From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from sender4-pp-f112.zoho.com (sender4-pp-f112.zoho.com [136.143.188.112]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C66FC2E542C; Wed, 20 Aug 2025 17:15:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=pass smtp.client-ip=136.143.188.112 ARC-Seal:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1755710151; cv=pass; b=Rtlo1MASgx1X/L9XYT1tOg7k9Yl3lvQdgAj7L3CAR4tZQo8FRjOWMcbHVI7hjFCPWDDr7rtsjHdsifGWdWYcvUNZHUQ/joCLDMVhb87axYqGHOmmU9WcItUV76VZNnA9rMoiRVFeRiiG7ABncOlWKfWQpJevIofW+L8dTgOIw0A= ARC-Message-Signature:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1755710151; c=relaxed/simple; bh=eTVST2dGaAU4Hl8crv3DK73ugB3li9vHIhJiTKOvM5c=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=mFwY+/mM4r3bPXfyVVjesgrDIHCW6gTvFBnMFSPDLLHaSNnOW4LVmicOq7tNLCOQ+olSZecgF0RJGVM0/ytzLs7oAE2pDJrb5z+O7ztMxe551vptRmpdODo6y2qTC/3hRSJY2oMk20DPZvj+0fo7hN2wANapxzwRT4PsgUKdG0k= ARC-Authentication-Results:i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=collabora.com; spf=pass smtp.mailfrom=collabora.com; dkim=pass (1024-bit key) header.d=collabora.com header.i=ariel.dalessandro@collabora.com header.b=SJM1kBiO; arc=pass smtp.client-ip=136.143.188.112 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=collabora.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=collabora.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=collabora.com header.i=ariel.dalessandro@collabora.com header.b="SJM1kBiO" ARC-Seal: i=1; a=rsa-sha256; t=1755710101; cv=none; d=zohomail.com; s=zohoarc; b=RSDA9vX91pfS8xhsuAJ9jQZ7oEw1TLd3MDAb04DbIdploYze9OwWkcELTjL9jQHvCprYCvzy2+L8x3oWXZDYkF7LRINPBGRhSL+ieIgKYM7JU1yHA5Yz/T6HIcPhQTEI+o1Wea4iIpt1zj50xYxN61KSqYLjTCSysu5TB4h05w4= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=zohomail.com; s=zohoarc; t=1755710101; h=Content-Transfer-Encoding:Cc:Cc:Date:Date:From:From:In-Reply-To:MIME-Version:Message-ID:References:Subject:Subject:To:To:Message-Id:Reply-To; bh=2QZKUiKO5lovXcillJao8ulAS5I79dfCerJQtCsOaUA=; b=aEdGhgmDJ2+E459cl46l+ED1hwOCezkCro/k2D3eJQ3XM5lc2eXo1mNXW/EteJvSKdcLPnuyy+WUJoHZLTIt1zSmWZ14OO73CcSLIaJMxi5mYU6TTOwjfQXaKKvg/XzBIM8z8LwL5QR9ZG0Kl6JtZdrIJyvpBac8MNs0+4pgjEg= ARC-Authentication-Results: i=1; mx.zohomail.com; dkim=pass header.i=collabora.com; spf=pass smtp.mailfrom=ariel.dalessandro@collabora.com; dmarc=pass header.from= DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; t=1755710101; s=zohomail; d=collabora.com; i=ariel.dalessandro@collabora.com; h=From:From:To:To:Cc:Cc:Subject:Subject:Date:Date:Message-ID:In-Reply-To:References:MIME-Version:Content-Transfer-Encoding:Message-Id:Reply-To; bh=2QZKUiKO5lovXcillJao8ulAS5I79dfCerJQtCsOaUA=; b=SJM1kBiOU+oEdIBUrRU5ZHbpTcW1kOu7nkkb/4VFvcsZQXp+LQE76Xxb0/cEc+Jo iUbGMmt67rxINraw9wUbhUC7BCyZ8FUtIlEWRwo3gwGViU+FB8LlKuEp9oKwi8WPDWd DczidVtSSPnmsX4vn2Jw7X1Pt9Y/RI+TQiwYDKmY= Received: by mx.zohomail.com with SMTPS id 1755710098815670.5252480182933; Wed, 20 Aug 2025 10:14:58 -0700 (PDT) From: Ariel D'Alessandro To: airlied@gmail.com, amergnat@baylibre.com, andrew+netdev@lunn.ch, andrew-ct.chen@mediatek.com, angelogioacchino.delregno@collabora.com, ariel.dalessandro@collabora.com, broonie@kernel.org, chunkuang.hu@kernel.org, ck.hu@mediatek.com, conor+dt@kernel.org, davem@davemloft.net, dmitry.torokhov@gmail.com, edumazet@google.com, flora.fu@mediatek.com, houlong.wei@mediatek.com, jeesw@melfas.com, jmassot@collabora.com, kernel@collabora.com, krzk+dt@kernel.org, kuba@kernel.org, kyrie.wu@mediatek.corp-partner.google.com, lgirdwood@gmail.com, linus.walleij@linaro.org, louisalexis.eyraud@collabora.com, maarten.lankhorst@linux.intel.com, matthias.bgg@gmail.com, mchehab@kernel.org, minghsiu.tsai@mediatek.com, mripard@kernel.org, p.zabel@pengutronix.de, pabeni@redhat.com, robh@kernel.org, sean.wang@kernel.org, simona@ffwll.ch, support.opensource@diasemi.com, tiffany.lin@mediatek.com, tzimmermann@suse.de, yunfei.dong@mediatek.com Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-sound@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH v1 04/14] net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML Date: Wed, 20 Aug 2025 14:12:52 -0300 Message-ID: <20250820171302.324142-5-ariel.dalessandro@collabora.com> X-Mailer: git-send-email 2.50.1 In-Reply-To: <20250820171302.324142-1-ariel.dalessandro@collabora.com> References: <20250820171302.324142-1-ariel.dalessandro@collabora.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-ZohoMailClient: External Convert the existing text-based DT bindings for Marvell 8897/8997 (sd8897/sd8997) bluetooth devices controller to a YAML schema. While here, bindings for "usb1286,204e" (USB interface) are dropped from the YAML definition as these are currently documented in file: - Documentation/devicetree/bindings/net/btusb.txt Signed-off-by: Ariel D'Alessandro --- .../bindings/net/marvell,sd8897-bt.yaml | 91 +++++++++++++++++++ .../bindings/net/marvell-bt-8xxx.txt | 83 ----------------- 2 files changed, 91 insertions(+), 83 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt diff --git a/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml new file mode 100644 index 0000000000000..6539868c08b8a --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,sd8897-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO) + +maintainers: + - Ariel D'Alessandro + +properties: + compatible: + enum: + - marvell,sd8897-bt + - marvell,sd8997-bt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + marvell,cal-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data downloaded to the device during initialization. + minItems: 28 + + marvell,wakeup-pin: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host + system. + + marvell,wakeup-gap-ms: + description: + Wakeup latency of the host platform. Required by the chip sleep feature. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + + sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = ; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; + }; + + mmc3 { + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + bluetooth: bluetooth@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + marvell,cal-data = /bits/ 8 < + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0xf0 0x00>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt deleted file mode 100644 index 957e5e5c2927c..0000000000000 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based) ------- -The 8997 devices supports multiple interfaces. When used on SDIO interfaces, -the btmrvl driver is used and when used on USB interface, the btusb driver is -used. - -Required properties: - - - compatible : should be one of the following: - * "marvell,sd8897-bt" (for SDIO) - * "marvell,sd8997-bt" (for SDIO) - * "usb1286,204e" (for USB) - -Optional properties: - - - marvell,cal-data: Calibration data downloaded to the device during - initialization. This is an array of 28 values(u8). - This is only applicable to SDIO devices. - - - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. - firmware will use the pin to wakeup host system (u16). - - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host - platform. The value will be configured to firmware. This - is needed to work chip's sleep feature as expected (u16). - - interrupt-names: Used only for USB based devices (See below) - - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the - driver will use the first interrupt specified in the interrupt - array. For USB based devices, the driver will use the interrupt - named "wakeup" from the interrupt-names and interrupt arrays. - The driver will request an irq based on this interrupt number. - During system suspend, the irq will be enabled so that the - bluetooth chip can wakeup host platform under certain - conditions. During system resume, the irq will be disabled - to make sure unnecessary interrupt is not received. - -Example: - -IRQ pin 119 is used as system wakeup source interrupt. -wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host -using this device side pin and wakeup latency. - -Example for SDIO device follows (calibration data is also available in -below example). - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - btmrvl: bluetooth@2 { - compatible = "marvell,sd8897-bt"; - reg = <2>; - interrupt-parent = <&pio>; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - - marvell,cal-data = /bits/ 8 < - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0xf0 0x00>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; - -Example for USB device: - -&usb_host1_ohci { - #address-cells = <1>; - #size-cells = <0>; - - mvl_bt1: bt@1 { - compatible = "usb1286,204e"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupt-names = "wakeup"; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; -- 2.50.1