[PATCH v11 6/8] arm64: dts: qcom: qcs6490-rb3gen2: Add PSCI SYSTEM_RESET2 types

[Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>]

From: Elliot Berman <elliot.berman@oss.qualcomm.com>

Add support for SYSTEM_RESET2 vendor-specific resets in
qcs6490-rb3gen2 as reboot-modes.  Describe the resets:
"bootloader" will cause device to reboot and stop in the
bootloader's fastboot mode. "edl" will cause device to reboot
into "emergency download mode", which permits loading images via
the Firehose protocol.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Elliot Berman <elliot.berman@oss.qualcomm.com>
Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 5fbcd48f2e2d839835fa464a8d5682f00557f82e..8cf289a3cfc4ac7014885494c27fb003a7258519 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -966,6 +966,13 @@ &pon_resin {
 	status = "okay";
 };
 
+&psci {
+	reboot-mode {
+		mode-bootloader = <0x10001 0x2>;
+		mode-edl = <0 0x1>;
+	};
+};
+
 &qup_uart7_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power

-- 
2.34.1