[PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add Glymur pinctrl bindings

[Pankaj Patil <pankaj.patil@oss.qualcomm.com>]

Add DeviceTree binding for Glymur SoC TLMM block

Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
---
Changes in v4:
Updated enum in bindings to line length of 80 char

Changes in v3:
Fixed indentation for example tlmm node

Changes in v2:
Updated gpio-line-names maxItems to 250
Fixed example node reg property
 .../bindings/pinctrl/qcom,glymur-tlmm.yaml    | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml
new file mode 100644
index 000000000000..38c360e77fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,glymur-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Glymur TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm Glymur SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,glymur-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 119
+
+  gpio-line-names:
+    maxItems: 250
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-glymur-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-glymur-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-glymur-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, RESOUT_GPIO_N, aoss_cti, asc_cci, atest_char, atest_usb,
+                audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk, cam_asc_mclk4,
+                cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
+                cmu_rng, cri_trng, dbg_out_clk, ddr_bist_complete,
+                ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi,
+                edp0_hot, edp0_lcd, edp1_lcd, egpio, eusb0_ac_en, eusb1_ac_en,
+                eusb2_ac_en, eusb3_ac_en, eusb5_ac_en, eusb6_ac_en, gcc_gp1,
+                gcc_gp2, gcc_gp3, host2wlan_sol, i2c0_s_scl, i2c0_s_sda,
+                i2s0_data, i2s0_sck, i2s0_ws, i2s1_data, i2s1_sck, i2s1_ws,
+                ibi_i3c, jitter_bist, mdp_vsync_out, mdp_vsync_e, mdp_vsync_p,
+                mdp_vsync_s, pcie3a_clk, pcie3a_rst_n, pcie3b_clk,
+                pcie4_clk_req_n, pcie5_clk_req_n, pcie6_clk_req_n, phase_flag,
+                pll_bist_sync, pll_clk_aux, pmc_oca_n, pmc_uva_n, prng_rosc,
+                qdss_cti, qdss_gpio, qspi, qup0_se0, qup0_se1, qup0_se2,
+                qup0_se3_l0, qup0_se3, qup0_se4, qup0_se5, qup0_se6, qup0_se7,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5,
+                qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3,
+                qup2_se4, qup2_se5, qup2_se6, qup2_se7, qup3_se0, qup3_se1,
+                sd_write_protect, sdc4_clk, sdc4_cmd, sdc4_data, smb_acok_n,
+                sys_throttle, tb_trig_sdc2, tb_trig_sdc4, tmess_prng,
+                tsense_pwm, tsense_therm, usb0_dp, usb0_phy_ps, usb0_sbrx,
+                usb0_sbtx, usb0_tmu, usb1_dbg, usb1_dp, usb1_phy_ps, usb1_sbrx,
+                usb1_sbtx, usb1_tmu, usb2_dp, usb2_phy_ps, usb2_sbrx, usb2_sbtx,
+                usb2_tmu, vsense_trigger_mirnat, wcn_sw, wcn_sw_ctrl ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,glymur-tlmm";
+        reg = <0x0f100000 0xf00000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 249>;
+        wakeup-parent = <&pdc>;
+        gpio-reserved-ranges = <4 4>, <10 2>, <33 3>, <44 4>;
+        qup_uart21_default: qup-uart21-default-state {
+            tx-pins {
+                pins = "gpio86";
+                function = "qup2_se5";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            rx-pins {
+                pins = "gpio87";
+                function = "qup2_se5";
+                drive-strength = <2>;
+                bias-disable;
+            };
+        };
+    };
+...
-- 
2.34.1