devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vikram Sharma <quic_vikramsa@quicinc.com>
To: <rfoss@kernel.org>, <todor.too@gmail.com>,
	<bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<andersson@kernel.org>, <konradybcio@kernel.org>,
	<hverkuil-cisco@xs4all.nl>, <cros-qcom-dts-watchers@chromium.org>,
	<catalin.marinas@arm.com>, <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<quic_vikramsa@quicinc.com>, <linux-media@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 3/7] media: qcom: camss: Add CSIPHY support for QCS8300
Date: Wed, 13 Aug 2025 11:07:20 +0530	[thread overview]
Message-ID: <20250813053724.232494-4-quic_vikramsa@quicinc.com> (raw)
In-Reply-To: <20250813053724.232494-1-quic_vikramsa@quicinc.com>

QCS8300 uses the same CSIPHY hardware version (v1.3.0) as
SA8775P. The only difference between the two platforms is
the number of CSIPHY instances: SA8775P has four, while
QCS8300 has three.

Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
 .../qcom/camss/camss-csiphy-3ph-1-0.c         |  2 +
 drivers/media/platform/qcom/camss/camss.c     | 57 +++++++++++++++++++
 2 files changed, 59 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index a610504359d0..445f4d41e847 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -826,6 +826,7 @@ static bool csiphy_is_gen2(u32 version)
 	case CAMSS_7280:
 	case CAMSS_8250:
 	case CAMSS_8280XP:
+	case CAMSS_8300:
 	case CAMSS_845:
 	case CAMSS_8550:
 	case CAMSS_8775P:
@@ -928,6 +929,7 @@ static int csiphy_init(struct csiphy_device *csiphy)
 		regs->lane_array_size = ARRAY_SIZE(lane_regs_sm8550);
 		regs->offset = 0x1000;
 		break;
+	case CAMSS_8300:
 	case CAMSS_8775P:
 		regs->lane_regs = &lane_regs_sa8775p[0];
 		regs->lane_array_size = ARRAY_SIZE(lane_regs_sa8775p);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 6b9aba1029b5..410e188d26aa 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -2483,6 +2483,63 @@ static const struct resources_icc icc_res_sm8550[] = {
 	},
 };
 
+static const struct camss_subdev_resources csiphy_res_8300[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+
+		.clock = { "csiphy_rx", "csiphy0", "csiphy0_timer" },
+		.clock_rate = {
+			{ 400000000 },
+			{ 0 },
+			{ 400000000 },
+		},
+		.reg = { "csiphy0" },
+		.interrupt = { "csiphy0" },
+		.csiphy = {
+			.id = 0,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845,
+		}
+	},
+	/* CSIPHY1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+
+		.clock = { "csiphy_rx", "csiphy1", "csiphy1_timer" },
+		.clock_rate = {
+			{ 400000000 },
+			{ 0 },
+			{ 400000000 },
+		},
+		.reg = { "csiphy1" },
+		.interrupt = { "csiphy1" },
+		.csiphy = {
+			.id = 1,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845,
+		}
+	},
+	/* CSIPHY2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+
+		.clock = { "csiphy_rx", "csiphy2", "csiphy2_timer" },
+		.clock_rate = {
+			{ 400000000 },
+			{ 0 },
+			{ 400000000 },
+		},
+		.reg = { "csiphy2" },
+		.interrupt = { "csiphy2" },
+		.csiphy = {
+			.id = 2,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845,
+		}
+	},
+};
+
 static const struct camss_subdev_resources csiphy_res_8775p[] = {
 	/* CSIPHY0 */
 	{
-- 
2.25.1


  parent reply	other threads:[~2025-08-13  5:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-13  5:37 [PATCH v3 0/7] qcom: qcs8300: Add qcs8300 camss support Vikram Sharma
2025-08-13  5:37 ` [PATCH v3 1/7] media: dt-bindings: Add qcom,qcs8300-camss compatible Vikram Sharma
2025-08-13 21:31   ` Bryan O'Donoghue
2025-08-13  5:37 ` [PATCH v3 2/7] media: qcom: camss: Add qcs8300 compatible Vikram Sharma
2025-08-13  5:37 ` Vikram Sharma [this message]
2025-08-13 21:32   ` [PATCH v3 3/7] media: qcom: camss: Add CSIPHY support for QCS8300 Bryan O'Donoghue
2025-08-13  5:37 ` [PATCH v3 4/7] media: qcom: camss: enable csid 690 for qcs8300 Vikram Sharma
2025-08-13 21:33   ` Bryan O'Donoghue
2025-08-14  6:54     ` Vikram Sharma
2025-08-13  5:37 ` [PATCH v3 5/7] media: qcom: camss: enable vfe " Vikram Sharma
2025-08-13 21:35   ` Bryan O'Donoghue
2025-08-13  5:37 ` [PATCH v3 6/7] media: qcom: camss: Enumerate resources for QCS8300 Vikram Sharma
2025-08-13  5:37 ` [PATCH v3 7/7] arm64: dts: qcom: qcs8300: Add support for camss Vikram Sharma
2025-08-13 21:37   ` Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250813053724.232494-4-quic_vikramsa@quicinc.com \
    --to=quic_vikramsa@quicinc.com \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=cros-qcom-dts-watchers@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=todor.too@gmail.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).