[PATCH v2 2/5] dt-bindings: iio: adc: add ade9000

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

Add devicetree bindings support for ade9000.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v2:
 - move interrup-names near interrupts
 - remove properties related to the waveform buffer and make them runtime attributes
 - remove egy-time property and make it a runtime attribute.
 - remove wf-src and use filter_type in the driver.
 - add vref, vdd support.
 - use adc standard channels instead of phase channels.
 .../bindings/iio/adc/adi,ade9000.yaml         | 122 ++++++++++++++++++
 1 file changed, 122 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
new file mode 100644
index 000000000000..0176252aae35
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ade9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADE9000 High Performance, Polyphase Energy Metering driver
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADE9000 s a highly accurate, fully integrated, multiphase energy and power
+  quality monitoring device. Superior analog performance and a digital signal
+  processing (DSP) core enable accurate energy monitoring over a wide dynamic
+  range. An integrated high end reference ensures low drift over temperature
+  with a combined drift of less than ±25 ppm/°C maximum for the entire channel
+  including a programmable gain amplifier (PGA) and an analog-to- digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ade9000
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: irq0
+      - const: irq1
+
+  reset-gpios:
+    description: |
+      Must be the device tree identifier of the RESET pin. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  vdd-supply: true
+
+  vref-supply: true
+
+patternProperties:
+  "^channel@[0-2]$":
+    $ref: /schemas/iio/adc/adc.yaml#
+    type: object
+
+    properties:
+      reg:
+        description: The channel number (0-2 for phases A, B, C)
+        minimum: 0
+        maximum: 2
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - interrupts
+  - interrupt-names
+  - vdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+          compatible = "adi,ade9000";
+          reg = <0>;
+          spi-max-frequency = <7000000>;
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+          interrupts = <2 IRQ_TYPE_EDGE_FALLING>, <3 IRQ_TYPE_EDGE_FALLING>;
+          interrupt-names = "irq0", "irq1";
+          interrupt-parent = <&gpio>;
+          vdd-supply = <&vdd_reg>;
+
+          channel@0 {
+            reg = <0>;
+          };
+          channel@1 {
+            reg = <1>;
+          };
+          channel@2 {
+            reg = <2>;
+          };
+      };
+    };
-- 
2.49.0