[PATCH v1 00/14] MediaTek dt-bindings sanitization (MT8173)

[PATCH v1 00/14] MediaTek dt-bindings sanitization (MT8173)

[Ariel D'Alessandro]

This patch series continues the effort to address Device Tree validation
warnings for MediaTek platforms, with a focus on MT8173. It follows the initial
cleanup series by Angelo (https://www.spinics.net/lists/kernel/msg5780177.html)

Similarly to the ongoing MT8183 work done by Julien Massot, this patchset
eliminates several of the remaining warnings by improving or converting DT
bindings to YAML, adding missing properties, and updating device tree files
accordingly.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Ariel D'Alessandro (14):
  media: dt-bindings: Convert MediaTek mt8173-mdp bindings to YAML
  media: dt-bindings: Convert MediaTek mt8173-vpu bindings to YAML
  dt-bindings: arm: mediatek: mmsys: Add assigned-clocks/rates
    properties
  net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML
  sound: dt-bindings: Convert MediaTek RT5650 codecs bindings to YAML
  dt-bindings: display: mediatek,od: Add mediatek,gce-client-reg
    property
  dt-bindings: display: mediatek,ufoe: Add mediatek,gce-client-reg
    property
  arm64: dts: mediatek: mt8173: Fix mt8173-pinctrl node names
  dt-bindings: pinctrl: mediatek,mt65xx-pinctrl: Allow gpio-line-names
  regulator: dt-bindings: Convert Dialog Semiconductor DA9211 Regulators
    to YAML
  arm64: dts: mediatek: mt8173-elm: Drop unused bank supply
  dt-bindings: soc: mediatek: pwrap: Add power-domains property
  dt-bindings: input/touchscreen: Convert MELFAS MIP4 Touchscreen to
    YAML
  dt-bindings: media: mediatek,jpeg: Fix jpeg encoder/decoder ranges

 .../bindings/arm/mediatek/mediatek,mmsys.yaml |   9 +
 .../display/mediatek/mediatek,od.yaml         |  10 +
 .../display/mediatek/mediatek,ufoe.yaml       |  11 +
 .../input/touchscreen/melfas,mip4_ts.yaml     |  55 +++++
 .../input/touchscreen/melfas_mip4.txt         |  20 --
 .../bindings/media/mediatek,mt8173-mdp.yaml   | 174 +++++++++++++++
 .../bindings/media/mediatek,mt8173-vpu.yaml   |  76 +++++++
 .../media/mediatek,mt8195-jpegdec.yaml        |  31 +--
 .../media/mediatek,mt8195-jpegenc.yaml        |  15 +-
 .../bindings/media/mediatek-mdp.txt           |  95 --------
 .../bindings/media/mediatek-vpu.txt           |  31 ---
 .../bindings/net/marvell,sd8897-bt.yaml       |  91 ++++++++
 .../bindings/net/marvell-bt-8xxx.txt          |  83 -------
 .../pinctrl/mediatek,mt65xx-pinctrl.yaml      |   2 +
 .../devicetree/bindings/regulator/da9211.txt  | 205 ------------------
 .../bindings/regulator/dlg,da9211.yaml        | 104 +++++++++
 .../bindings/soc/mediatek/mediatek,pwrap.yaml |  15 ++
 .../sound/mediatek,mt8173-rt5650.yaml         |  73 +++++++
 .../bindings/sound/mt8173-rt5650.txt          |  31 ---
 .../boot/dts/mediatek/mt8173-elm-hana.dtsi    |   2 +-
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi  |  31 ++-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts   |  14 +-
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  14 +-
 23 files changed, 672 insertions(+), 520 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp.txt
 delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt
 create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
 delete mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/mt8173-rt5650.txt

-- 
2.50.1

[PATCH v1 01/14] media: dt-bindings: Convert MediaTek mt8173-mdp bindings to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for MediaTek MT8173 Media Data Path
to a YAML schema.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/media/mediatek,mt8173-mdp.yaml   | 174 ++++++++++++++++++
 .../bindings/media/mediatek-mdp.txt           |  95 ----------
 2 files changed, 174 insertions(+), 95 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
new file mode 100644
index 0000000000000..f3a08afc305b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8173-mdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8173 Media Data Path
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+description:
+  Media Data Path is used for scaling and color space conversion.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-mdp-rdma
+              - mediatek,mt8173-mdp-rsz
+              - mediatek,mt8173-mdp-wdma
+              - mediatek,mt8173-mdp-wrot
+      - items:
+          - enum:
+              - mediatek,mt8173-mdp-rdma
+              - mediatek,mt8173-mdp-rsz
+              - mediatek,mt8173-mdp-wdma
+              - mediatek,mt8173-mdp-wrot
+          - const: mediatek,mt8173-mdp
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    description: |
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+    maxItems: 1
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-mdp-rdma
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Mutex clock
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-mdp-rdma
+              - mediatek,mt8173-mdp-wdma
+              - mediatek,mt8173-mdp-wrot
+    then:
+      required:
+        - iommus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-mdp
+    then:
+      required:
+        - mediatek,vpu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mdp_rdma0: rdma@14001000 {
+            compatible = "mediatek,mt8173-mdp-rdma",
+                         "mediatek,mt8173-mdp";
+            reg = <0 0x14001000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                     <&mmsys CLK_MM_MUTEX_32K>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+            mediatek,vpu = <&vpu>;
+        };
+
+        mdp_rdma1: rdma@14002000 {
+            compatible = "mediatek,mt8173-mdp-rdma";
+            reg = <0 0x14002000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+                     <&mmsys CLK_MM_MUTEX_32K>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+        };
+
+        mdp_rsz0: rsz@14003000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14003000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_rsz1: rsz@14004000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14004000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_rsz2: rsz@14005000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14005000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_wdma0: wdma@14006000 {
+            compatible = "mediatek,mt8173-mdp-wdma";
+            reg = <0 0x14006000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WDMA>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WDMA>;
+        };
+
+        mdp_wrot0: wrot@14007000 {
+            compatible = "mediatek,mt8173-mdp-wrot";
+            reg = <0 0x14007000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WROT0>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WROT0>;
+        };
+
+        mdp_wrot1: wrot@14008000 {
+            compatible = "mediatek,mt8173-mdp-wrot";
+            reg = <0 0x14008000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WROT1>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WROT1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
deleted file mode 100644
index 53ef26e2c8570..0000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-* Mediatek Media Data Path
-
-Media Data Path is used for scaling and color space conversion.
-
-Required properties (controller node):
-- compatible: "mediatek,mt8173-mdp"
-- mediatek,vpu: the node of video processor unit, see
-  Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
-
-Required properties (all function blocks, child node):
-- compatible: Should be one of
-        "mediatek,mt8173-mdp-rdma"  - read DMA
-        "mediatek,mt8173-mdp-rsz"   - resizer
-        "mediatek,mt8173-mdp-wdma"  - write DMA
-        "mediatek,mt8173-mdp-wrot"  - write DMA with rotation
-- reg: Physical base address and length of the function block register space
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-
-Required properties (DMA function blocks, child node):
-- compatible: Should be one of
-        "mediatek,mt8173-mdp-rdma"
-        "mediatek,mt8173-mdp-wdma"
-        "mediatek,mt8173-mdp-wrot"
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	mdp_rdma0: rdma@14001000 {
-		compatible = "mediatek,mt8173-mdp-rdma";
-			     "mediatek,mt8173-mdp";
-		reg = <0 0x14001000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-			 <&mmsys CLK_MM_MUTEX_32K>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,vpu = <&vpu>;
-	};
-
-	mdp_rdma1: rdma@14002000 {
-		compatible = "mediatek,mt8173-mdp-rdma";
-		reg = <0 0x14002000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RDMA1>,
-			 <&mmsys CLK_MM_MUTEX_32K>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-	};
-
-	mdp_rsz0: rsz@14003000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14003000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ0>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_rsz1: rsz@14004000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14004000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ1>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_rsz2: rsz@14005000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14005000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ2>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_wdma0: wdma@14006000 {
-		compatible = "mediatek,mt8173-mdp-wdma";
-		reg = <0 0x14006000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WDMA>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-	};
-
-	mdp_wrot0: wrot@14007000 {
-		compatible = "mediatek,mt8173-mdp-wrot";
-		reg = <0 0x14007000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WROT0>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-	};
-
-	mdp_wrot1: wrot@14008000 {
-		compatible = "mediatek,mt8173-mdp-wrot";
-		reg = <0 0x14008000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WROT1>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-	};
-- 
2.50.1

Re: [PATCH v1 01/14] media: dt-bindings: Convert MediaTek mt8173-mdp bindings to YAML

[Krzysztof Kozlowski]

On Wed, Aug 20, 2025 at 02:12:49PM -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for MediaTek MT8173 Media Data Path
> to a YAML schema.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/media/mediatek,mt8173-mdp.yaml   | 174 ++++++++++++++++++
>  .../bindings/media/mediatek-mdp.txt           |  95 ----------
>  2 files changed, 174 insertions(+), 95 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
> new file mode 100644
> index 0000000000000..f3a08afc305b1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
> @@ -0,0 +1,174 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mt8173-mdp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT8173 Media Data Path
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +
> +description:
> +  Media Data Path is used for scaling and color space conversion.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

Just enum, no items here


> +          - enum:
> +              - mediatek,mt8173-mdp-rdma
> +              - mediatek,mt8173-mdp-rsz
> +              - mediatek,mt8173-mdp-wdma
> +              - mediatek,mt8173-mdp-wrot
> +      - items:
> +          - enum:
> +              - mediatek,mt8173-mdp-rdma
> +              - mediatek,mt8173-mdp-rsz
> +              - mediatek,mt8173-mdp-wdma
> +              - mediatek,mt8173-mdp-wrot
> +          - const: mediatek,mt8173-mdp

This makes no sense. How devices can be compatible and can not be
compatible.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks: true

No, there's no such syntax. Look at other bindings.


> +
> +  power-domains:
> +    maxItems: 1
> +
> +  iommus:
> +    description: |

Drop |

> +      This property should point to the respective IOMMU block with master port as argument,
> +      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.

Drop entire description, completely redundant. I don't know why my patch
fixing this was not applied, so you keep repeating same mistakes...

> +    maxItems: 1
> +
> +  mediatek,vpu:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Describes point to vpu.

Useless description. We see that from the property name. Explain the
purpose in the hardware.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - power-domains
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8173-mdp-rdma
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Main clock
> +            - description: Mutex clock
> +    else:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Main clock
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - mediatek,mt8173-mdp-rdma
> +              - mediatek,mt8173-mdp-wdma
> +              - mediatek,mt8173-mdp-wrot
> +    then:
> +      required:
> +        - iommus
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8173-mdp

This makes no sense either.

> +    then:
> +      required:
> +        - mediatek,vpu
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    #include <dt-bindings/memory/mt8173-larb-port.h>
> +    #include <dt-bindings/power/mt8173-power.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mdp_rdma0: rdma@14001000 {

One example is enough. Two could be fine if they differ significantly.

Best regards,
Krzysztof

[PATCH v1 02/14] media: dt-bindings: Convert MediaTek mt8173-vpu bindings to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for Mediatek MT8173 Video Processor
Unit to a YAML schema.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/media/mediatek,mt8173-vpu.yaml   | 76 +++++++++++++++++++
 .../bindings/media/mediatek-vpu.txt           | 31 --------
 2 files changed, 76 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
new file mode 100644
index 0000000000000..44f5d7cc44042
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8173-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8173 Video Processor Unit
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+description:
+  Video Processor Unit is a HW video controller. It controls HW Codec including
+  H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
+
+properties:
+  compatible:
+    const: mediatek,mt8173-vpu
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: tcm
+      - const: cfg_reg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: main
+
+  memory-region:
+    description:
+      phandle to a node describing reserved memory used by VPU
+      (see bindings/reserved-memory/reserved-memory.txt)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vpu: vpu@10020000 {
+            compatible = "mediatek,mt8173-vpu";
+            reg = <0 0x10020000 0 0x30000>,
+                  <0 0x10050000 0 0x100>;
+            reg-names = "tcm", "cfg_reg";
+            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&topckgen CLK_TOP_SCP_SEL>;
+            clock-names = "main";
+            memory-region = <&vpu_dma_reserved>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek-vpu.txt b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
deleted file mode 100644
index 2a5bac37f9a22..0000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vpu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Mediatek Video Processor Unit
-
-Video Processor Unit is a HW video controller. It controls HW Codec including
-H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
-
-Required properties:
-  - compatible: "mediatek,mt8173-vpu"
-  - reg: Must contain an entry for each entry in reg-names.
-  - reg-names: Must include the following entries:
-    "tcm": tcm base
-    "cfg_reg": Main configuration registers base
-  - interrupts: interrupt number to the cpu.
-  - clocks : clock name from clock manager
-  - clock-names: must be main. It is the main clock of VPU
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for VPU extended memory; if not present, VPU may be located
-    anywhere in the memory
-
-Example:
-	vpu: vpu@10020000 {
-		compatible = "mediatek,mt8173-vpu";
-		reg = <0 0x10020000 0 0x30000>,
-		      <0 0x10050000 0 0x100>;
-		reg-names = "tcm", "cfg_reg";
-		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen TOP_SCP_SEL>;
-		clock-names = "main";
-	};
-- 
2.50.1

Re: [PATCH v1 02/14] media: dt-bindings: Convert MediaTek mt8173-vpu bindings to YAML

[Krzysztof Kozlowski]

On Wed, Aug 20, 2025 at 02:12:50PM -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for Mediatek MT8173 Video Processor
> Unit to a YAML schema.

DT schema, not YAML. Don't say YAML at all, neither here nor in subject.

Also looks not wrapped...

> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/media/mediatek,mt8173-vpu.yaml   | 76 +++++++++++++++++++
>  .../bindings/media/mediatek-vpu.txt           | 31 --------
>  2 files changed, 76 insertions(+), 31 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
> new file mode 100644
> index 0000000000000..44f5d7cc44042
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mt8173-vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT8173 Video Processor Unit
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +
> +description:
> +  Video Processor Unit is a HW video controller. It controls HW Codec including
> +  H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).

Please wrap code according to the preferred limit expressed in Kernel
coding style (checkpatch is not a coding style description, but only a
tool).  However don't wrap blindly (see Kernel coding style).

> +
> +properties:
> +  compatible:
> +    const: mediatek,mt8173-vpu
> +
> +  reg:
> +    minItems: 2

No, from where do you get such syntax?

> +
> +  reg-names:
> +    items:
> +      - const: tcm
> +      - const: cfg_reg
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: main
> +
> +  memory-region:
> +    description:
> +      phandle to a node describing reserved memory used by VPU
> +      (see bindings/reserved-memory/reserved-memory.txt)

Drop, redundant description.

Best regards,
Krzysztof

[PATCH v1 03/14] dt-bindings: arm: mediatek: mmsys: Add assigned-clocks/rates properties

[Ariel D'Alessandro]

Current, the DT bindings for MediaTek mmsys controller is missing the
assigned-clocks and assigned-clocks-rates properties. Add these and
update the example as well.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 3f4262e93c789..d045d366eb8e2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -68,6 +68,12 @@ properties:
       of the power controller specified by phandle. See
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
 
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
   mboxes:
     description:
       Using mailbox to communicate with GCE, it should have this
@@ -130,6 +136,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/mt8173-clk.h>
     #include <dt-bindings/power/mt8173-power.h>
     #include <dt-bindings/gce/mt8173-gce.h>
 
@@ -137,6 +144,8 @@ examples:
         compatible = "mediatek,mt8173-mmsys", "syscon";
         reg = <0x14000000 0x1000>;
         power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+        assigned-clock-rates = <400000000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
         mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
-- 
2.50.1

Re: [PATCH v1 03/14] dt-bindings: arm: mediatek: mmsys: Add assigned-clocks/rates properties

[Krzysztof Kozlowski]

On Wed, Aug 20, 2025 at 02:12:51PM -0300, Ariel D'Alessandro wrote:
> Current, the DT bindings for MediaTek mmsys controller is missing the
> assigned-clocks and assigned-clocks-rates properties. Add these and

No, they do not miss them. I don't understand why you are adding these.

> update the example as well.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> index 3f4262e93c789..d045d366eb8e2 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> @@ -68,6 +68,12 @@ properties:
>        of the power controller specified by phandle. See
>        Documentation/devicetree/bindings/power/power-domain.yaml for details.
>  
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-rates:
> +    maxItems: 1
> +

Drop both, completely redundant and not actually in the scope of the binding.

Best regards,
Krzysztof

[PATCH v1 04/14] net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for Marvell 8897/8997
(sd8897/sd8997) bluetooth devices controller to a YAML schema.

While here, bindings for "usb1286,204e" (USB interface) are dropped from
the YAML definition as these are currently documented in file:

- Documentation/devicetree/bindings/net/btusb.txt

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/net/marvell,sd8897-bt.yaml       | 91 +++++++++++++++++++
 .../bindings/net/marvell-bt-8xxx.txt          | 83 -----------------
 2 files changed, 91 insertions(+), 83 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt

diff --git a/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
new file mode 100644
index 0000000000000..6539868c08b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,sd8897-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO)
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - marvell,sd8897-bt
+      - marvell,sd8997-bt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  marvell,cal-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Calibration data downloaded to the device during initialization.
+    minItems: 28
+
+  marvell,wakeup-pin:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host
+      system.
+
+  marvell,wakeup-gap-ms:
+    description:
+      Wakeup latency of the host platform. Required by the chip sleep feature.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    sdio0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        btmrvl: btmrvl@2 {
+            compatible = "marvell,sd8897-bt";
+            reg = <2>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+            marvell,wakeup-pin = /bits/ 16 <13>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&bt_host_wake_l>;
+        };
+    };
+
+    mmc3 {
+        vmmc-supply = <&wlan_en_reg>;
+        bus-width = <4>;
+        cap-power-off-card;
+        keep-power-in-suspend;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bluetooth: bluetooth@2 {
+            compatible = "marvell,sd8897-bt";
+            reg = <2>;
+            interrupt-parent = <&pio>;
+            interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+            marvell,cal-data = /bits/ 8 <
+                0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+                0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+                0x00 0x00 0xf0 0x00>;
+            marvell,wakeup-pin = /bits/ 16 <0x0d>;
+            marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
deleted file mode 100644
index 957e5e5c2927c..0000000000000
--- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based)
-------
-The 8997 devices supports multiple interfaces. When used on SDIO interfaces,
-the btmrvl driver is used and when used on USB interface, the btusb driver is
-used.
-
-Required properties:
-
-  - compatible : should be one of the following:
-	* "marvell,sd8897-bt" (for SDIO)
-	* "marvell,sd8997-bt" (for SDIO)
-	* "usb1286,204e"      (for USB)
-
-Optional properties:
-
-  - marvell,cal-data: Calibration data downloaded to the device during
-		      initialization. This is an array of 28 values(u8).
-		      This is only applicable to SDIO devices.
-
-  - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
-		        firmware will use the pin to wakeup host system (u16).
-  - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
-		      platform. The value will be configured to firmware. This
-		      is needed to work chip's sleep feature as expected (u16).
-  - interrupt-names: Used only for USB based devices (See below)
-  - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
-		 driver will use the first interrupt specified in the interrupt
-		 array. For USB based devices, the driver will use the interrupt
-		 named "wakeup" from the interrupt-names and interrupt arrays.
-		 The driver will request an irq based on this interrupt number.
-		 During system suspend, the irq will be enabled so that the
-		 bluetooth chip can wakeup host platform under certain
-		 conditions. During system resume, the irq will be disabled
-		 to make sure unnecessary interrupt is not received.
-
-Example:
-
-IRQ pin 119 is used as system wakeup source interrupt.
-wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host
-using this device side pin and wakeup latency.
-
-Example for SDIO device follows (calibration data is also available in
-below example).
-
-&mmc3 {
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	btmrvl: bluetooth@2 {
-		compatible = "marvell,sd8897-bt";
-		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
-
-		marvell,cal-data = /bits/ 8 <
-			0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
-			0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
-			0x00 0x00 0xf0 0x00>;
-		marvell,wakeup-pin = /bits/ 16 <0x0d>;
-		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
-	};
-};
-
-Example for USB device:
-
-&usb_host1_ohci {
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    mvl_bt1: bt@1 {
-	compatible = "usb1286,204e";
-	reg = <1>;
-	interrupt-parent = <&gpio0>;
-	interrupt-names = "wakeup";
-	interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
-	marvell,wakeup-pin = /bits/ 16 <0x0d>;
-	marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
-    };
-};
-- 
2.50.1

Re: [PATCH v1 04/14] net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML

[Rob Herring (Arm)]

On Wed, 20 Aug 2025 14:12:52 -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for Marvell 8897/8997
> (sd8897/sd8997) bluetooth devices controller to a YAML schema.
> 
> While here, bindings for "usb1286,204e" (USB interface) are dropped from
> the YAML definition as these are currently documented in file:
> 
> - Documentation/devicetree/bindings/net/btusb.txt
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/net/marvell,sd8897-bt.yaml       | 91 +++++++++++++++++++
>  .../bindings/net/marvell-bt-8xxx.txt          | 83 -----------------
>  2 files changed, 91 insertions(+), 83 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml: marvell,wakeup-gap-ms: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/marvell,sd8897-bt.example.dtb: bluetooth@2 (marvell,sd8897-bt): marvell,wakeup-gap-ms: b'\x00d' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#

doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/net/btusb.txt references a file that doesn't exist: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
Documentation/devicetree/bindings/net/btusb.txt: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250820171302.324142-5-ariel.dalessandro@collabora.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v1 04/14] net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML

[Rob Herring]

On Wed, Aug 20, 2025 at 12:15 PM Ariel D'Alessandro
<ariel.dalessandro@collabora.com> wrote:
>
> Convert the existing text-based DT bindings for Marvell 8897/8997
> (sd8897/sd8997) bluetooth devices controller to a YAML schema.
>
> While here, bindings for "usb1286,204e" (USB interface) are dropped from
> the YAML definition as these are currently documented in file:
>
> - Documentation/devicetree/bindings/net/btusb.txt
>
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/net/marvell,sd8897-bt.yaml       | 91 +++++++++++++++++++

This needs to move to net/bluetooth/

>  .../bindings/net/marvell-bt-8xxx.txt          | 83 -----------------
>  2 files changed, 91 insertions(+), 83 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
>
> diff --git a/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
> new file mode 100644
> index 0000000000000..6539868c08b8a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/marvell,sd8897-bt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO)
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +

Needs a $ref to bluetooth-controller.yaml

> +properties:
> +  compatible:
> +    enum:
> +      - marvell,sd8897-bt
> +      - marvell,sd8997-bt
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  marvell,cal-data:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    description:
> +      Calibration data downloaded to the device during initialization.
> +    minItems: 28

Just: maxItems: 28

> +
> +  marvell,wakeup-pin:
> +    $ref: /schemas/types.yaml#/definitions/uint16
> +    description:
> +      Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host
> +      system.
> +
> +  marvell,wakeup-gap-ms:

This unfortunately needs a uint16 type. That will cause a warning
which has to be fixed on the dtschema side.

> +    description:
> +      Wakeup latency of the host platform. Required by the chip sleep feature.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/pinctrl/rockchip.h>

Please drop this and just use a number below.

> +
> +    sdio0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        btmrvl: btmrvl@2 {
> +            compatible = "marvell,sd8897-bt";
> +            reg = <2>;
> +            interrupt-parent = <&gpio4>;
> +            interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
> +            marvell,wakeup-pin = /bits/ 16 <13>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&bt_host_wake_l>;
> +        };
> +    };

I would drop this example.

> +
> +    mmc3 {

mmc {

> +        vmmc-supply = <&wlan_en_reg>;
> +        bus-width = <4>;
> +        cap-power-off-card;
> +        keep-power-in-suspend;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        bluetooth: bluetooth@2 {

Drop the label.

> +            compatible = "marvell,sd8897-bt";
> +            reg = <2>;
> +            interrupt-parent = <&pio>;
> +            interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
> +
> +            marvell,cal-data = /bits/ 8 <
> +                0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> +                0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> +                0x00 0x00 0xf0 0x00>;
> +            marvell,wakeup-pin = /bits/ 16 <0x0d>;
> +            marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
> +        };
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
> deleted file mode 100644
> index 957e5e5c2927c..0000000000000
> --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
> +++ /dev/null
> @@ -1,83 +0,0 @@
> -Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based)
> -------
> -The 8997 devices supports multiple interfaces. When used on SDIO interfaces,
> -the btmrvl driver is used and when used on USB interface, the btusb driver is
> -used.
> -
> -Required properties:
> -
> -  - compatible : should be one of the following:
> -       * "marvell,sd8897-bt" (for SDIO)
> -       * "marvell,sd8997-bt" (for SDIO)
> -       * "usb1286,204e"      (for USB)
> -
> -Optional properties:
> -
> -  - marvell,cal-data: Calibration data downloaded to the device during
> -                     initialization. This is an array of 28 values(u8).
> -                     This is only applicable to SDIO devices.
> -
> -  - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
> -                       firmware will use the pin to wakeup host system (u16).
> -  - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
> -                     platform. The value will be configured to firmware. This
> -                     is needed to work chip's sleep feature as expected (u16).
> -  - interrupt-names: Used only for USB based devices (See below)
> -  - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
> -                driver will use the first interrupt specified in the interrupt
> -                array. For USB based devices, the driver will use the interrupt
> -                named "wakeup" from the interrupt-names and interrupt arrays.
> -                The driver will request an irq based on this interrupt number.
> -                During system suspend, the irq will be enabled so that the
> -                bluetooth chip can wakeup host platform under certain
> -                conditions. During system resume, the irq will be disabled
> -                to make sure unnecessary interrupt is not received.
> -
> -Example:
> -
> -IRQ pin 119 is used as system wakeup source interrupt.
> -wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host
> -using this device side pin and wakeup latency.
> -
> -Example for SDIO device follows (calibration data is also available in
> -below example).
> -
> -&mmc3 {
> -       vmmc-supply = <&wlan_en_reg>;
> -       bus-width = <4>;
> -       cap-power-off-card;
> -       keep-power-in-suspend;
> -
> -       #address-cells = <1>;
> -       #size-cells = <0>;
> -       btmrvl: bluetooth@2 {
> -               compatible = "marvell,sd8897-bt";
> -               reg = <2>;
> -               interrupt-parent = <&pio>;
> -               interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
> -
> -               marvell,cal-data = /bits/ 8 <
> -                       0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> -                       0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> -                       0x00 0x00 0xf0 0x00>;
> -               marvell,wakeup-pin = /bits/ 16 <0x0d>;
> -               marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
> -       };
> -};
> -
> -Example for USB device:
> -
> -&usb_host1_ohci {
> -    #address-cells = <1>;
> -    #size-cells = <0>;
> -
> -    mvl_bt1: bt@1 {
> -       compatible = "usb1286,204e";
> -       reg = <1>;
> -       interrupt-parent = <&gpio0>;
> -       interrupt-names = "wakeup";
> -       interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
> -       marvell,wakeup-pin = /bits/ 16 <0x0d>;
> -       marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
> -    };
> -};
> --
> 2.50.1
>

[PATCH v1 05/14] sound: dt-bindings: Convert MediaTek RT5650 codecs bindings to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for Mediatek MT8173 RT5650
codecs to a YAML schema.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../sound/mediatek,mt8173-rt5650.yaml         | 73 +++++++++++++++++++
 .../bindings/sound/mt8173-rt5650.txt          | 31 --------
 2 files changed, 73 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/mt8173-rt5650.txt

diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
new file mode 100644
index 0000000000000..36e4f9c4c3d62
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8173-rt5650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8173 with RT5650 codecs and HDMI via I2S
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+  compatible:
+    const: "mediatek,mt8173-rt5650"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  mediatek,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The phandles of rt5650 codecs and of the HDMI encoder node.
+    minItems: 2
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of MT8173 ASoC platform.
+
+  mediatek,mclk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The MCLK source.
+      0: external oscillator, MCLK = 12.288M
+      1: internal source from mt8173, MCLK = sampling rate * 256
+
+  codec-capture:
+    description: Subnode of rt5650 codec capture.
+    type: object
+
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle of the CPU DAI
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,audio-codec
+  - mediatek,platform
+
+additionalProperties: false
+
+examples:
+  - |
+    sound: sound {
+        compatible = "mediatek,mt8173-rt5650";
+        mediatek,audio-codec = <&rt5650 &hdmi0>;
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_i2s2>;
+
+        mediatek,mclk = <1>;
+        codec-capture {
+            sound-dai = <&rt5650 1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
deleted file mode 100644
index 29dce2ac8773a..0000000000000
--- a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-MT8173 with RT5650 CODECS and HDMI via I2S
-
-Required properties:
-- compatible : "mediatek,mt8173-rt5650"
-- mediatek,audio-codec: the phandles of rt5650 codecs
-                        and of the hdmi encoder node
-- mediatek,platform: the phandle of MT8173 ASoC platform
-
-Optional subnodes:
-- codec-capture : the subnode of rt5650 codec capture
-Required codec-capture subnode properties:
-- sound-dai: audio codec dai name on capture path
-  <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
-  <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
-
-- mediatek,mclk: the MCLK source
-  0 : external oscillator, MCLK = 12.288M
-  1 : internal source from mt8173, MCLK = sampling rate*256
-
-Example:
-
-	sound {
-		compatible = "mediatek,mt8173-rt5650";
-		mediatek,audio-codec = <&rt5650 &hdmi0>;
-		mediatek,platform = <&afe>;
-		mediatek,mclk = <0>;
-		codec-capture {
-			sound-dai = <&rt5650 1>;
-		};
-	};
-
-- 
2.50.1

Re: [PATCH v1 05/14] sound: dt-bindings: Convert MediaTek RT5650 codecs bindings to YAML

[Rob Herring]

On Wed, Aug 20, 2025 at 02:12:53PM -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for Mediatek MT8173 RT5650
> codecs to a YAML schema.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../sound/mediatek,mt8173-rt5650.yaml         | 73 +++++++++++++++++++
>  .../bindings/sound/mt8173-rt5650.txt          | 31 --------
>  2 files changed, 73 insertions(+), 31 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
> new file mode 100644
> index 0000000000000..36e4f9c4c3d62
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/mediatek,mt8173-rt5650.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT8173 with RT5650 codecs and HDMI via I2S
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +
> +properties:
> +  compatible:
> +    const: "mediatek,mt8173-rt5650"

Drop quotes.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  mediatek,audio-codec:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      The phandles of rt5650 codecs and of the HDMI encoder node.
> +    minItems: 2
> +
> +  mediatek,platform:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      The phandle of MT8173 ASoC platform.
> +
> +  mediatek,mclk:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      The MCLK source.
> +      0: external oscillator, MCLK = 12.288M
> +      1: internal source from mt8173, MCLK = sampling rate * 256
> +
> +  codec-capture:
> +    description: Subnode of rt5650 codec capture.
> +    type: object
> +
> +    properties:
> +      sound-dai:
> +        maxItems: 1
> +        description: phandle of the CPU DAI
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - mediatek,audio-codec
> +  - mediatek,platform
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    sound: sound {

Drop unused label.

> +        compatible = "mediatek,mt8173-rt5650";
> +        mediatek,audio-codec = <&rt5650 &hdmi0>;
> +        mediatek,platform = <&afe>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&aud_i2s2>;
> +
> +        mediatek,mclk = <1>;
> +        codec-capture {
> +            sound-dai = <&rt5650 1>;
> +        };
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
> deleted file mode 100644
> index 29dce2ac8773a..0000000000000
> --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -MT8173 with RT5650 CODECS and HDMI via I2S
> -
> -Required properties:
> -- compatible : "mediatek,mt8173-rt5650"
> -- mediatek,audio-codec: the phandles of rt5650 codecs
> -                        and of the hdmi encoder node
> -- mediatek,platform: the phandle of MT8173 ASoC platform
> -
> -Optional subnodes:
> -- codec-capture : the subnode of rt5650 codec capture
> -Required codec-capture subnode properties:
> -- sound-dai: audio codec dai name on capture path
> -  <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
> -  <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
> -
> -- mediatek,mclk: the MCLK source
> -  0 : external oscillator, MCLK = 12.288M
> -  1 : internal source from mt8173, MCLK = sampling rate*256
> -
> -Example:
> -
> -	sound {
> -		compatible = "mediatek,mt8173-rt5650";
> -		mediatek,audio-codec = <&rt5650 &hdmi0>;
> -		mediatek,platform = <&afe>;
> -		mediatek,mclk = <0>;
> -		codec-capture {
> -			sound-dai = <&rt5650 1>;
> -		};
> -	};
> -
> -- 
> 2.50.1
> 

[PATCH v1 06/14] dt-bindings: display: mediatek,od: Add mediatek,gce-client-reg property

[Ariel D'Alessandro]

Current, the DT bindings for Mediatek OD (display overdrive) is missing
the mediatek,gce-client-reg property. Add it and update the example as
well.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/display/mediatek/mediatek,od.yaml         | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 71534febd49c6..d5b42a4bba190 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -60,6 +60,14 @@ properties:
       - port@0
       - port@1
 
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +78,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
 
     soc {
         #address-cells = <2>;
@@ -79,5 +88,6 @@ examples:
             compatible = "mediatek,mt8173-disp-od";
             reg = <0 0x14023000 0 0x1000>;
             clocks = <&mmsys CLK_MM_DISP_OD>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
         };
     };
-- 
2.50.1

[PATCH v1 07/14] dt-bindings: display: mediatek,ufoe: Add mediatek,gce-client-reg property

[Ariel D'Alessandro]

Current, the DT bindings for Mediatek UFOe (Unified Frame Optimization
engine) is missing the mediatek,gce-client-reg property. Add it and
update the example as well.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/display/mediatek/mediatek,ufoe.yaml      | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 61a5e22effbf2..ecb4c0359fec3 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -64,6 +64,14 @@ properties:
       - port@0
       - port@1
 
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -77,7 +85,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
     #include <dt-bindings/power/mt8173-power.h>
+
     soc {
         #address-cells = <2>;
         #size-cells = <2>;
@@ -88,5 +98,6 @@ examples:
             interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
             power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
             clocks = <&mmsys CLK_MM_DISP_UFOE>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
         };
     };
-- 
2.50.1

Re: [PATCH v1 07/14] dt-bindings: display: mediatek,ufoe: Add mediatek,gce-client-reg property

[Krzysztof Kozlowski]

On Wed, Aug 20, 2025 at 02:12:55PM -0300, Ariel D'Alessandro wrote:
> Current, the DT bindings for Mediatek UFOe (Unified Frame Optimization
> engine) is missing the mediatek,gce-client-reg property. Add it and

Why is it missing? If the binding is complete, it cannot be missing...

> update the example as well.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/display/mediatek/mediatek,ufoe.yaml      | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
> index 61a5e22effbf2..ecb4c0359fec3 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
> @@ -64,6 +64,14 @@ properties:
>        - port@0
>        - port@1
>  
> +  mediatek,gce-client-reg:
> +    description: The register of client driver can be configured by gce with
> +      4 arguments defined in this property, such as phandle of gce, subsys id,
> +      register offset and size. Each GCE subsys id is mapping to a client

Don't explain what DT syntax is. We all know, so that's completely
redundant description. Explain the purpose. Explain Arguments with sechema - items.

Best regards,
Krzysztof

[PATCH v1 08/14] arm64: dts: mediatek: mt8173: Fix mt8173-pinctrl node names

[Ariel D'Alessandro]

According to the mediatek,mt8173-pinctrl device tree binding schema, the
pinctrl node names should match pattern 'pins$'. Fix this.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../boot/dts/mediatek/mt8173-elm-hana.dtsi    |  2 +-
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi  | 26 +++++++++----------
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts   | 14 +++++-----
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 14 +++++-----
 4 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index dfc5c2f0ddefd..7d665cedf8a44 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -80,7 +80,7 @@ pins2 {
 		};
 	};
 
-	mmc1_pins_default: mmc1default {
+	mmc1_pins_default: mmc1_default_pins {
 		pins_wp {
 			pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 0d995b342d463..0766026864c9d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -601,7 +601,7 @@ &pio {
 			  "SOC_I2C4_1V8_SDA_400K",
 			  "SOC_I2C4_1V8_SCL_400K";
 
-	aud_i2s2: aud_i2s2 {
+	aud_i2s2: aud_i2s2_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
 				 <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
@@ -654,14 +654,14 @@ pins1 {
 		};
 	};
 
-	i2c1_pins_a: i2c1 {
+	i2c1_pins_a: i2c1_pins {
 		da9211_pins {
 			pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
 			bias-pull-up;
 		};
 	};
 
-	mmc0_pins_default: mmc0default {
+	mmc0_pins_default: mmc0_default_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
 				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
@@ -686,7 +686,7 @@ pins_rst {
 		};
 	};
 
-	mmc1_pins_default: mmc1default {
+	mmc1_pins_default: mmc1_default_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
 				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
@@ -710,7 +710,7 @@ pins_insert {
 		};
 	};
 
-	mmc3_pins_default: mmc3default {
+	mmc3_pins_default: mmc3_default_pins {
 		pins_dat {
 			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
 				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
@@ -735,7 +735,7 @@ pins_clk {
 		};
 	};
 
-	mmc0_pins_uhs: mmc0 {
+	mmc0_pins_uhs: mmc0_uhs_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
 				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
@@ -769,7 +769,7 @@ pins_rst {
 		};
 	};
 
-	mmc1_pins_uhs: mmc1 {
+	mmc1_pins_uhs: mmc1_uhs_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
 				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
@@ -788,7 +788,7 @@ pins_clk {
 		};
 	};
 
-	mmc3_pins_uhs: mmc3 {
+	mmc3_pins_uhs: mmc3_uhs_pins {
 		pins_dat {
 			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
 				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
@@ -813,7 +813,7 @@ pins_clk {
 		};
 	};
 
-	nor_gpio1_pins: nor {
+	nor_gpio1_pins: nor_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
 				 <MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
@@ -863,7 +863,7 @@ pins1 {
 		};
 	};
 
-	rt5650_irq: rt5650_irq {
+	rt5650_irq: rt5650_irq_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
 			bias-pull-down;
@@ -877,7 +877,7 @@ pins1 {
 		};
 	};
 
-	spi_pins_a: spi1 {
+	spi_pins_a: spi1_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
 			bias-pull-up;
@@ -892,7 +892,7 @@ pins_spi {
 		};
 	};
 
-	trackpad_irq: trackpad_irq {
+	trackpad_irq: trackpad_irq_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
 			input-enable;
@@ -900,7 +900,7 @@ pins1 {
 		};
 	};
 
-	usb_pins: usb {
+	usb_pins: usb_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
 			output-high;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 9fffed0ef4bff..f28110c331c71 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -179,7 +179,7 @@ pins1 {
 		};
 	};
 
-	mmc0_pins_default: mmc0default {
+	mmc0_pins_default: mmc0_default_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
 				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
@@ -205,7 +205,7 @@ pins_rst {
 		};
 	};
 
-	mmc1_pins_default: mmc1default {
+	mmc1_pins_default: mmc1_default_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
 				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
@@ -229,7 +229,7 @@ pins_insert {
 		};
 	};
 
-	mmc0_pins_uhs: mmc0 {
+	mmc0_pins_uhs: mmc0_uhs_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
 				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
@@ -257,7 +257,7 @@ pins_rst {
 		};
 	};
 
-	mmc1_pins_uhs: mmc1 {
+	mmc1_pins_uhs: mmc1_uhs_pins {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
 				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
@@ -276,14 +276,14 @@ pins_clk {
 		};
 	};
 
-	usb_id_pins_float: usb_iddig_pull_up {
+	usb_id_pins_float: usb_iddig_pull_up_pins {
 		pins_iddig {
 			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
 			bias-pull-up;
 		};
 	};
 
-	usb_id_pins_ground: usb_iddig_pull_down {
+	usb_id_pins_ground: usb_iddig_pull_down_pins {
 		pins_iddig {
 			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
 			bias-pull-down;
@@ -474,7 +474,7 @@ mt6397_vibr_reg: ldo_vibr {
 };
 
 &pio {
-	spi_pins_a: spi0 {
+	spi_pins_a: spi0_pins {
 		pins_spi {
 			pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
 				<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 122a57c3780b6..7e522bb8963a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -391,7 +391,7 @@ pio: pinctrl@1000b000 {
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 
-			hdmi_pin: xxx {
+			hdmi_pin: hdmi_pins {
 
 				/*hdmi htplg pin*/
 				pins1 {
@@ -401,7 +401,7 @@ pins1 {
 				};
 			};
 
-			i2c0_pins_a: i2c0 {
+			i2c0_pins_a: i2c0_pins {
 				pins1 {
 					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
 						 <MT8173_PIN_46_SCL0__FUNC_SCL0>;
@@ -409,7 +409,7 @@ pins1 {
 				};
 			};
 
-			i2c1_pins_a: i2c1 {
+			i2c1_pins_a: i2c1_pins {
 				pins1 {
 					pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
 						 <MT8173_PIN_126_SCL1__FUNC_SCL1>;
@@ -417,7 +417,7 @@ pins1 {
 				};
 			};
 
-			i2c2_pins_a: i2c2 {
+			i2c2_pins_a: i2c2_pins  {
 				pins1 {
 					pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
 						 <MT8173_PIN_44_SCL2__FUNC_SCL2>;
@@ -425,7 +425,7 @@ pins1 {
 				};
 			};
 
-			i2c3_pins_a: i2c3 {
+			i2c3_pins_a: i2c3_pins  {
 				pins1 {
 					pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
 						 <MT8173_PIN_107_SCL3__FUNC_SCL3>;
@@ -433,7 +433,7 @@ pins1 {
 				};
 			};
 
-			i2c4_pins_a: i2c4 {
+			i2c4_pins_a: i2c4_pins  {
 				pins1 {
 					pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
 						 <MT8173_PIN_134_SCL4__FUNC_SCL4>;
@@ -441,7 +441,7 @@ pins1 {
 				};
 			};
 
-			i2c6_pins_a: i2c6 {
+			i2c6_pins_a: i2c6_pins  {
 				pins1 {
 					pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
 						 <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
-- 
2.50.1

[PATCH v1 09/14] dt-bindings: pinctrl: mediatek,mt65xx-pinctrl: Allow gpio-line-names

[Ariel D'Alessandro]

Current, the DT bindings for MediaTek's MT65xx Pin controller is missing
the gpio-line-names property, add it to the associated schema.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml    | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index b9680b896f12f..aa71398cf522f 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -43,6 +43,8 @@ properties:
       the amount of cells must be specified as 2. See the below mentioned gpio
       binding representation for description of particular cells.
 
+  gpio-line-names: true
+
   mediatek,pctl-regmap:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-- 
2.50.1

Re: [PATCH v1 09/14] dt-bindings: pinctrl: mediatek,mt65xx-pinctrl: Allow gpio-line-names

[Linus Walleij]

On Wed, Aug 20, 2025 at 7:16 PM Ariel D'Alessandro
<ariel.dalessandro@collabora.com> wrote:

> Current, the DT bindings for MediaTek's MT65xx Pin controller is missing
> the gpio-line-names property, add it to the associated schema.
>
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH v1 09/14] dt-bindings: pinctrl: mediatek,mt65xx-pinctrl: Allow gpio-line-names

[Rob Herring (Arm)]

On Wed, 20 Aug 2025 14:12:57 -0300, Ariel D'Alessandro wrote:
> Current, the DT bindings for MediaTek's MT65xx Pin controller is missing
> the gpio-line-names property, add it to the associated schema.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml    | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v1 10/14] regulator: dt-bindings: Convert Dialog Semiconductor DA9211 Regulators to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for Dialog Semiconductor DA9211
Voltage Regulators family to a YAML schema. Examples are simplified, as
these are all equal.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../devicetree/bindings/regulator/da9211.txt  | 205 ------------------
 .../bindings/regulator/dlg,da9211.yaml        | 104 +++++++++
 2 files changed, 104 insertions(+), 205 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9211.yaml

diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
deleted file mode 100644
index eb871447d5082..0000000000000
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
- Voltage Regulator
-
-Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
-  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
-- reg: I2C slave address, usually 0x68.
-- interrupts: the interrupt outputs of the controller
-- regulators: A node that houses a sub-node for each regulator within the
-  device. Each sub-node is identified using the node's name, with valid
-  values listed below. The content of each sub-node is defined by the
-  standard binding for regulators; see regulator.txt.
-  BUCKA and BUCKB.
-
-Optional properties:
-- enable-gpios: platform gpio for control of BUCKA/BUCKB.
-- Any optional property defined in regulator.txt
-  - regulator-initial-mode and regulator-allowed-modes may be specified using
-    mode values from dt-bindings/regulator/dlg,da9211-regulator.h
-
-Example 1) DA9211
-	pmic: da9211@68 {
-		compatible = "dlg,da9211";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 27 0>;
-				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
-							   DA9211_BUCK_MODE_AUTO>;
-			};
-		};
-	};
-
-Example 2) DA9212
-	pmic: da9212@68 {
-		compatible = "dlg,da9212";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 3) DA9213
-	pmic: da9213@68 {
-		compatible = "dlg,da9213";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-		};
-	};
-
-Example 4) DA9223
-	pmic: da9223@68 {
-		compatible = "dlg,da9223";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-		};
-	};
-
-Example 5) DA9214
-	pmic: da9214@68 {
-		compatible = "dlg,da9214";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 6) DA9224
-	pmic: da9224@68 {
-		compatible = "dlg,da9224";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 7) DA9215
-	pmic: da9215@68 {
-		compatible = "dlg,da9215";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 8) DA9225
-	pmic: da9225@68 {
-		compatible = "dlg,da9225";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
new file mode 100644
index 0000000000000..d4c5b354497f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+  Voltage Regulator
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - "dlg,da9211"
+      - "dlg,da9212"
+      - "dlg,da9213"
+      - "dlg,da9223"
+      - "dlg,da9214"
+      - "dlg,da9224"
+      - "dlg,da9215"
+      - "dlg,da9225"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of regulators provided by the device
+
+    patternProperties:
+      "^BUCK([A-B])$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for a single BUCK regulator
+
+        properties:
+          regulator-initial-mode:
+            items:
+              enum: [ 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+          regulator-allowed-modes:
+            items:
+              enum: [ 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+          enable-gpios:
+            maxItems: 1
+            description: Specify a valid GPIO for platform control of the regulator
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/dlg,da9211-regulator.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        da9212: da9212@68 {
+            compatible = "dlg,da9212";
+            reg = <0x68>;
+            interrupts = <3 27>;
+
+            regulators {
+                BUCKA {
+                    regulator-name = "VBUCKA";
+                    regulator-min-microvolt = < 300000>;
+                    regulator-max-microvolt = <1570000>;
+                    regulator-min-microamp = <2000000>;
+                    regulator-max-microamp = <5000000>;
+                    enable-gpios = <&gpio 27 0>;
+                };
+                BUCKB {
+                    regulator-name = "VBUCKB";
+                    regulator-min-microvolt = < 300000>;
+                    regulator-max-microvolt = <1570000>;
+                    regulator-min-microamp = <2000000>;
+                    regulator-max-microamp = <5000000>;
+                    enable-gpios = <&gpio 17 0>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.50.1

Re: [PATCH v1 10/14] regulator: dt-bindings: Convert Dialog Semiconductor DA9211 Regulators to YAML

[Krzysztof Kozlowski]

On Wed, Aug 20, 2025 at 02:12:58PM -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for Dialog Semiconductor DA9211
> Voltage Regulators family to a YAML schema. Examples are simplified, as
> these are all equal.

Also not wrapped... fix your editor to recognize how commits are
written.

> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---

...

> +---
> +$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: |

Drop |

> +  Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
> +  Voltage Regulator
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - "dlg,da9211"
> +      - "dlg,da9212"
> +      - "dlg,da9213"
> +      - "dlg,da9223"
> +      - "dlg,da9214"
> +      - "dlg,da9224"
> +      - "dlg,da9215"
> +      - "dlg,da9225"

No quotes. I don't think this was ever tested.

Also, keep it properly ordered


> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  regulators:
> +    type: object
> +    additionalProperties: false
> +    description: |

Drop |

> +      List of regulators provided by the device
> +
> +    patternProperties:
> +      "^BUCK([A-B])$":

[AB]

> +        type: object
> +        $ref: regulator.yaml#
> +        description: |
> +          Properties for a single BUCK regulator
> +
> +        properties:
> +          regulator-initial-mode:
> +            items:
> +              enum: [ 1, 2, 3 ]
> +            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
> +
> +          regulator-allowed-modes:
> +            items:
> +              enum: [ 1, 2, 3 ]
> +            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
> +
> +          enable-gpios:
> +            maxItems: 1
> +            description: Specify a valid GPIO for platform control of the regulator

Drop description, obvious.

> +
> +        unevaluatedProperties: false

For nested blocks this goes after $ref: regulator.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/regulator/dlg,da9211-regulator.h>
> +
> +    i2c1 {

i2c

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        da9212: da9212@68 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


Best regards,
Krzysztof

[PATCH v1 11/14] arm64: dts: mediatek: mt8173-elm: Drop unused bank supply

[Ariel D'Alessandro]

The mediatek,mt8173-thermal device tree binding schema doesn't allow
regulator supplies like the ones defined in mt8173-elm.dtsi. Drop these
as the associated driver doesn't implement them either.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 0766026864c9d..b6fe979fcfb10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -1149,11 +1149,6 @@ &ssusb {
 	status = "okay";
 };
 
-&thermal {
-	bank0-supply = <&mt6397_vpca15_reg>;
-	bank1-supply = <&da9211_vcpu_reg>;
-};
-
 &uart0 {
 	status = "okay";
 };
-- 
2.50.1

[PATCH v1 12/14] dt-bindings: soc: mediatek: pwrap: Add power-domains property

[Ariel D'Alessandro]

Currently, the DT bindings for Mediatek PMIC Wrapper is missing the
power-domains property, which is used in the MT8173 E1 evaluation board
as it needs USB power domain.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../bindings/soc/mediatek/mediatek,pwrap.yaml     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
index 4737e5f45d541..54c0cd64d3094 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -98,6 +98,9 @@ properties:
       - const: pwrap
       - const: pwrap-bridge
 
+  power-domains:
+    maxItems: 1
+
   pmic:
     type: object
 
@@ -126,6 +129,18 @@ allOf:
         clock-names:
           minItems: 4
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-pwrap
+    then:
+      properties:
+        power-domains: true
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
-- 
2.50.1

Re: [PATCH v1 12/14] dt-bindings: soc: mediatek: pwrap: Add power-domains property

[Rob Herring (Arm)]

On Wed, 20 Aug 2025 14:13:00 -0300, Ariel D'Alessandro wrote:
> Currently, the DT bindings for Mediatek PMIC Wrapper is missing the
> power-domains property, which is used in the MT8173 E1 evaluation board
> as it needs USB power domain.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../bindings/soc/mediatek/mediatek,pwrap.yaml     | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v1 13/14] dt-bindings: input/touchscreen: Convert MELFAS MIP4 Touchscreen to YAML

[Ariel D'Alessandro]

Convert the existing text-based DT bindings for MELFAS MIP4 Touchscreen
controller to a YAML schema.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../input/touchscreen/melfas,mip4_ts.yaml     | 55 +++++++++++++++++++
 .../input/touchscreen/melfas_mip4.txt         | 20 -------
 2 files changed, 55 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
new file mode 100644
index 0000000000000..170fd4212467e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/melfas,mip4_ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MELFAS MIP4 Touchscreen
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+  compatible:
+    const: "melfas,mip4_ts"
+
+  reg:
+    description: I2C address of the chip (0x48 or 0x34)
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ce-gpios:
+    description: GPIO connected to the CE (chip enable) pin of the chip
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@34 {
+            compatible = "melfas,mip4_ts";
+            reg = <0x34>;
+
+            interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+            ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+            pinctrl-0 = <&touchscreen_default>;
+            pinctrl-names = "default";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
deleted file mode 100644
index b2ab5498e5190..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* MELFAS MIP4 Touchscreen
-
-Required properties:
-- compatible: must be "melfas,mip4_ts"
-- reg: I2C slave address of the chip (0x48 or 0x34)
-- interrupts: interrupt to which the chip is connected
-
-Optional properties:
-- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
-
-Example:
-	i2c@00000000 {
-		touchscreen: melfas_mip4@48 {
-			compatible = "melfas,mip4_ts";
-			reg = <0x48>;
-			interrupt-parent = <&gpio>;
-			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-			ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-- 
2.50.1

Re: [PATCH v1 13/14] dt-bindings: input/touchscreen: Convert MELFAS MIP4 Touchscreen to YAML

[Linus Walleij]

Hi Ariel,

thanks for your patch!

On Wed, Aug 20, 2025 at 7:17 PM Ariel D'Alessandro
<ariel.dalessandro@collabora.com> wrote:

> +  ce-gpios:
> +    description: GPIO connected to the CE (chip enable) pin of the chip
> +    maxItems: 1

Mention that this should always have the flag GPIO_ACTIVE_HIGH
as this is required by the hardware.

Unfortunately we have no YAML syntax for enforcing flags :/

With that fix:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH v1 13/14] dt-bindings: input/touchscreen: Convert MELFAS MIP4 Touchscreen to YAML

[Rob Herring]

On Wed, Aug 20, 2025 at 02:13:01PM -0300, Ariel D'Alessandro wrote:
> Convert the existing text-based DT bindings for MELFAS MIP4 Touchscreen
> controller to a YAML schema.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../input/touchscreen/melfas,mip4_ts.yaml     | 55 +++++++++++++++++++
>  .../input/touchscreen/melfas_mip4.txt         | 20 -------
>  2 files changed, 55 insertions(+), 20 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
> new file mode 100644
> index 0000000000000..170fd4212467e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mip4_ts.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MELFAS MIP4 Touchscreen
> +
> +maintainers:
> +  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> +
> +properties:
> +  compatible:
> +    const: "melfas,mip4_ts"

Drop quotes. With that,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v1 14/14] dt-bindings: media: mediatek,jpeg: Fix jpeg encoder/decoder ranges

[Ariel D'Alessandro]

Commit 14176e94bb35d ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg
enc/decoder nodes") redefined jpeg encoder/decoder children node ranges.
Update the related device tree binding yaml definition to match
mediatek/mt8195.dtsi, as this is currently the only one using it.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../media/mediatek,mt8195-jpegdec.yaml        | 31 ++++++++++---------
 .../media/mediatek,mt8195-jpegenc.yaml        | 15 ++++-----
 2 files changed, 24 insertions(+), 22 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
index e5448c60e3eb5..b1f3df258dc87 100644
--- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -36,7 +36,7 @@ properties:
 
 # Required child node:
 patternProperties:
-  "^jpgdec@[0-9a-f]+$":
+  "^jpgdec@[0-9],[0-9a-f]+$":
     type: object
     description:
       The jpeg decoder hardware device node which should be added as subnodes to
@@ -100,22 +100,23 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        jpgdec-master {
+        jpeg-decoder@1a040000 {
             compatible = "mediatek,mt8195-jpgdec";
             power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
-            iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>,
-                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>,
-                     <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>,
-                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
-                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
-                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+            iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                     <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                     <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                     <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                     <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                     <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
             #address-cells = <2>;
             #size-cells = <2>;
-            ranges;
+            ranges = <0 0 0 0x1a040000 0 0x20000>,
+                     <1 0 0 0x1b040000 0 0x10000>;
 
-            jpgdec@1a040000 {
+            jpgdec@0,0 {
                 compatible = "mediatek,mt8195-jpgdec-hw";
-                reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+                reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
                 iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
                          <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
                          <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -128,9 +129,9 @@ examples:
                 power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
             };
 
-            jpgdec@1a050000 {
+            jpgdec@0,10000 {
                 compatible = "mediatek,mt8195-jpgdec-hw";
-                reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+                reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */
                 iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
                          <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
                          <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -143,9 +144,9 @@ examples:
                 power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
             };
 
-            jpgdec@1b040000 {
+            jpgdec@1,0 {
                 compatible = "mediatek,mt8195-jpgdec-hw";
-                reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+                reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
                 iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
                          <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
                          <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
index 596186497b684..190e4e7470195 100644
--- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -36,7 +36,7 @@ properties:
 
 # Required child node:
 patternProperties:
-  "^jpgenc@[0-9a-f]+$":
+  "^jpgenc@[0-9],[0-9a-f]+$":
     type: object
     description:
       The jpeg encoder hardware device node which should be added as subnodes to
@@ -100,7 +100,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        jpgenc-master {
+        jpeg-encoder@1a030000 {
             compatible = "mediatek,mt8195-jpgenc";
             power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
             iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
@@ -109,11 +109,12 @@ examples:
                      <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
             #address-cells = <2>;
             #size-cells = <2>;
-            ranges;
+            ranges = <0 0 0 0x1a030000 0 0x10000>,
+                     <1 0 0 0x1b030000 0 0x10000>;
 
-            jpgenc@1a030000 {
+            jpgenc@0,0 {
                 compatible = "mediatek,mt8195-jpgenc-hw";
-                reg = <0 0x1a030000 0 0x10000>;
+                reg = <0 0 0 0x10000>;
                 iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
                          <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
                          <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
@@ -124,9 +125,9 @@ examples:
                 power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
             };
 
-            jpgenc@1b030000 {
+            jpgenc@1,0 {
                 compatible = "mediatek,mt8195-jpgenc-hw";
-                reg = <0 0x1b030000 0 0x10000>;
+                reg = <1 0 0 0x10000>;
                 iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
                          <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
                          <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
-- 
2.50.1

Re: [PATCH v1 14/14] dt-bindings: media: mediatek,jpeg: Fix jpeg encoder/decoder ranges

[Rob Herring]

On Wed, Aug 20, 2025 at 02:13:02PM -0300, Ariel D'Alessandro wrote:
> Commit 14176e94bb35d ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg

That commit is not in any upstream tree.

> enc/decoder nodes") redefined jpeg encoder/decoder children node ranges.
> Update the related device tree binding yaml definition to match
> mediatek/mt8195.dtsi, as this is currently the only one using it.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> ---
>  .../media/mediatek,mt8195-jpegdec.yaml        | 31 ++++++++++---------
>  .../media/mediatek,mt8195-jpegenc.yaml        | 15 ++++-----
>  2 files changed, 24 insertions(+), 22 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> index e5448c60e3eb5..b1f3df258dc87 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
> @@ -36,7 +36,7 @@ properties:
>  
>  # Required child node:
>  patternProperties:
> -  "^jpgdec@[0-9a-f]+$":
> +  "^jpgdec@[0-9],[0-9a-f]+$":

This is wrong unless 0-9 is a separate, distinct address (like a chip 
select #).

Rob

Re: [PATCH v1 00/14] MediaTek dt-bindings sanitization (MT8173)

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1001 bytes --]

On Wed, Aug 20, 2025 at 02:12:48PM -0300, Ariel D'Alessandro wrote:
> This patch series continues the effort to address Device Tree validation
> warnings for MediaTek platforms, with a focus on MT8173. It follows the initial
> cleanup series by Angelo (https://www.spinics.net/lists/kernel/msg5780177.html)
> 
> Similarly to the ongoing MT8183 work done by Julien Massot, this patchset
> eliminates several of the remaining warnings by improving or converting DT
> bindings to YAML, adding missing properties, and updating device tree files
> accordingly.

Same question as for that series, what's the story with
interdependencies between the patches?

Please submit patches using subject lines reflecting the style for the
subsystem, this makes it easier for people to identify relevant patches.
Look at what existing commits in the area you're changing are doing and
make sure your subject lines visually resemble what they're doing.
There's no need to resubmit to fix this alone.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v1 00/14] MediaTek dt-bindings sanitization (MT8173)

[Rob Herring (Arm)]

On Wed, 20 Aug 2025 14:12:48 -0300, Ariel D'Alessandro wrote:
> This patch series continues the effort to address Device Tree validation
> warnings for MediaTek platforms, with a focus on MT8173. It follows the initial
> cleanup series by Angelo (https://www.spinics.net/lists/kernel/msg5780177.html)
> 
> Similarly to the ongoing MT8183 work done by Julien Massot, this patchset
> eliminates several of the remaining warnings by improving or converting DT
> bindings to YAML, adding missing properties, and updating device tree files
> accordingly.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> 
> Ariel D'Alessandro (14):
>   media: dt-bindings: Convert MediaTek mt8173-mdp bindings to YAML
>   media: dt-bindings: Convert MediaTek mt8173-vpu bindings to YAML
>   dt-bindings: arm: mediatek: mmsys: Add assigned-clocks/rates
>     properties
>   net: dt-bindings: Convert Marvell 8897/8997 bindings to YAML
>   sound: dt-bindings: Convert MediaTek RT5650 codecs bindings to YAML
>   dt-bindings: display: mediatek,od: Add mediatek,gce-client-reg
>     property
>   dt-bindings: display: mediatek,ufoe: Add mediatek,gce-client-reg
>     property
>   arm64: dts: mediatek: mt8173: Fix mt8173-pinctrl node names
>   dt-bindings: pinctrl: mediatek,mt65xx-pinctrl: Allow gpio-line-names
>   regulator: dt-bindings: Convert Dialog Semiconductor DA9211 Regulators
>     to YAML
>   arm64: dts: mediatek: mt8173-elm: Drop unused bank supply
>   dt-bindings: soc: mediatek: pwrap: Add power-domains property
>   dt-bindings: input/touchscreen: Convert MELFAS MIP4 Touchscreen to
>     YAML
>   dt-bindings: media: mediatek,jpeg: Fix jpeg encoder/decoder ranges
> 
>  .../bindings/arm/mediatek/mediatek,mmsys.yaml |   9 +
>  .../display/mediatek/mediatek,od.yaml         |  10 +
>  .../display/mediatek/mediatek,ufoe.yaml       |  11 +
>  .../input/touchscreen/melfas,mip4_ts.yaml     |  55 +++++
>  .../input/touchscreen/melfas_mip4.txt         |  20 --
>  .../bindings/media/mediatek,mt8173-mdp.yaml   | 174 +++++++++++++++
>  .../bindings/media/mediatek,mt8173-vpu.yaml   |  76 +++++++
>  .../media/mediatek,mt8195-jpegdec.yaml        |  31 +--
>  .../media/mediatek,mt8195-jpegenc.yaml        |  15 +-
>  .../bindings/media/mediatek-mdp.txt           |  95 --------
>  .../bindings/media/mediatek-vpu.txt           |  31 ---
>  .../bindings/net/marvell,sd8897-bt.yaml       |  91 ++++++++
>  .../bindings/net/marvell-bt-8xxx.txt          |  83 -------
>  .../pinctrl/mediatek,mt65xx-pinctrl.yaml      |   2 +
>  .../devicetree/bindings/regulator/da9211.txt  | 205 ------------------
>  .../bindings/regulator/dlg,da9211.yaml        | 104 +++++++++
>  .../bindings/soc/mediatek/mediatek,pwrap.yaml |  15 ++
>  .../sound/mediatek,mt8173-rt5650.yaml         |  73 +++++++
>  .../bindings/sound/mt8173-rt5650.txt          |  31 ---
>  .../boot/dts/mediatek/mt8173-elm-hana.dtsi    |   2 +-
>  arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi  |  31 ++-
>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts   |  14 +-
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  14 +-
>  23 files changed, 672 insertions(+), 520 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp.txt
>  delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,sd8897-bt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
>  delete mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt
>  create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
>  create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt8173-rt5650.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
> 
> --
> 2.50.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/next-20250820 (exact match)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/mediatek/' for 20250820171302.324142-1-ariel.dalessandro@collabora.com:

arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: da9211@68 (dlg,da9211): 'oneOf' conditional failed, one must be fixed:
	'interrupts' is a required property
	'interrupts-extended' is a required property
	from schema $id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml#
arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8195-demo.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-demo.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dtb: pinctrl@10005000 (mediatek,mt8183-pinctrl): mmc1-pins-uhs:pins-clk:mediatek,pull-down-adv: 10 is not one of [0, 1, 2, 3]
	from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dtb: jpgdec-master (mediatek,mt8195-jpgdec): 'jpgdec@1a040000', 'jpgdec@1a050000', 'jpgdec@1b040000' do not match any of the regexes: '^jpgdec@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dtb: jpgenc-master (mediatek,mt8195-jpgenc): 'jpgenc@1a030000', 'jpgenc@1b030000' do not match any of the regexes: '^jpgenc@[0-9],[0-9a-f]+$', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#