From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CD60F27280A for ; Thu, 14 Aug 2025 07:28:08 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.168.131 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1755156490; cv=none; b=j81p0m2Ig+9w5pol5KBG3hcP7VRLmPZihOCRpIh/35Lup5rIoBC2KgJM575Jo2r438ZFTOpKyaBhC80GMqTsP0kvSY22X2+vZWqPHdpjr2sFEbr5leoxd5iKasAh2kAPitYP/NkB9+PLEe90mUtHOUQypdVh3JXPK6xBbf1sSQA= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1755156490; c=relaxed/simple; bh=S+PRcLshjcevgFFkRmnpF2ebfw+1GgiwYl5B8VOawtQ=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=csX42bKauedUtergYR2jDEKBV8AMSo5AUKNOXXo+IV35Rte+cp/RWq+hsJdUTlt6OE2Hpex9QVbVmCJsIh6jGIR4wYRAKM4pjaT56S9IM4AYjVrX243DcAO4JEcUzjKy21bLf3hw9j3E6wiuYjA3tMyW9lmPxddRd/7Nw0ma484= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b=dLhP0LZe; arc=none smtp.client-ip=205.220.168.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=qualcomm.com header.i=@qualcomm.com header.b="dLhP0LZe" Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 57DNaRQL027068 for ; Thu, 14 Aug 2025 07:28:08 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= 4Mswsq8+eoGuA8MFTXl5LAFupnoA8a68rlTu6GUbowY=; b=dLhP0LZefwBKz0RA jOf3tk+ituvfCkMuYbLR9aVvTkFcivTxfcGpPb2sHADOLgnRn2D+NFr0hPwff2Fi 8JkUC9i2IMWHzztZIo4RtIk543E1HnYawLlR0bvBVmcw7gOHen4x3RwDJku8h1bM s5pvo/xl9vyP3YT55aRRLK9KxcIUzbGxz/eWuXr/4skKlYIwx9Jc0rN488eaXJPw Ckgvm6/bh2t8ni/XerqpScGqE7EVcIQCgKQ8pHY6IBJS8cchcz6VgjHxup4oXnVN UgFX1QkCNn++RELgdnn1Ia9vr8ZZ7YRbjZFctMFzTqygNjbigbdROv/sQ9M61Nf4 rGXZFg== Received: from mail-pg1-f200.google.com (mail-pg1-f200.google.com [209.85.215.200]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 48dy3gepkk-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Thu, 14 Aug 2025 07:28:08 +0000 (GMT) Received: by mail-pg1-f200.google.com with SMTP id 41be03b00d2f7-b47174c65b0so1021071a12.2 for ; Thu, 14 Aug 2025 00:28:07 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1755156487; x=1755761287; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=4Mswsq8+eoGuA8MFTXl5LAFupnoA8a68rlTu6GUbowY=; b=OAT1eJ3Bex1l06pxf3Zsp8UKRHRT2fAYAL0MhfY8b63LpgUi+oSZSjvMZ0kwYzx4SR nJ7/NxdLCAeeKDFHU9K7D9NmfBlyjz/uoptB99MUDzcTadqgqMvq1F/1h+YwZ7ffEdUm GtK8KZwRwTXPa/xRkuYQaDRWOoxMcRhVmrsc5JoE2bulm9Lr8ZPWnP1tVknqq1rbaaoW CXrLXgcGcp7SgsxQryBedDt9gaccJ5Ml40syP4Ms8H5OT+0KCfRPQZAjFPme4m+x4Pcz ZHUI23aC6I6bizoBI+OTJGSesmpssvnTozMR/B0qfLHbKsTPbXRnjiqOqk+6L4S/FZgC PcHw== X-Forwarded-Encrypted: i=1; AJvYcCXa4HSf76Hc8zTqFmBVIZSpgzDsfQD6MaHoGi3EYRZQW0y6TfD26SHLQ2qU8F6Q45qRzJpNxBYzaliv@vger.kernel.org X-Gm-Message-State: AOJu0YxKFGO+7d3rmNHJJTyvpPPeMzaIiAyRU+lRjw915NCb0UFiWNx6 P15XVCKZPK+ldP8sPkGElSFxrEOBKu1cY990ACU++Fcf0R4R4xNi4CaZYYt/Mc2ia8KF8y+gXvx nLYnNp1lm22URLc4KKa/wB2ZwkFlIrTvUpKv5HZ6wVFsbhxdZn0rjF1lQrZjFlOOs X-Gm-Gg: ASbGnctyfPlKabpGrBlJPZpCDe2IrdVv2+nzEori2ZNAre9ML9E9wHoXGiGVibIvV6G APvfeVzJA85jTpj/Iey4/sVPW+pfyQFIH4/FF6jrkmE13BM4QYADqmPjpZrsqevVLe7Wm8hYLQY k7drSHcVy2cogIeAerGYgWlZr6hOy9Q1ZTO6Ezsd1UptItrZKN/YwqhjuwVR9/KEc3T8Yi7+VHf 29uk7EjhLyf3uEGpY/wIFBbY4atSs/zn1HQKGM+DDA7udvWz1gnbmslGwOOftmyHAo85f31vGDY DIA9bJ+jzUkN70ZpepvpECeNkQb0CQ/6GiFMp7WgH93l3AeVlGEUthW/zV7oCjn4vcAS0exM9yP R8sXhlH4xjo0hBzgnI/2jqvJ4qdyLK5f82w== X-Received: by 2002:a17:903:19e4:b0:235:ed01:18cd with SMTP id d9443c01a7336-244586db076mr26947145ad.44.1755156486864; Thu, 14 Aug 2025 00:28:06 -0700 (PDT) X-Google-Smtp-Source: AGHT+IH121erp+GTrCI0Or9C+AMZSaeXKyDpb3U15H/t0O4kF3zOf7YbtKObmx/HBOXrqW5N0wAC/g== X-Received: by 2002:a17:903:19e4:b0:235:ed01:18cd with SMTP id d9443c01a7336-244586db076mr26946765ad.44.1755156486289; Thu, 14 Aug 2025 00:28:06 -0700 (PDT) Received: from yijiyang-gv.ap.qualcomm.com (tpe-colo-wan-fw-bordernet.qualcomm.com. [103.229.16.4]) by smtp.gmail.com with ESMTPSA id 98e67ed59e1d1-3232f8c8e4bsm535458a91.2.2025.08.14.00.28.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 14 Aug 2025 00:28:05 -0700 (PDT) From: Yijie Yang Date: Thu, 14 Aug 2025 15:27:30 +0800 Subject: [PATCH v5 3/3] arm64: dts: qcom: Add base HAMOA-IOT-EVK board Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20250814-hamoa_initial-v5-3-817a9c6e8d47@oss.qualcomm.com> References: <20250814-hamoa_initial-v5-0-817a9c6e8d47@oss.qualcomm.com> In-Reply-To: <20250814-hamoa_initial-v5-0-817a9c6e8d47@oss.qualcomm.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: Yijie Yang , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Shuai Zhang , Yongxing Mou X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1755156471; l=22428; i=yijie.yang@oss.qualcomm.com; s=20240408; h=from:subject:message-id; bh=S+PRcLshjcevgFFkRmnpF2ebfw+1GgiwYl5B8VOawtQ=; b=4YdzFEHbcM/+fKBXYB3Q8pQnyAsSm9RmwM9+ylrHULFeoCLysTyOZI+ol2jaQgo15DC1tJ/B6 EoRnXG/t2sHDhf59dwy9es84k5FCLfgRBva6No0s4EFxv9Ro/tL9F1l X-Developer-Key: i=yijie.yang@oss.qualcomm.com; a=ed25519; pk=XvMv0rxjrXLYFdBXoFjTdOdAwDT5SPbQ5uAKGESDihk= X-Authority-Analysis: v=2.4 cv=X4lSKHTe c=1 sm=1 tr=0 ts=689d9008 cx=c_pps a=oF/VQ+ItUULfLr/lQ2/icg==:117 a=nuhDOHQX5FNHPW3J6Bj6AA==:17 a=IkcTkHD0fZMA:10 a=2OwXVqhp2XgA:10 a=COk6AnOGAAAA:8 a=EUspDBNiAAAA:8 a=_DTKrxg_pFKH8Kdk8cMA:9 a=QEXdDO2ut3YA:10 a=3WC7DwWrALyhR5TkjVHa:22 a=TjNXssC_j7lpFel5tvFf:22 X-Proofpoint-Spam-Details-Enc: AW1haW4tMjUwODA5MDAzMSBTYWx0ZWRfXyn2DuKCHn8nk gLOHXj31SFZ9FmhIjALvxnMFewkzsPJdqzVNyzOyx5episkIqaqDied6HYcls25k8Y4AY/XpmL1 +SmpWFNJpGp5Y+YoytMy6Jt6Oj+VR5kRAMq1IwXcRKNDW7j+CCd6NP0oCGrIDM/1cD8S321JzRY t6Eda8w+a/xUn11pDDMVv8tMqaFYD83rZHrjgSqlavbPY4qaWvPtWyCcJf6kYEiLM1Q3X5Gk4hU 8izymaLvfregxjGlaZWD7QlkZ54DRfesU2cp3PZpahvm/03eSjUQBo8PCd4h97bJIqHrMcOguiv wAifykRGwPjelof7MLAvDOcaw2UhsQ2Y19E70iitjeh4738A3PPGcU+7s2XsG+aiz53GUGG6glH YIVU2MhS X-Proofpoint-GUID: QeCpTBG4MrSyk9gaMiZ0rtBybeFakpwc X-Proofpoint-ORIG-GUID: QeCpTBG4MrSyk9gaMiZ0rtBybeFakpwc X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1099,Hydra:6.1.9,FMLib:17.12.80.40 definitions=2025-08-13_02,2025-08-11_01,2025-03-28_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 priorityscore=1501 clxscore=1015 malwarescore=0 adultscore=0 spamscore=0 bulkscore=0 suspectscore=0 impostorscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.19.0-2507300000 definitions=main-2508090031 The HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of the Hamoa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART. This change enables the following peripherals on the carrier board: - UART - On-board regulators - USB Type-C mux - Pinctrl - Embedded USB (EUSB) repeaters - NVMe - pmic-glink - USB DisplayPorts Co-developed-by: Shuai Zhang # Bluetooth Signed-off-by: Shuai Zhang Co-developed-by: Yongxing Mou # USB DisplayPorts Signed-off-by: Yongxing Mou Signed-off-by: Yijie Yang --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 987 +++++++++++++++++++++++++++++ 2 files changed, 988 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 94a84770b0802a9dc0c56ce6c59eea20967a5d89..5e19535ad63d4ec48342024bba084ee04f2a6ce0 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file mode 100644 index 0000000000000000000000000000000000000000..c7b7e4481b2c873be5ce68cbd52931b4971f7e85 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -0,0 +1,987 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include "hamoa-iot-som.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Hamoa IoT EVK"; + compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_sbu: endpoint { + remote-endpoint = <&usb_1_ss0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&retimer_ss2_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss2_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss2_con_sbu_out>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + /* Left unused as the retimer is not used on this board. */ + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p15: regulator-rtmr2-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p8: regulator-rtmr2-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_3p3: regulator-rtmr2-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-always-on; + }; + + usb-1-ss0-sbu-mux { + compatible = "onnn,fsusb42", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb_1_ss0_sbu_default>; + pinctrl-names = "default"; + + mode-switch; + orientation-switch; + + port { + usb_1_ss0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_ss0_sbu>; + }; + }; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK5>; + + vdd-supply = <&vreg_rtmr2_1p15>; + vdd33-supply = <&vreg_rtmr2_3p3>; + vdd33-cap-supply = <&vreg_rtmr2_3p3>; + vddar-supply = <&vreg_rtmr2_1p15>; + vddat-supply = <&vreg_rtmr2_1p15>; + vddio-supply = <&vreg_rtmr2_1p8>; + + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr2_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss2_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss2_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; +}; + +&mdss_dp3_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie6a { + vddpe-3v3-supply = <&vreg_nvme>; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "okay"; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&tlmm { + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr2_default: rtmr2-reset-n-active-state { + pins = "gpio185"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state { + pins = "gpio189"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state { + pins = "gpio126"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state { + pins = "gpio187"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_1_ss0_sbu_default: usb-1-ss0-sbu-state { + mode-pins { + pins = "gpio166"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + + oe-n-pins { + pins = "gpio168"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + sel-pins { + pins = "gpio167"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wwan_sw_en: wwan-sw-en-state { + pins = "gpio221"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* Switches USB signal routing between the USB connector and the Wi-Fi card. */ + wcn_usb_sw_n: wcn-usb-sw-n-state { + pins = "gpio225"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_hsphy { + phys = <&smb2360_0_eusb2_repeater>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_hsphy { + phys = <&smb2360_1_eusb2_repeater>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_hsphy { + phys = <&smb2360_2_eusb2_repeater>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&retimer_ss2_ss_in>; +}; + +&usb_2_hsphy { + phys = <&eusb5_repeater>; + + pinctrl-0 = <&wcn_usb_sw_n>; + pinctrl-names = "default"; +}; + +&usb_mp_hsphy0 { + phys = <&eusb6_repeater>; +}; + +&usb_mp_hsphy1 { + phys = <&eusb3_repeater>; +}; -- 2.34.1