[PATCH v5 10/11] dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support

[Jonas Jelonek <jelonek.jonas@gmail.com>]

Adjust the regex for child-node address to account for the fact that
RTL9310 supports 12 instead of only 8 SDA lines. Also, narrow this per
variant.

Add a vendor-specific property to explicitly specify the
Realtek-internal ID of the defined I2C controller/master. This is
required, in particular for RTL9310, to describe the correct I2C
master. Require this property for RTL9310.

Add compatibles for known SoC variants RTL9311, RTL9312 and RTL9313.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
---
 .../bindings/i2c/realtek,rtl9301-i2c.yaml     | 39 ++++++++++++++++++-
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
index 274e2ab8b612..17ce39c19ab1 100644
--- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -13,6 +13,8 @@ description:
   RTL9300 SoCs have two I2C controllers. Each of these has an SCL line (which
   if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be
   assigned to either I2C controller.
+  RTL9310 SoCs have equal capabilities but support 12 common SDA lines which
+  can be assigned to either I2C controller.
 
 properties:
   compatible:
@@ -23,7 +25,15 @@ properties:
               - realtek,rtl9302c-i2c
               - realtek,rtl9303-i2c
           - const: realtek,rtl9301-i2c
-      - const: realtek,rtl9301-i2c
+      - items:
+          - enum:
+              - realtek,rtl9311-i2c
+              - realtek,rtl9312-i2c
+              - realtek,rtl9313-i2c
+          - const: realtek,rtl9310-i2c
+      - enum:
+          - realtek,rtl9301-i2c
+          - realtek,rtl9310-i2c
 
   reg:
     items:
@@ -35,8 +45,14 @@ properties:
   "#size-cells":
     const: 0
 
+  realtek,scl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SCL line number of this I2C controller.
+    enum: [ 0, 1 ]
+
 patternProperties:
-  '^i2c@[0-7]$':
+  '^i2c@[0-9ab]$':
     $ref: /schemas/i2c/i2c-controller.yaml
     unevaluatedProperties: false
 
@@ -48,6 +64,25 @@ patternProperties:
     required:
       - reg
 
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9310-i2c
+    then:
+      required:
+        - realtek,scl
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9301-i2c
+    then:
+      patternProperties:
+        '^i2c@[89ab]$': false
+
 required:
   - compatible
   - reg
-- 
2.48.1