From: Herve Codina <herve.codina@bootlin.com>
To: Hoan Tran <hoan@os.amperecomputing.com>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Saravana Kannan <saravanak@google.com>,
Serge Semin <fancer.lancer@gmail.com>,
Herve Codina <herve.codina@bootlin.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Miquel Raynal <miquel.raynal@bootlin.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH 2/6] ARM: dts: r9a06g032: Add GPIO controllers
Date: Fri, 25 Jul 2025 17:26:11 +0200 [thread overview]
Message-ID: <20250725152618.32886-3-herve.codina@bootlin.com> (raw)
In-Reply-To: <20250725152618.32886-1-herve.codina@bootlin.com>
Add GPIO controllers (Synosys DesignWare IPs) available in the
r9a06g032 (RZ/N1D) SoC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
arch/arm/boot/dts/renesas/r9a06g032.dtsi | 127 +++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 80ad1fdc77a0..7f71c01af409 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -499,6 +499,133 @@ gic: interrupt-controller@44101000 {
<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ /*
+ * The GPIO mapping to the corresponding pins is not obvious.
+ * See the hardware documentation for details.
+ */
+ gpio0: gpio@5000b000 {
+ compatible = "renesas,r9a06g032-gpio", "renesas,rzn1-gpio", "snps,dw-apb-gpio";
+ reg = <0x5000b000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sysctrl R9A06G032_HCLK_GPIO0>;
+ clock-names = "bus";
+ status = "disabled";
+
+ /* GPIO0a[0] connected to pin GPIO0 */
+ /* GPIO0a[1..2] connected to pins GPIO3..4 */
+ /* GPIO0a[3..4] connected to pins GPIO9..10 */
+ /* GPIO0a[5] connected to pin GPIO12 */
+ /* GPIO0a[6..7] connected to pins GPIO15..16 */
+ /* GPIO0a[8..9] connected to pins GPIO21..22 */
+ /* GPIO0a[10] connected to pin GPIO24 */
+ /* GPIO0a[11..12] connected to pins GPIO27..28 */
+ /* GPIO0a[13..14] connected to pins GPIO33..34 */
+ /* GPIO0a[15] connected to pin GPIO36 */
+ /* GPIO0a[16..17] connected to pins GPIO39..40 */
+ /* GPIO0a[18..19] connected to pins GPIO45..46 */
+ /* GPIO0a[20] connected to pin GPIO48 */
+ /* GPIO0a[21..22] connected to pins GPIO51..52 */
+ /* GPIO0a[23..24] connected to pins GPIO57..58 */
+ /* GPIO0a[25..31] connected to pins GPIO62..68 */
+ gpio0a: gpio@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio0a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+
+ /* GPIO0b[0..1] connected to pins GPIO1..2 */
+ /* GPIO0b[2..5] connected to pins GPIO5..8 */
+ /* GPIO0b[6] connected to pin GPIO11 */
+ /* GPIO0b[7..8] connected to pins GPIO13..14 */
+ /* GPIO0b[9..12] connected to pins GPIO17..20 */
+ /* GPIO0b[13] connected to pin GPIO23 */
+ /* GPIO0b[14..15] connected to pins GPIO25..26 */
+ /* GPIO0b[16..19] connected to pins GPIO29..32 */
+ /* GPIO0b[20] connected to pin GPIO35 */
+ /* GPIO0b[21..22] connected to pins GPIO37..38 */
+ /* GPIO0b[23..26] connected to pins GPIO41..44 */
+ /* GPIO0b[27] connected to pin GPIO47 */
+ /* GPIO0b[28..29] connected to pins GPIO49..50 */
+ /* GPIO0b[30..31] connected to pins GPIO53..54 */
+ gpio0b: gpio@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio0b";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <1>;
+ };
+ };
+
+ gpio1: gpio@5000c000 {
+ compatible = "renesas,r9a06g032-gpio", "renesas,rzn1-gpio", "snps,dw-apb-gpio";
+ reg = <0x5000c000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sysctrl R9A06G032_HCLK_GPIO1>;
+ clock-names = "bus";
+ status = "disabled";
+
+ /* GPIO1a[0..4] connected to pins GPIO69..73 */
+ /* GPIO1a[5..31] connected to pins GPIO95..121 */
+ gpio1a: gpio@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio1a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+
+ /* GPIO1b[0..1] connected to pins GPIO55..56 */
+ /* GPIO1b[2..4] connected to pins GPIO59..61 */
+ /* GPIO1b[5..25] connected to pins GPIO74..94 */
+ /* GPIO1b[26..31] connected to pins GPIO150..155 */
+ gpio1b: gpio@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio1b";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <1>;
+ };
+ };
+
+ gpio2: gpio@5000d000 {
+ compatible = "renesas,r9a06g032-gpio", "renesas,rzn1-gpio", "snps,dw-apb-gpio";
+ reg = <0x5000d000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sysctrl R9A06G032_HCLK_GPIO2>;
+ clock-names = "bus";
+ status = "disabled";
+
+ /* GPIO2a[0..27] connected to pins GPIO122..149 */
+ /* GPIO2a[28..31] connected to pins GPIO156..159 */
+ gpio2a: gpio@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio2a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+
+ /* GPIO2b[0..9] connected to pins GPIO160..169 */
+ gpio2b: gpio@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "gpio2b";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <10>;
+ reg = <1>;
+ };
+ };
+
can0: can@52104000 {
compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
reg = <0x52104000 0x800>;
--
2.50.1
next prev parent reply other threads:[~2025-07-25 15:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-25 15:26 [PATCH 0/6] gpio: renesas: Add support for GPIO and related interrupts in RZ/N1 SoC Herve Codina
2025-07-25 15:26 ` [PATCH 1/6] dt-bindings: gpio: snps,dw-apb: Add support for Renesas RZ/N1 Herve Codina
2025-07-29 18:11 ` Rob Herring
2025-07-30 9:17 ` Herve Codina
2025-07-25 15:26 ` Herve Codina [this message]
2025-07-25 15:26 ` [PATCH 3/6] dt-bindings: soc: renesas: Add the Renesas RZ/N1 GPIO Interrupt Multiplexer Herve Codina
2025-07-25 15:26 ` [PATCH 4/6] of/irq: Introduce of_irq_foreach_imap Herve Codina
2025-07-29 19:51 ` Rob Herring
2025-07-30 9:43 ` Herve Codina
2025-07-25 15:26 ` [PATCH 5/6] soc: renesas: Add support for Renesas RZ/N1 GPIO Interrupt Multiplexer Herve Codina
2025-07-29 19:51 ` Rob Herring
2025-07-30 9:54 ` Herve Codina
2025-07-30 20:47 ` Rob Herring
2025-08-01 9:17 ` Herve Codina
2025-07-25 15:26 ` [PATCH 6/6] ARM: dts: r9a06g032: Add support for GPIO interrupts Herve Codina
2025-07-25 20:17 ` [PATCH 0/6] gpio: renesas: Add support for GPIO and related interrupts in RZ/N1 SoC Rob Herring (Arm)
2025-07-27 11:01 ` Wolfram Sang
2025-07-30 8:10 ` Herve Codina
2025-08-06 18:51 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250725152618.32886-3-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=geert+renesas@glider.be \
--cc=hoan@os.amperecomputing.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=phil.edworthy@renesas.com \
--cc=robh@kernel.org \
--cc=saravanak@google.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).