[PATCH v2 0/3] Add panels used by Asus Zenbook A14

[Aleksandrs Vinarskis <alex.vinarskis@gmail.com>]

Add x3 panels used by the abovementined device. The laptop comes in
two variants

* UX3407RA, higher end, FHD+ OLED or WOXGA+ OLED panels
* UX3407QA, lower end, FHD+ OLED or FHD+ LCD panels

At last all three variants were succeffully tested. Device-tree change
to take advantage of Samsung driver for OLED panels [1] will come later
via separate series once this one lands to linux-next.


[1] https://github.com/alexVinarskis/linux-x1e80100-zenbook-a14/blob/master/0007-arm64-dts-qcom-Rework-X1-based-Asus-Zenbook-A14-s-di.patch


Changes in v2:
* Replaced guesstimate of delay_200_500_e50_p2e80 with more
  conservative delay_200_500_e200 as per Doug
* Picked Ack-by from Krzysztof
Link to v1: https://lore.kernel.org/all/20250727165846.38186-1-alex.vinarskis@gmail.com/

Aleksandrs Vinarskis (3):
  dt-bindings: display: panel: samsung,atna40cu11: document ATNA40CU11
  dt-bindings: display: panel: samsung,atna40ct06: document ATNA40CT06
  drm/panel-edp: Add BOE NV140WUM-N64

 .../devicetree/bindings/display/panel/samsung,atna33xc20.yaml | 4 ++++
 drivers/gpu/drm/panel/panel-edp.c                             | 1 +
 2 files changed, 5 insertions(+)

-- 
2.48.1