https://www.variscite.com/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
> + *
> + * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "k3-am62p5.dtsi"
> +
> +/ {
> + compatible = "variscite,var-som-am62p", "ti,am62p5";
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + post-power-on-delay-ms = <100>;
> + power-off-delay-us = <10000>;
> + reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>, /* WIFI_PWR_EN */
> + <&main_gpio0 59 GPIO_ACTIVE_LOW>; /* WIFI_EN */
> + };
> +
> + mmc_pwrseq: mmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mmc_pwrseq>;
> + reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>;
> + };
> +
> + memory@80000000 {
> + /* 8G RAM */
> + reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
> + <0x00000008 0x80000000 0x00000001 0x80000000>;
> + device_type = "memory";
> + bootph-pre-ram;
> + };
> +
> + opp-table {
> + /* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */
> + opp-1400000000 {
> + opp-hz = /bits/ 64 <1400000000>;
> + opp-supported-hw = <0x01 0x0004>;
> + clock-latency-ns = <6000000>;
> + };
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + rtos_ipc_memory_region: rtos-ipc-memory@9b500000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b500000 0x00 0x00300000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b800000 0x00 0x00100000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b900000 0x00 0x00f00000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c800000 0x00 0x00100000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c900000 0x00 0x01e00000>;
> + no-map;
> + };
> +
> + secure_tfa_ddr: tfa@9e780000 {
> + reg = <0x00 0x9e780000 0x00 0x80000>;
> + no-map;
> + };
> +
> + secure_ddr: optee@9e800000 {
> + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
> + no-map;
> + };
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "On-module +V3.3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + reg_1v8: regulator-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "On-module +V1.8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <®_3v3>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + reg_3v3_phy: regulator-3v3-phy {
> + compatible = "regulator-fixed";
> + regulator-name = "On-module +V3.3_PHY";
> + gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;
> + status="okay";
Why status = "okay" - default is okay.
> + };
> +};
> +
> +&cpsw3g {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1>;
> +};
> +
> +&cpsw3g_mdio {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mdio1>;
Please move status here
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117
Please add an EoL here
> + cpsw3g_phy0: ethernet-phy@4 {
> + reg = <4>;
> + compatible = "ethernet-phy-id0283.bc30";
reg after compatible
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117
> + reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> + reset-deassert-us = <100000>;
> + };
> +};
> +
> +&cpsw_port1 {
> + /*
> + * The required RGMII TX and RX 2ns delays are implemented directly
> + * in hardware via passive delay elements on the SOM PCB.
> + * No delay configuration is needed in software via PHY driver.
> + */
> + phy-mode = "rgmii";
> + phy-handle = <&cpsw3g_phy0>;
> + status = "okay";
> +};
> +
> +&main_i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&main_i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&main_pmx0 {
> + pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */
> + >;
> + };
> +
> + pinctrl_i2c2: main-i2c2-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
> + AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
> + >;
> + };
> +
> + pinctrl_i2c3: main-i2c3-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */
> + AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */
> + >;
> + };
> +
> + pinctrl_mdio1: main-mdio1-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
> + AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
> + >;
> + };
> +
> + pinctrl_mmc2: main-mmc2-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */
> + AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */
> + AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */
> + AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */
> + AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
> + AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
> + AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
> + >;
> + };
> +
> + pinctrl_rgmii1: main-rgmii1-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
> + AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
> + AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
> + AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
> + AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
> + AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
> + AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
> + AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
> + AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
> + AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
> + AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
> + AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
> + >;
> + bootph-all;
> + };
> +
> + pinctrl_spi0: main-spi0-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */
> + AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */
> + AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */
> + AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */
> + >;
> + };
> +
> + pinctrl_uart5: main-uart5-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */
> + AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */
> + AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */
> + AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */
> + >;
> + };
> +
> + pinctrl_bt: main-btgrp-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */
> + >;
> + };
> +
> + pinctrl_restouch: main-restouch-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */
> + >;
> + };
> +
> + pinctrl_wifi: main-wifi-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */
> + AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */
> + >;
> + };
> +};
> +
> +&mcu_pmx0 {
> + pinctrl_wkup_clkout0: wkup-clkout0-default-pins {
> + pinctrl-single,pins = <
> + AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */
> + >;
> + };
> +};
> +
> +&main_spi0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0>;
> + ti,pindir-d0-out-d1-in;
Status here
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117
> +
> + touchscreen@0 {
> + compatible = "ti,ads7846";
Do you have the touch screen controller on the SoM? Typically they tend
to be on the display panel, no? If that is the case, you might want to
do an overlay for the display panel and add the touchscreen there.
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_restouch>;
> + interrupt-parent = <&main_gpio0>;
> + interrupts = <48 IRQ_TYPE_EDGE_FALLING>;
> + spi-max-frequency = <1500000>;
> + pendown-gpio = <&main_gpio0 48 GPIO_ACTIVE_LOW>;
> + ti,x-min = /bits/ 16 <125>;
> + ti,x-max = /bits/ 16 <4008>;
> + ti,y-min = /bits/ 16 <282>;
> + ti,y-max = /bits/ 16 <3864>;
> + ti,x-plate-ohms = /bits/ 16 <180>;
> + ti,pressure-max = /bits/ 16 <255>;
> + ti,debounce-max = /bits/ 16 <10>;
> + ti,debounce-tol = /bits/ 16 <3>;
> + ti,debounce-rep = /bits/ 16 <1>;
> + ti,settle-delay-usec = /bits/ 16 <150>;
> + ti,keep-vref-on;
> + wakeup-source;
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n117
> + };
> +};
> +
> +&main_uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "nxp,88w8987-bt";
> + };
> +};
> +
> +&sdhci0 {
> + status = "okay";
> + ti,driver-strength-ohm = <50>;
> + mmc-pwrseq = <&mmc_pwrseq>;
> + disable-wp;
> + bootph-all;
> +};
> +
> +&sdhci2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>;
> + bus-width = <4>;
> + disable-wp;
> + non-removable;
> + keep-power-in-suspend;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + ti,fails-without-test-cd;
> + status = "okay";
> +};
> +
> +&usbss0 {
> + ti,vbus-divider;
> +};
> +
> +&usbss1 {
> + ti,vbus-divider;
> +};
> +
> +&mailbox0_cluster0 {
> + status = "okay";
> +
> + mbox_r5_0: mbox-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mailbox0_cluster1 {
> + status = "okay";
> +
> + mbox_mcu_r5_0: mbox-mcu-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mcu_r5fss0 {
> + status = "okay";
> +};
> +
> +&mcu_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> + <&mcu_r5fss0_core0_memory_region>;
> +};
> +
> +&wkup_r5fss0 {
> + status = "okay";
> +};
> +
> +&wkup_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> + <&wkup_r5fss0_core0_memory_region>;
> +};
> +
> +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
> +&mcu_gpio0 {
> + status = "reserved";
> +};
> +
> +&mcu_gpio_intr {
> + status = "reserved";
> +};
> +
> +&wkup_rtc0 {
> + status = "disabled";
> +};
> +
> +&wkup_rti0 {
> + /* WKUP RTI0 is used by DM firmware */
> + status = "reserved";
> +};
> +
> +&wkup_uart0 {
> + /* WKUP UART0 is used by DM firmware */
> + status = "reserved";
> +};
> +
> +&main_uart1 {
> + /* Main UART1 is used by TIFS firmware */
> + status = "reserved";
> +};
> --
> 2.43.0
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
https://ti.com/opensource
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 3/3] arm64: dts: ti: var-som-am62p: Add support for Variscite Symphony Board
2025-07-11 14:04 [PATCH v4 0/3] Add support for Variscite VAR-SOM-AM62P5 and Symphony board Stefano Radaelli
2025-07-11 14:04 ` [PATCH v4 1/3] dt-bindings: arm: ti: Add bindings for Variscite VAR-SOM-AM62P Stefano Radaelli
2025-07-11 14:04 ` [PATCH v4 2/3] arm64: dts: ti: Add support " Stefano Radaelli
@ 2025-07-11 14:04 ` Stefano Radaelli
2 siblings, 0 replies; 5+ messages in thread
From: Stefano Radaelli @ 2025-07-11 14:04 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Stefano Radaelli, Nishanth Menon, Vignesh Raghavendra,
Tero Kristo, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-kernel
Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-AM62P system on module.
The Symphony board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart interfaces
- OV5640 Camera support
- GPIO Expander
- CAN, I2C and general purpose interfaces
Link: https://www.variscite.it/product/single-board-computers/symphony-board/
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
---
v4:
- Moved every MCUs-related node into the SOM dtsi
v3:
- Change compatible string to match existing mainline format
- Fixed underscore typo
v2:
- Fixed warnings and cleanup
arch/arm64/boot/dts/ti/Makefile | 1 +
.../dts/ti/k3-am62p5-var-som-symphony.dts | 500 ++++++++++++++++++
2 files changed, 501 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index c6171de9fe88..f8b1ed3cbdfa 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
# Boards with AM62Px SoC
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-ivy.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
new file mode 100644
index 000000000000..832942a5060d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Variscite Symphony carrier board for VAR-SOM-AM62P
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-AM62P on Symphony-Board";
+ compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5";
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ serial0 = &main_uart0;
+ serial2 = &main_uart2;
+ serial5 = &main_uart5;
+ serial6 = &main_uart6;
+ spi5 = &main_spi2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk_ov5640_fixed: clock-24000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+ };
+
+ button-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-heartbeat {
+ label = "Heartbeat";
+ linux,default-trigger = "heartbeat";
+ gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p5v: regulator-1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_sdhc1_vmmc: regulator-sdhc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD";
+ vin-supply = <®_sdhc1_vmmc_int>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vmmc_int: regulator-sdhc1-int {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD_INT";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vmmc>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+ compatible = "regulator-gpio";
+ regulator-name = "+V3.3_SD_VQMMC";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vqmmc>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ reg_ov5640_buf_en: regulator-camera-buf-en {
+ compatible = "regulator-fixed";
+ regulator-name = "ov5640_buf_en";
+ gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ status="okay";
+ };
+
+ transceiver1: can-phy {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_extcon>;
+ label = "USB-C";
+ id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&cpsw3g {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>,
+ <&pinctrl_rgmii2>;
+};
+
+&cpsw3g_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+
+ cpsw3g_phy1: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "ethernet-phy-id0283.bc30";
+ reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&cpsw_port2 {
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the Symphony PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&main_i2c0{
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clock-frequency = <400000>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+ AVDD-supply = <®_2p8v>;
+ DOVDD-supply = <®_1p8v>;
+ DVDD-supply = <®_1p5v>;
+ powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ /* GPIO expander */
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ gpio-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ #gpio-cells = <2>;
+ status = "okay";
+
+ usb3-sel-hog {
+ gpio-hog;
+ gpios = <4 0>;
+ output-low;
+ line-name = "usb3_sel";
+ };
+
+ eth-som-vselect-hog {
+ gpio-hog;
+ gpios = <6 0>;
+ output-low;
+ line-name = "eth-vselect";
+ };
+
+ eth-mdio-enable-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ line-name = "eth-mdio-enable";
+ };
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ status = "okay";
+ };
+};
+
+&main_mcan0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mcan0>;
+ phys = <&transceiver1>;
+};
+
+&main_pmx0 {
+ pinctrl_extcon: main-extcon-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
+ >;
+ };
+
+ pinctrl_i2c0: main-i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+ AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+ >;
+ };
+
+ pinctrl_i2c1: main-i2c1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+ AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_mcan0: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */
+ AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */
+ >;
+ };
+
+ pinctrl_mmc1: main-mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+ AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+ AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+ AM62PX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H23) MMC1_DAT1 */
+ AM62PX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (H22) MMC1_DAT2 */
+ AM62PX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
+ AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_rgmii2: main-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+ AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+ AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+ AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+ AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+ AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+ AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+ AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+ AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+ AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+ AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */
+ AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+ >;
+ };
+
+ pinctrl_spi2: main-spi2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */
+ AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */
+ AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */
+ AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */
+ >;
+ };
+
+ pinctrl_uart0: main-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
+ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_uart2: main-uart2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */
+ AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */
+ >;
+ };
+
+ pinctrl_uart6: main-uart6-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */
+ AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */
+ >;
+ };
+
+ pinctrl_usb1: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */
+ >;
+ };
+
+ pinctrl_ov5640: main-ov5640-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */
+ AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */
+ AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */
+ >;
+ };
+
+ pinctrl_pca9534: main-pca9534-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */
+ >;
+ };
+
+ pinctrl_sd1_vmmc: main-sd1-vmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */
+ AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */
+ >;
+ bootph-all;
+ };
+};
+
+&main_spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ ti,pindir-d0-out-d1-in;
+ cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&main_uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&main_uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&main_uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD Card */
+ vmmc-supply = <®_sdhc1_vmmc>;
+ vqmmc-supply = <®_sdhc1_vqmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1>;
+ disable-wp;
+ status="okay";
+ bootph-all;
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&usb0 {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ status = "okay";
+};
+
+&usbss0 {
+ status = "okay";
+};
+
+&usbss1 {
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread