From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-ed1-f43.google.com (mail-ed1-f43.google.com [209.85.208.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A5DD92DCF6C; Fri, 11 Jul 2025 14:06:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.43 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752242762; cv=none; b=AAiTnrNK1Ap2WZA46YaanyD8vFme8vsFXWeh8AesgkqKZFKbWm5h23DoY9g9mSHgpyFoKQ3qJBGVHK3knjsW45oCErXYwzfWYRvfmAlobtcKM4OU9c2lZYa5rLbCSy1z5oUyelYBrICoydKBpD9lEskQUB7NTBhBiIesQDHL6dk= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1752242762; c=relaxed/simple; bh=dz+zNZXDBVlMcReTRFADMBEvteZxJsqTe0zhOFJ1h9o=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=QmyLOkIAgJTuvNqiOva9Bd5lMSKKYLMpqcEfines0VjU8vKFJdeuOuxXbvi3Uu2ppub3dvJf9bn/iqiH2bwfSIRD52UPAWNiQrU82PEGWPIgZbEz1NbdKivxoLCDG8PzkhmlQi4Qe+VGyXxAKNHyI0iD0uHARM1YZ0syKRCXDa8= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=fdnY3laH; arc=none smtp.client-ip=209.85.208.43 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="fdnY3laH" Received: by mail-ed1-f43.google.com with SMTP id 4fb4d7f45d1cf-611f74c1837so882689a12.3; Fri, 11 Jul 2025 07:06:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1752242759; x=1752847559; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=m0lq1OIgFanrAlOkaMFS5bhIY9bDen0M4DlSw6NBW5c=; b=fdnY3laHwv0QIkJ0SeVBCTxmR5u5jhusjl5spxsHodHYICCT+QKp/MLVZGCBIN48NE /4xoY2BTdgwsF186SA4583NxmqsweXDwt2Hr2Nz9CyHMxI2gG3F//0TT7DgNscCvYJFG AUwfu0/1yzqemZ7Vuvq7gC1hS087IzHkBQIYp2ebE42AnxK1J7yAZCFJrsxvH7yp/ST6 TNtTm0HrC99HTJusplzxZVaiofdfMsBHpV5OT6hi1gPK7qYSn81FxPoqS18Bu27fQFBN A2BsyPVafuJEcsKpeldK1ux3I2oUt0dalfCduFZl9xiL7161LjZYGXsMnc4YAAcQHAyS vomw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1752242759; x=1752847559; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=m0lq1OIgFanrAlOkaMFS5bhIY9bDen0M4DlSw6NBW5c=; b=pjiVK9CSDFcR/NuPUWNtFZeCQMCjIoMJuQuqrbvxosIlMKH7uSqh7tcJFQyhOK9buT 7d/gWxD4IvzSOQiglMlZcpU0vk0hqxT1h3S92MyzuZ7fk3FVkp5VZARzPpCQ9j54TfA+ gn6hWUqQCuUKZ1RxLzglb8/7Lm1U95UIrEyaoRpXDgn+mqvTCQnh3jzl1PG5YICM+Dpx 0eCwhIcv7BQ9hw1+cBZufNVAkL0kpRvxsFDhonE3NuDXwrZIsb7iv9YjYmcdvGqGN2/B 5dkvglpgm28sdO60KB6CcjtYsmbwGPN0MpdZTtRbHgzGe8iG4HUV1t0Ea6/AF1IfuIKX vWJg== X-Forwarded-Encrypted: i=1; AJvYcCVcusYu/MCkzp7kEjd93qPfyTiiemQBr4MYBQIcWZ/CkQxeebhBrE0GZZoGSHag6lBDUhdTk15/nwGE1ws=@vger.kernel.org X-Gm-Message-State: AOJu0Yzc4BLi72e+B/qa/eloVYIVQhoya2x0RX0YfUgYPYYdOpNZCjj6 l4YPtQqZZofTlSVc7N/ZhwameQ46B2HNueWUOlIIEnZfWWuUx/ekOiqUGD8M9ZHu X-Gm-Gg: ASbGncs3tpOLkOM9jdvCOhxaTVu98/hO2UCRgasd0py6YW8L5vZvlzaSlRY2TcqGP5q gOi/nB5cqrMJOhyfKkRxalsFAvyuKmaJWQqeX2x8YtxJdHwVKj0qRmaYymj4omtDF/WRtPyrYIE 2mABsR272RuD9v6l8BuzJIEjn6r3LUighYP3tjGbGSRlycsSxPoMM/I7ZluqUmiji7Ws+pQhwHx J65m/LlMjNXU3Ddo/tSP0ppJyjlScn8LkvCZo54VPvo3gmcZyY8+DKnDsmqwctz5xc7OHXxzTwx UofLW5q2vqx+xHBpjsQCoJB8ULDsPVW1ex10qAHDgVQOYvvzM5Xzk6XCjtRWzotka2YqQgHZPFS I+BtKLvJfN4k5xcD4E78wa+yPZGYKY/ga7vJms/5fskbMKBeBuNNr14uy7mKoWl8Oj4HjpMQA7B r6ymSOuw== X-Google-Smtp-Source: AGHT+IGxH5BTjf1Kt9lT03bzBZo+3sP09q8Dt1kE1+MNl0aAO+bPTpPIcyv9jsN5s3ahzst+vypxhw== X-Received: by 2002:a17:907:f815:b0:ae3:6a82:e6a2 with SMTP id a640c23a62f3a-ae6fbfa9d7emr367690966b.29.1752242758297; Fri, 11 Jul 2025 07:05:58 -0700 (PDT) Received: from Lord-Beerus.station (net-93-70-53-177.cust.vodafonedsl.it. [93.70.53.177]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-ae6e8294bd9sm303435166b.132.2025.07.11.07.05.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 11 Jul 2025 07:05:57 -0700 (PDT) From: Stefano Radaelli To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Stefano Radaelli , Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley , linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/3] arm64: dts: ti: Add support for Variscite VAR-SOM-AM62P Date: Fri, 11 Jul 2025 16:04:57 +0200 Message-ID: <20250711140507.17574-3-stefano.radaelli21@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20250711140507.17574-1-stefano.radaelli21@gmail.com> References: <20250711140507.17574-1-stefano.radaelli21@gmail.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add device tree support for the Variscite VAR-SOM-AM62P system on module. This SOM is designed to be used with various carrier boards. The module includes: - AM62P Sitara MPU processor - Up to 8GB of DDR4-3733 memory - eMMC storage memory - PS6522430 chip as a Power Management Integrated circuit (PMIC) - Integrated 10/100/1000 Mbps Ethernet Transceiver Analog Devices ADIN1300 - Resistive touch panel interface controller TI TSC2046 - I2C interfaces Only SOM-specific peripherals are enabled by default. Carrier board specific interfaces are left disabled to be enabled in the respective carrier board device trees. Link: https://www.variscite.it/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/ Signed-off-by: Stefano Radaelli --- v4: - Moved every MCUs-related node into the SOM dtsi - Removed unused audio node v3: - Change compatible string to match existing mainline format - Lower case hex digits - Generic node names v2: - Fixed warnings and cleanup arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 408 ++++++++++++++++++ 1 file changed, 408 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi new file mode 100644 index 000000000000..9c8046111701 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common dtsi for Variscite VAR-SOM-AM62P + * + * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/ + * + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "k3-am62p5.dtsi" + +/ { + compatible = "variscite,var-som-am62p", "ti,am62p5"; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>, /* WIFI_PWR_EN */ + <&main_gpio0 59 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + }; + + mmc_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc_pwrseq>; + reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>; + }; + + memory@80000000 { + /* 8G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000001 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + opp-table { + /* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rtos_ipc_memory_region: rtos-ipc-memory@9b500000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b500000 0x00 0x00300000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b800000 0x00 0x00100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b900000 0x00 0x00f00000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x00100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + no-map; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "On-module +V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "On-module +V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3v3_phy: regulator-3v3-phy { + compatible = "regulator-fixed"; + regulator-name = "On-module +V3.3_PHY"; + gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + status="okay"; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1>; + cpsw3g_phy0: ethernet-phy@4 { + reg = <4>; + compatible = "ethernet-phy-id0283.bc30"; + reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + }; +}; + +&cpsw_port1 { + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; +}; + +&main_pmx0 { + pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */ + >; + }; + + pinctrl_i2c2: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */ + AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + pinctrl_i2c3: main-i2c3-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */ + AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */ + >; + }; + + pinctrl_mdio1: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ + AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */ + >; + }; + + pinctrl_mmc2: main-mmc2-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */ + AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */ + AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */ + AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */ + AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */ + AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */ + AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */ + >; + }; + + pinctrl_rgmii1: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */ + AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */ + AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */ + AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */ + AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */ + AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */ + AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */ + AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */ + AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */ + AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */ + AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */ + AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */ + >; + bootph-all; + }; + + pinctrl_spi0: main-spi0-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */ + AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */ + AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */ + AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */ + >; + }; + + pinctrl_uart5: main-uart5-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */ + AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */ + AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */ + AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */ + >; + }; + + pinctrl_bt: main-btgrp-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */ + >; + }; + + pinctrl_restouch: main-restouch-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */ + >; + }; + + pinctrl_wifi: main-wifi-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */ + AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */ + >; + }; +}; + +&mcu_pmx0 { + pinctrl_wkup_clkout0: wkup-clkout0-default-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */ + >; + }; +}; + +&main_spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + ti,pindir-d0-out-d1-in; + + touchscreen@0 { + compatible = "ti,ads7846"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&main_gpio0>; + interrupts = <48 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <1500000>; + pendown-gpio = <&main_gpio0 48 GPIO_ACTIVE_LOW>; + ti,x-min = /bits/ 16 <125>; + ti,x-max = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + ti,y-max = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + ti,debounce-max = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; +}; + +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&sdhci0 { + status = "okay"; + ti,driver-strength-ohm = <50>; + mmc-pwrseq = <&mmc_pwrseq>; + disable-wp; + bootph-all; +}; + +&sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>; + bus-width = <4>; + disable-wp; + non-removable; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + ti,fails-without-test-cd; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usbss1 { + ti,vbus-divider; +}; + +&mailbox0_cluster0 { + status = "okay"; + + mbox_r5_0: mbox-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + + mbox_mcu_r5_0: mbox-mcu-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mcu_r5fss0 { + status = "okay"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&wkup_r5fss0 { + status = "okay"; +}; + +&wkup_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_r5_0>; + memory-region = <&wkup_r5fss0_core0_dma_memory_region>, + <&wkup_r5fss0_core0_memory_region>; +}; + +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + +&mcu_gpio_intr { + status = "reserved"; +}; + +&wkup_rtc0 { + status = "disabled"; +}; + +&wkup_rti0 { + /* WKUP RTI0 is used by DM firmware */ + status = "reserved"; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; -- 2.43.0