devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: hans.zhang@cixtech.com
To: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
	mani@kernel.org, robh@kernel.org, kwilczynski@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: mpillai@cadence.com, fugang.duan@cixtech.com,
	guoyin.chen@cixtech.com, peter.chen@cixtech.com,
	cix-kernel-upstream@cixtech.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Hans Zhang <hans.zhang@cixtech.com>
Subject: [PATCH v8 12/15] PCI: sky1: Add PCIe host support for CIX Sky1
Date: Tue, 19 Aug 2025 19:52:36 +0800	[thread overview]
Message-ID: <20250819115239.4170604-13-hans.zhang@cixtech.com> (raw)
In-Reply-To: <20250819115239.4170604-1-hans.zhang@cixtech.com>

From: Hans Zhang <hans.zhang@cixtech.com>

Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based
on the Cadence PCIe core.

Supports MSI/MSI-x via GICv3, Single Virtual Channel, Single Function.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
---
Changes for v8:
- Optimization of CIX SKY1 Root Port driver. (Bjorn and Krzysztof)
- Use devm_platform_ioremap_resource_byname.
---
 drivers/pci/controller/cadence/Kconfig    |  15 ++
 drivers/pci/controller/cadence/Makefile   |   1 +
 drivers/pci/controller/cadence/pci-sky1.c | 232 ++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 drivers/pci/controller/cadence/pci-sky1.c

diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
index 117677a23d68..26a248cdc78a 100644
--- a/drivers/pci/controller/cadence/Kconfig
+++ b/drivers/pci/controller/cadence/Kconfig
@@ -42,6 +42,21 @@ config PCIE_CADENCE_PLAT_EP
 	  endpoint mode. This PCIe controller may be embedded into many
 	  different vendors SoCs.
 
+config PCI_SKY1_HOST
+	tristate "CIX SKY1 PCIe controller (host mode)"
+	depends on OF
+	select PCIE_CADENCE_HOST
+	select PCI_ECAM
+	help
+	  Say Y here if you want to support the CIX SKY1 PCIe platform
+	  controller in host mode. CIX SKY1 PCIe controller uses Cadence
+	  HPA (High Performance Architecture IP [Second generation of
+	  Cadence PCIe IP])
+
+	  This driver requires Cadence PCIe core infrastructure
+	  (PCIE_CADENCE_HOST) and hardware platform adaptation layer
+	  to function.
+
 config PCI_J721E
 	tristate
 	select PCIE_CADENCE_HOST if PCI_J721E_HOST != n
diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
index de4ddae7aca4..40d7c6e98b4d 100644
--- a/drivers/pci/controller/cadence/Makefile
+++ b/drivers/pci/controller/cadence/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host-mod.o
 obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep-mod.o
 obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
 obj-$(CONFIG_PCI_J721E) += pci-j721e.o
+obj-$(CONFIG_PCI_SKY1_HOST) += pci-sky1.o
diff --git a/drivers/pci/controller/cadence/pci-sky1.c b/drivers/pci/controller/cadence/pci-sky1.c
new file mode 100644
index 000000000000..7dd3546275c5
--- /dev/null
+++ b/drivers/pci/controller/cadence/pci-sky1.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe controller driver for CIX's sky1 SoCs
+ *
+ * Author: Hans Zhang <hans.zhang@cixtech.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/pci_ids.h>
+
+#include "pcie-cadence.h"
+#include "pcie-cadence-host-common.h"
+
+#define STRAP_REG(n)			((n) * 0x04)
+#define STATUS_REG(n)			((n) * 0x04)
+#define  LINK_TRAINING_ENABLE		BIT(0)
+#define  LINK_COMPLETE			BIT(0)
+
+#define SKY1_IP_REG_BANK		0x1000
+#define SKY1_IP_CFG_CTRL_REG_BANK	0x4c00
+#define SKY1_IP_AXI_MASTER_COMMON	0xf000
+#define SKY1_AXI_SLAVE			0x9000
+#define SKY1_AXI_MASTER			0xb000
+#define SKY1_AXI_HLS_REGISTERS		0xc000
+#define SKY1_AXI_RAS_REGISTERS		0xe000
+#define SKY1_DTI_REGISTERS		0xd000
+
+#define IP_REG_I_DBG_STS_0		0x420
+
+struct sky1_pcie {
+	struct cdns_pcie *cdns_pcie;
+	struct cdns_pcie_rc *cdns_pcie_rc;
+
+	struct resource *cfg_res;
+	struct resource *msg_res;
+	struct pci_config_window *cfg;
+	void __iomem *strap_base;
+	void __iomem *status_base;
+	void __iomem *reg_base;
+	void __iomem *cfg_base;
+	void __iomem *msg_base;
+};
+
+static int sky1_pcie_resource_get(struct platform_device *pdev,
+				  struct sky1_pcie *pcie)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *base;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "reg");
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "unable to find reg registers\n");
+	pcie->reg_base = base;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+	if (!res)
+		return dev_err_probe(dev, ENXIO, "unable to get cfg resource\n");
+	pcie->cfg_res = res;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "rcsu_strap");
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "unable to find rcsu strap registers\n");
+	pcie->strap_base = base;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "rcsu_status");
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "unable to find rcsu status registers\n");
+	pcie->status_base = base;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "msg");
+	if (!res)
+		return dev_err_probe(dev, ENXIO, "unable to get msg resource\n");
+	pcie->msg_res = res;
+	pcie->msg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->msg_base)) {
+		return dev_err_probe(dev, PTR_ERR(pcie->msg_base),
+				     "unable to ioremap msg resource\n");
+	}
+
+	return 0;
+}
+
+static int sky1_pcie_start_link(struct cdns_pcie *cdns_pcie)
+{
+	struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 val;
+
+	val = readl(pcie->strap_base + STRAP_REG(1));
+	val |= LINK_TRAINING_ENABLE;
+	writel(val, pcie->strap_base + STRAP_REG(1));
+
+	return 0;
+}
+
+static void sky1_pcie_stop_link(struct cdns_pcie *cdns_pcie)
+{
+	struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
+	u32 val;
+
+	val = readl(pcie->strap_base + STRAP_REG(1));
+	val &= ~LINK_TRAINING_ENABLE;
+	writel(val, pcie->strap_base + STRAP_REG(1));
+}
+
+static bool sky1_pcie_link_up(struct cdns_pcie *cdns_pcie)
+{
+	u32 val;
+
+	val = cdns_pcie_hpa_readl(cdns_pcie, REG_BANK_IP_REG,
+				  IP_REG_I_DBG_STS_0);
+	return val & LINK_COMPLETE;
+}
+
+static const struct cdns_pcie_ops sky1_pcie_ops = {
+	.start_link = sky1_pcie_start_link,
+	.stop_link = sky1_pcie_stop_link,
+	.link_up = sky1_pcie_link_up,
+};
+
+static int sky1_pcie_probe(struct platform_device *pdev)
+{
+	struct cdns_plat_pcie_of_data *reg_off;
+	struct device *dev = &pdev->dev;
+	struct pci_host_bridge *bridge;
+	struct cdns_pcie *cdns_pcie;
+	struct resource_entry *bus;
+	struct cdns_pcie_rc *rc;
+	struct sky1_pcie *pcie;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
+	if (!bridge)
+		return -ENOMEM;
+
+	ret = sky1_pcie_resource_get(pdev, pcie);
+	if (ret < 0)
+		return -ENXIO;
+
+	bus = resource_list_first_type(&bridge->windows, IORESOURCE_BUS);
+	if (!bus)
+		return -ENODEV;
+
+	pcie->cfg = pci_ecam_create(dev, pcie->cfg_res, bus->res,
+				    &pci_generic_ecam_ops);
+	if (IS_ERR(pcie->cfg))
+		return PTR_ERR(pcie->cfg);
+
+	bridge->ops = (struct pci_ops *)&pci_generic_ecam_ops.pci_ops;
+	rc = pci_host_bridge_priv(bridge);
+	rc->ecam_support_flag = 1;
+	rc->cfg_base = pcie->cfg->win;
+	rc->cfg_res = &pcie->cfg->res;
+
+	cdns_pcie = &rc->pcie;
+	cdns_pcie->dev = dev;
+	cdns_pcie->ops = &sky1_pcie_ops;
+	cdns_pcie->reg_base = pcie->reg_base;
+	cdns_pcie->msg_res = pcie->msg_res;
+	cdns_pcie->is_rc = 1;
+
+	reg_off = devm_kzalloc(dev, sizeof(*reg_off), GFP_KERNEL);
+	if (!reg_off)
+		return -ENOMEM;
+
+	reg_off->ip_reg_bank_offset = SKY1_IP_REG_BANK;
+	reg_off->ip_cfg_ctrl_reg_offset = SKY1_IP_CFG_CTRL_REG_BANK;
+	reg_off->axi_mstr_common_offset = SKY1_IP_AXI_MASTER_COMMON;
+	reg_off->axi_slave_offset = SKY1_AXI_SLAVE;
+	reg_off->axi_master_offset = SKY1_AXI_MASTER;
+	reg_off->axi_hls_offset = SKY1_AXI_HLS_REGISTERS;
+	reg_off->axi_ras_offset = SKY1_AXI_RAS_REGISTERS;
+	reg_off->axi_dti_offset = SKY1_DTI_REGISTERS;
+	cdns_pcie->cdns_pcie_reg_offsets = reg_off;
+
+	pcie->cdns_pcie = cdns_pcie;
+	pcie->cdns_pcie_rc = rc;
+	pcie->cfg_base = rc->cfg_base;
+	bridge->sysdata = pcie->cfg;
+
+	rc->vendor_id = PCI_VENDOR_ID_CIX;
+	rc->device_id = PCI_DEVICE_ID_CIX_SKY1;
+	rc->no_inbound_flag = 1;
+
+	dev_set_drvdata(dev, pcie);
+
+	ret = cdns_pcie_hpa_host_setup(rc);
+	if (ret < 0) {
+		pci_ecam_free(pcie->cfg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_sky1_pcie_match[] = {
+	{ .compatible = "cix,sky1-pcie-host", },
+	{},
+};
+
+static void sky1_pcie_remove(struct platform_device *pdev)
+{
+	struct sky1_pcie *pcie = platform_get_drvdata(pdev);
+
+	pci_ecam_free(pcie->cfg);
+}
+
+static struct platform_driver sky1_pcie_driver = {
+	.probe  = sky1_pcie_probe,
+	.remove = sky1_pcie_remove,
+	.driver = {
+		.name = "sky1-pcie",
+		.of_match_table = of_sky1_pcie_match,
+	},
+};
+module_platform_driver(sky1_pcie_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCIe controller driver for CIX's sky1 SoCs");
+MODULE_AUTHOR("Hans Zhang <hans.zhang@cixtech.com>");
-- 
2.49.0


  parent reply	other threads:[~2025-08-19 11:55 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-19 11:52 [PATCH v8 00/15] Enhance the PCIe controller driver for next generation controllers hans.zhang
2025-08-19 11:52 ` [PATCH v8 01/15] PCI: cadence: Add module support for platform controller driver hans.zhang
2025-08-19 11:52 ` [PATCH v8 02/15] PCI: cadence: Split PCIe controller header file hans.zhang
2025-08-19 11:52 ` [PATCH v8 03/15] PCI: cadence: Add register definitions for High Perf Architecture (HPA) hans.zhang
2025-08-19 17:36   ` ALOK TIWARI
2025-08-20  8:14     ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 04/15] PCI: cadence: Add helper functions for supporting " hans.zhang
2025-08-19 11:52 ` [PATCH v8 05/15] PCI: cadence: Move PCIe EP common functions to a separate file hans.zhang
2025-08-19 17:46   ` ALOK TIWARI
2025-08-19 11:52 ` [PATCH v8 06/15] PCI: cadence: Move PCIe RP " hans.zhang
2025-08-30 10:36   ` Manivannan Sadhasivam
2025-09-01  4:30     ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 07/15] PCI: cadence: Move PCIe controller common functions as " hans.zhang
2025-08-30 11:21   ` Manivannan Sadhasivam
2025-09-01  4:30     ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 08/15] PCI: cadence: Add support for High Perf Architecture (HPA) controller hans.zhang
2025-08-26 12:08   ` kernel test robot
2025-08-30 13:18   ` Manivannan Sadhasivam
2025-09-01  4:34     ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 09/15] PCI: cadence: Update PCIe platform to use register offsets passed hans.zhang
2025-08-19 11:52 ` [PATCH v8 10/15] dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings hans.zhang
2025-08-20  7:23   ` Krzysztof Kozlowski
2025-08-19 11:52 ` [PATCH v8 11/15] PCI: Add Cix Technology Vendor and Device ID hans.zhang
2025-08-30 13:20   ` Manivannan Sadhasivam
2025-08-30 13:21   ` Manivannan Sadhasivam
2025-09-01  3:03     ` Hans Zhang
2025-08-19 11:52 ` hans.zhang [this message]
2025-08-30 13:29   ` [PATCH v8 12/15] PCI: sky1: Add PCIe host support for CIX Sky1 Manivannan Sadhasivam
2025-09-01  3:04     ` Hans Zhang
2025-08-19 11:52 ` [PATCH v8 13/15] MAINTAINERS: add entry for CIX Sky1 PCIe driver hans.zhang
2025-08-19 11:52 ` [PATCH v8 14/15] arm64: dts: cix: Add PCIe Root Complex on sky1 hans.zhang
2025-08-30 13:31   ` Manivannan Sadhasivam
2025-09-01  3:09     ` Hans Zhang
2025-08-19 11:52 ` [PATCH v8 15/15] arm64: dts: cix: Enable PCIe on the Orion O6 board hans.zhang
2025-08-30 13:33   ` Manivannan Sadhasivam
2025-09-01  3:14     ` Hans Zhang
2025-09-01  3:17       ` Hans Zhang
2025-08-30 13:38 ` [PATCH v8 00/15] Enhance the PCIe controller driver for next generation controllers Manivannan Sadhasivam
2025-09-01  4:28   ` Manikandan Karunakaran Pillai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250819115239.4170604-13-hans.zhang@cixtech.com \
    --to=hans.zhang@cixtech.com \
    --cc=bhelgaas@google.com \
    --cc=cix-kernel-upstream@cixtech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fugang.duan@cixtech.com \
    --cc=guoyin.chen@cixtech.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=mpillai@cadence.com \
    --cc=peter.chen@cixtech.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).