devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: hans.zhang@cixtech.com
To: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
	mani@kernel.org, robh@kernel.org, kwilczynski@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: mpillai@cadence.com, fugang.duan@cixtech.com,
	guoyin.chen@cixtech.com, peter.chen@cixtech.com,
	cix-kernel-upstream@cixtech.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Hans Zhang <hans.zhang@cixtech.com>
Subject: [PATCH v7 10/13] PCI: sky1: Add PCIe host support for CIX Sky1
Date: Wed, 13 Aug 2025 12:23:28 +0800	[thread overview]
Message-ID: <20250813042331.1258272-11-hans.zhang@cixtech.com> (raw)
In-Reply-To: <20250813042331.1258272-1-hans.zhang@cixtech.com>

From: Hans Zhang <hans.zhang@cixtech.com>

Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based
on the Cadence PCIe core.

Supports MSI/MSI-x via GICv3, Single Virtual Channel, Single Function.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
---
 drivers/pci/controller/cadence/Kconfig    |  13 +
 drivers/pci/controller/cadence/Makefile   |   1 +
 drivers/pci/controller/cadence/pci-sky1.c | 294 ++++++++++++++++++++++
 3 files changed, 308 insertions(+)
 create mode 100644 drivers/pci/controller/cadence/pci-sky1.c

diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
index 117677a23d68..1716b7300fa1 100644
--- a/drivers/pci/controller/cadence/Kconfig
+++ b/drivers/pci/controller/cadence/Kconfig
@@ -67,4 +67,17 @@ config PCI_J721E_EP
 	  Say Y here if you want to support the TI J721E PCIe platform
 	  controller in endpoint mode. TI J721E PCIe controller uses Cadence PCIe
 	  core.
+
+config PCI_SKY1_HOST
+	tristate "CIX SKY1 PCIe controller (host mode)"
+	depends on OF
+	select PCIE_CADENCE_HOST
+	select PCI_ECAM
+	help
+	  Say Y here if you want to support the CIX SKY1 PCIe platform
+	  controller in host mode. CIX SKY1 PCIe controller uses Cadence HPA(High
+	  Performance Architecture IP[Second generation of cadence PCIe IP])
+
+	  This driver requires Cadence PCIe core infrastructure (PCIE_CADENCE_HOST)
+	  and hardware platform adaptation layer to function.
 endmenu
diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
index de4ddae7aca4..40d7c6e98b4d 100644
--- a/drivers/pci/controller/cadence/Makefile
+++ b/drivers/pci/controller/cadence/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host-mod.o
 obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep-mod.o
 obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
 obj-$(CONFIG_PCI_J721E) += pci-j721e.o
+obj-$(CONFIG_PCI_SKY1_HOST) += pci-sky1.o
diff --git a/drivers/pci/controller/cadence/pci-sky1.c b/drivers/pci/controller/cadence/pci-sky1.c
new file mode 100644
index 000000000000..36267d0bb5b6
--- /dev/null
+++ b/drivers/pci/controller/cadence/pci-sky1.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe controller driver for CIX's sky1 SoCs
+ *
+ * Author: Hans Zhang <hans.zhang@cixtech.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/pci_ids.h>
+
+#include "pcie-cadence.h"
+#include "pcie-cadence-host-common.h"
+
+#define STRAP_REG(n) ((n) * 0x04)
+#define STATUS_REG(n) ((n) * 0x04)
+
+#define RCSU_STRAP_REG 0x300
+#define RCSU_STATUS_REG 0x400
+
+#define SKY1_IP_REG_BANK_OFFSET 0x1000
+#define SKY1_IP_CFG_CTRL_REG_BANK_OFFSET 0x4c00
+#define SKY1_IP_AXI_MASTER_COMMON_OFFSET 0xf000
+#define SKY1_AXI_SLAVE_OFFSET 0x9000
+#define SKY1_AXI_MASTER_OFFSET 0xb000
+#define SKY1_AXI_HLS_REGISTERS_OFFSET 0xc000
+#define SKY1_AXI_RAS_REGISTERS_OFFSET 0xe000
+#define SKY1_DTI_REGISTERS_OFFSET 0xd000
+
+#define IP_REG_I_DBG_STS_0 0x420
+
+#define LINK_TRAINING_ENABLE BIT(0)
+#define LINK_COMPLETE BIT(0)
+
+enum cix_soc_type {
+	CIX_SKY1,
+};
+
+struct sky1_pcie_data {
+	struct cdns_plat_pcie_of_data reg_off;
+	enum cix_soc_type soc_type;
+};
+
+struct sky1_pcie {
+	struct device *dev;
+	const struct sky1_pcie_data *data;
+	struct cdns_pcie *cdns_pcie;
+	struct cdns_pcie_rc *cdns_pcie_rc;
+
+	struct resource *cfg_res;
+	struct resource *msg_res;
+	struct pci_config_window *cfg;
+	void __iomem *rcsu_base;
+	void __iomem *strap_base;
+	void __iomem *status_base;
+	void __iomem *reg_base;
+	void __iomem *cfg_base;
+	void __iomem *msg_base;
+};
+
+static void sky1_pcie_clear_and_set_dword(void __iomem *addr, u32 clear,
+					  u32 set)
+{
+	u32 val;
+
+	val = readl(addr);
+	val &= ~clear;
+	val |= set;
+	writel(val, addr);
+}
+
+static void sky1_pcie_init_bases(struct sky1_pcie *pcie)
+{
+	pcie->strap_base = pcie->rcsu_base + RCSU_STRAP_REG;
+	pcie->status_base = pcie->rcsu_base + RCSU_STATUS_REG;
+}
+
+static int sky1_pcie_parse_mem(struct sky1_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	void __iomem *base;
+	int ret = 0;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "reg");
+	if (IS_ERR(base)) {
+		dev_err(dev, "Parse \"reg\" resource err\n");
+		return PTR_ERR(base);
+	}
+	pcie->reg_base = base;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+	if (!res) {
+		dev_err(dev, "Parse \"cfg\" resource err\n");
+		return -ENXIO;
+	}
+	pcie->cfg_res = res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rcsu");
+	if (!res) {
+		dev_err(dev, "Parse \"rcsu\" resource err\n");
+		return -ENXIO;
+	}
+	pcie->rcsu_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pcie->rcsu_base) {
+		dev_err(dev, "ioremap failed for resource %pR\n", res);
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "msg");
+	if (!res) {
+		dev_err(dev, "Parse \"msg\" resource err\n");
+		return -ENXIO;
+	}
+	pcie->msg_res = res;
+	pcie->msg_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pcie->msg_base) {
+		dev_err(dev, "ioremap failed for resource %pR\n", res);
+		return -ENOMEM;
+	}
+
+	return ret;
+}
+
+static int sky1_pcie_parse_property(struct platform_device *pdev,
+				    struct sky1_pcie *pcie)
+{
+	int ret = 0;
+
+	ret = sky1_pcie_parse_mem(pcie);
+	if (ret < 0)
+		return ret;
+
+	sky1_pcie_init_bases(pcie);
+
+	return ret;
+}
+
+static int sky1_pcie_start_link(struct cdns_pcie *cdns_pcie)
+{
+	struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+
+	sky1_pcie_clear_and_set_dword(pcie->strap_base + STRAP_REG(1),
+				      0, LINK_TRAINING_ENABLE);
+
+	return 0;
+}
+
+static void sky1_pcie_stop_link(struct cdns_pcie *cdns_pcie)
+{
+	struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+
+	sky1_pcie_clear_and_set_dword(pcie->strap_base + STRAP_REG(1),
+				      LINK_TRAINING_ENABLE, 0);
+}
+
+
+static bool sky1_pcie_link_up(struct cdns_pcie *cdns_pcie)
+{
+	u32 val;
+
+	val = cdns_pcie_hpa_readl(cdns_pcie, REG_BANK_IP_REG,
+				  IP_REG_I_DBG_STS_0);
+	return val & LINK_COMPLETE;
+}
+
+static const struct cdns_pcie_ops sky1_pcie_ops = {
+	.start_link = sky1_pcie_start_link,
+	.stop_link = sky1_pcie_stop_link,
+	.link_up = sky1_pcie_link_up,
+};
+
+static int sky1_pcie_probe(struct platform_device *pdev)
+{
+	const struct sky1_pcie_data *data;
+	struct device *dev = &pdev->dev;
+	struct pci_host_bridge *bridge;
+	struct cdns_pcie *cdns_pcie;
+	struct resource_entry *bus;
+	struct cdns_pcie_rc *rc;
+	struct sky1_pcie *pcie;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	pcie->data = data;
+	pcie->dev = dev;
+	dev_set_drvdata(dev, pcie);
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
+	if (!bridge)
+		return -ENOMEM;
+
+	bus = resource_list_first_type(&bridge->windows, IORESOURCE_BUS);
+	if (!bus)
+		return -ENODEV;
+
+	ret = sky1_pcie_parse_property(pdev, pcie);
+	if (ret < 0)
+		return -ENXIO;
+
+	pcie->cfg = pci_ecam_create(dev, pcie->cfg_res, bus->res,
+				    &pci_generic_ecam_ops);
+	if (IS_ERR(pcie->cfg))
+		return PTR_ERR(pcie->cfg);
+
+	bridge->ops = (struct pci_ops *)&pci_generic_ecam_ops.pci_ops;
+	rc = pci_host_bridge_priv(bridge);
+	rc->ecam_support_flag = 1;
+	rc->cfg_base = pcie->cfg->win;
+	rc->cfg_res = &pcie->cfg->res;
+
+	cdns_pcie = &rc->pcie;
+	cdns_pcie->dev = dev;
+	cdns_pcie->ops = &sky1_pcie_ops;
+	cdns_pcie->reg_base = pcie->reg_base;
+	cdns_pcie->msg_res = pcie->msg_res;
+	cdns_pcie->cdns_pcie_reg_offsets = &data->reg_off;
+	cdns_pcie->is_rc = data->reg_off.is_rc;
+
+	pcie->cdns_pcie = cdns_pcie;
+	pcie->cdns_pcie_rc = rc;
+	pcie->cfg_base = rc->cfg_base;
+	bridge->sysdata = pcie->cfg;
+
+	if (data->soc_type == CIX_SKY1) {
+		rc->vendor_id = PCI_VENDOR_ID_CIX;
+		rc->device_id = PCI_DEVICE_ID_CIX_SKY1;
+		rc->no_inbound_flag = 1;
+	}
+
+	ret = cdns_pcie_hpa_host_setup(rc);
+	if (ret < 0) {
+		pci_ecam_free(pcie->cfg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct sky1_pcie_data sky1_pcie_rc_data = {
+	.reg_off = {
+		.is_rc = true,
+		.ip_reg_bank_offset = SKY1_IP_REG_BANK_OFFSET,
+		.ip_cfg_ctrl_reg_offset = SKY1_IP_CFG_CTRL_REG_BANK_OFFSET,
+		.axi_mstr_common_offset = SKY1_IP_AXI_MASTER_COMMON_OFFSET,
+		.axi_slave_offset = SKY1_AXI_SLAVE_OFFSET,
+		.axi_master_offset = SKY1_AXI_MASTER_OFFSET,
+		.axi_hls_offset = SKY1_AXI_HLS_REGISTERS_OFFSET,
+		.axi_ras_offset = SKY1_AXI_RAS_REGISTERS_OFFSET,
+		.axi_dti_offset = SKY1_DTI_REGISTERS_OFFSET,
+	},
+	.soc_type = CIX_SKY1,
+};
+
+static const struct of_device_id of_sky1_pcie_match[] = {
+	{
+		.compatible = "cix,sky1-pcie-host",
+		.data = &sky1_pcie_rc_data,
+	},
+	{},
+};
+
+static void sky1_pcie_remove(struct platform_device *pdev)
+{
+	struct sky1_pcie *pcie = platform_get_drvdata(pdev);
+
+	pci_ecam_free(pcie->cfg);
+}
+
+static struct platform_driver sky1_pcie_driver = {
+	.probe  = sky1_pcie_probe,
+	.remove = sky1_pcie_remove,
+	.driver = {
+		.name = "sky1-pcie",
+		.of_match_table = of_sky1_pcie_match,
+	},
+};
+module_platform_driver(sky1_pcie_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCIe controller driver for CIX's sky1 SoCs");
+MODULE_AUTHOR("Hans Zhang <hans.zhang@cixtech.com>");
-- 
2.49.0


  parent reply	other threads:[~2025-08-13  4:27 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-13  4:23 [PATCH v7 00/13] Enhance the PCIe controller driver for next generation controllers hans.zhang
2025-08-13  4:23 ` [PATCH v7 01/13] PCI: cadence: Add support for modules for cadence controller builds hans.zhang
2025-08-14 21:25   ` Bjorn Helgaas
2025-08-13  4:23 ` [PATCH v7 02/13] PCI: cadence: Split PCIe controller header file hans.zhang
2025-08-14 21:16   ` Bjorn Helgaas
2025-08-18  2:01     ` Manikandan Karunakaran Pillai
2025-08-13  4:23 ` [PATCH v7 03/13] PCI: cadence: Add register definitions for HPA(High Perf Architecture) hans.zhang
2025-08-13 19:17   ` Krzysztof Kozlowski
2025-08-14  1:29     ` Manikandan Karunakaran Pillai
2025-08-14 21:35   ` Bjorn Helgaas
2025-08-13  4:23 ` [PATCH v7 04/13] PCI: cadence: Split PCIe EP support into common and specific functions hans.zhang
2025-08-14 21:41   ` Bjorn Helgaas
2025-08-13  4:23 ` [PATCH v7 05/13] PCI: cadence: Split PCIe RP " hans.zhang
2025-08-14 21:48   ` Bjorn Helgaas
2025-08-13  4:23 ` [PATCH v7 06/13] PCI: cadence: Split the common functions for PCIe controller support hans.zhang
2025-08-13  4:23 ` [PATCH v7 07/13] PCI: cadence: Add support for High Performance Arch(HPA) controller hans.zhang
2025-08-14 22:14   ` Bjorn Helgaas
2025-08-13  4:23 ` [PATCH v7 08/13] dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings hans.zhang
2025-08-13  8:31   ` Rob Herring (Arm)
2025-08-13  9:12     ` Hans Zhang
2025-08-13 15:43       ` Rob Herring
2025-08-14  1:22         ` Hans Zhang
2025-08-13 19:08       ` Krzysztof Kozlowski
2025-08-14  1:26         ` Hans Zhang
2025-08-13 15:44   ` Rob Herring
2025-08-14  1:23     ` Hans Zhang
2025-08-13  4:23 ` [PATCH v7 09/13] PCI: Add Cix Technology Vendor and Device ID hans.zhang
2025-08-14 22:23   ` Bjorn Helgaas
2025-08-15  3:32     ` Peter Chen
2025-08-15 14:27       ` Bjorn Helgaas
2025-08-13  4:23 ` hans.zhang [this message]
2025-08-13 19:16   ` [PATCH v7 10/13] PCI: sky1: Add PCIe host support for CIX Sky1 Krzysztof Kozlowski
2025-08-14  1:29     ` Hans Zhang
2025-08-14 22:46   ` Bjorn Helgaas
2025-08-15  7:53     ` Hans Zhang
2025-08-13  4:23 ` [PATCH v7 11/13] MAINTAINERS: add entry for CIX Sky1 PCIe driver hans.zhang
2025-08-13  4:23 ` [PATCH v7 12/13] arm64: dts: cix: Add PCIe Root Complex on sky1 hans.zhang
2025-08-13  4:23 ` [PATCH v7 13/13] arm64: dts: cix: Enable PCIe on the Orion O6 board hans.zhang
2025-08-13 19:14 ` [PATCH v7 00/13] Enhance the PCIe controller driver for next generation controllers Krzysztof Kozlowski
2025-08-14  1:37   ` Hans Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250813042331.1258272-11-hans.zhang@cixtech.com \
    --to=hans.zhang@cixtech.com \
    --cc=bhelgaas@google.com \
    --cc=cix-kernel-upstream@cixtech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fugang.duan@cixtech.com \
    --cc=guoyin.chen@cixtech.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=mpillai@cadence.com \
    --cc=peter.chen@cixtech.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).