devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/2] Add the s32g2 and s32g3 FTM PWM support
@ 2025-08-11 22:30 Daniel Lezcano
  2025-08-11 22:30 ` [PATCH v2 1/2] dt: bindings: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3 Daniel Lezcano
  2025-08-11 22:30 ` [PATCH v2 2/2] pwm: Add the S32G support in the Freescale FTM driver Daniel Lezcano
  0 siblings, 2 replies; 5+ messages in thread
From: Daniel Lezcano @ 2025-08-11 22:30 UTC (permalink / raw)
  To: ukleinek, robh, krzk+dt, conor+dt, Frank.Li
  Cc: linux-pwm, devicetree, linux-kernel, Ghennadi.Procopciuc, s32

The NXP Automotive platform s32g2 and s32g3 have on their board a
FlexTimer (FTM) dedicated for the PWM. The same IP is found on the
Freescale Vybrid Family and the i.MX8 SoCs. However, there is a small
difference with some registers not available on the s32g2/3 and 6
channels instead of 8.

These two patches provide the DT bindings for the s32g2/3 compatible
strings and the code to deal with the FTM difference.

Changelog:
	v2:
	 - Merged the two booleans for the regmap holes check
	 - Clarified why this is needed in the changelog
	v1:
	 - Initial post

Daniel Lezcano (1):
  dt: bindings: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3

Ghennadi Procopciuc (1):
  pwm: Add the S32G support in the Freescale FTM driver

 .../bindings/pwm/fsl,vf610-ftm-pwm.yaml       | 11 ++++--
 drivers/pwm/pwm-fsl-ftm.c                     | 35 +++++++++++++++++--
 2 files changed, 41 insertions(+), 5 deletions(-)

-- 
2.43.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2025-08-12 10:28 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-11 22:30 [PATCH v2 0/2] Add the s32g2 and s32g3 FTM PWM support Daniel Lezcano
2025-08-11 22:30 ` [PATCH v2 1/2] dt: bindings: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3 Daniel Lezcano
2025-08-12  9:03   ` Krzysztof Kozlowski
2025-08-12 10:28     ` Daniel Lezcano
2025-08-11 22:30 ` [PATCH v2 2/2] pwm: Add the S32G support in the Freescale FTM driver Daniel Lezcano

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).