[PATCH v13 11/11] arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board

[Christian Bruel <christian.bruel@foss.st.com>]

Add PCIe RC and EP support on stm32mp257f-ev1 board.
Default to RC mode.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 836b1958ce65..b20bff82da80 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -265,6 +265,27 @@ scmi_vdd_sdcard: regulator@23 {
 	};
 };
 
+&pcie_ep {
+	pinctrl-names = "default", "init";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pcie_rc {
+	pinctrl-names = "default", "init", "sleep";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	pinctrl-2 = <&pcie_sleep_pins_a>;
+	status = "okay";
+
+	pcie@0,0 {
+		 reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+		 wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	};
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-- 
2.34.1