[PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[E Shattow]

Describe JH7110 SoC DDR external memory interface.

Signed-off-by: E Shattow <e@freeshell.de>
---
 .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml

diff --git a/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
new file mode 100644
index 000000000000..d65313b33a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/starfive,jh7110-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DMC
+
+maintainers:
+  - E Shattow <e@freeshell.de>
+
+description:
+  JH7110 DDR external memory interface LPDDR4/DDR4/DDR3/LPDDR3 32-bit at
+  2133Mbps (up to 2800Mbps).
+
+properties:
+  compatible:
+    items:
+      - const: starfive,jh7110-dmc
+
+  reg:
+    items:
+      - description: controller registers
+      - description: phy registers
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pll
+
+  resets:
+    items:
+      - description: axi
+      - description: osc
+      - description: apb
+
+  reset-names:
+    items:
+      - const: axi
+      - const: osc
+      - const: apb
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      memory-controller@15700000 {
+        compatible = "starfive,jh7110-dmc";
+        reg = <0x0 0x15700000 0x0 0x10000>,
+              <0x0 0x13000000 0x0 0x10000>;
+        clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+        clock-names = "pll";
+        resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+                 <&syscrg JH7110_SYSRST_DDR_OSC>,
+                 <&syscrg JH7110_SYSRST_DDR_APB>;
+        reset-names = "axi", "osc", "apb";
+      };
+    };
-- 
2.50.0

[PATCH v3 RESEND 0/3] riscv: dts: starfive: jh7110: More U-Boot downstream changes for JH7110

[E Shattow]

Bring in additional downstream U-Boot boot loader changes for StarFive
VisionFive2 board target (and related JH7110 common boards). Create a
basic dt-binding (and not any Linux driver) in support of the
memory-controller dts node used in mainline U-Boot. Also add
bootph-pre-ram hinting to jh7110.dtsi needed at SPL boot phase.

Changes since v2:

- patch 1/3 "add StarFive JH7110 SoC DMC": wrap at 80 col, clock-names
  const is 'pll'.

- patch 2/3 "add memory controller node": memory-controller node follows
  sorting style by reg address, between watchdog and crypto nodes. Update
  clock-names to 'pll'.

- patch 3/3 "bootph-pre-ram hinting needed by boot loader": add missing
  hints for syscrg dependencies 'gmac1_rgmii_rxin', 'gmac1_rmii_refin',
  and 'pllclk'.

E Shattow (3):
  dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC
  riscv: dts: starfive: jh7110: add DMC memory controller
  riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot
    loader

 .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 24 ++++++
 2 files changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml


base-commit: 481ee0fcbb9a0f0706d6d29de9570d1048aff631
-- 
2.50.0

[PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[E Shattow]

Describe JH7110 SoC DDR external memory interface.

Signed-off-by: E Shattow <e@freeshell.de>
---
 .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml

diff --git a/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
new file mode 100644
index 000000000000..d65313b33a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/starfive,jh7110-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DMC
+
+maintainers:
+  - E Shattow <e@freeshell.de>
+
+description:
+  JH7110 DDR external memory interface LPDDR4/DDR4/DDR3/LPDDR3 32-bit at
+  2133Mbps (up to 2800Mbps).
+
+properties:
+  compatible:
+    items:
+      - const: starfive,jh7110-dmc
+
+  reg:
+    items:
+      - description: controller registers
+      - description: phy registers
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pll
+
+  resets:
+    items:
+      - description: axi
+      - description: osc
+      - description: apb
+
+  reset-names:
+    items:
+      - const: axi
+      - const: osc
+      - const: apb
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      memory-controller@15700000 {
+        compatible = "starfive,jh7110-dmc";
+        reg = <0x0 0x15700000 0x0 0x10000>,
+              <0x0 0x13000000 0x0 0x10000>;
+        clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+        clock-names = "pll";
+        resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+                 <&syscrg JH7110_SYSRST_DDR_OSC>,
+                 <&syscrg JH7110_SYSRST_DDR_APB>;
+        reset-names = "axi", "osc", "apb";
+      };
+    };
-- 
2.50.0

[PATCH v3 2/3] riscv: dts: starfive: jh7110: add DMC memory controller

[E Shattow]

Add JH7110 SoC DDR external memory controller.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 0ba74ef04679..f3876660c07f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -931,6 +931,18 @@ watchdog@13070000 {
 				 <&syscrg JH7110_SYSRST_WDT_CORE>;
 		};
 
+		memory-controller@15700000 {
+			compatible = "starfive,jh7110-dmc";
+			reg = <0x0 0x15700000 0x0 0x10000>,
+			      <0x0 0x13000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+			clock-names = "pll";
+			resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+				 <&syscrg JH7110_SYSRST_DDR_OSC>,
+				 <&syscrg JH7110_SYSRST_DDR_APB>;
+			reset-names = "axi", "osc", "apb";
+		};
+
 		crypto: crypto@16000000 {
 			compatible = "starfive,jh7110-crypto";
 			reg = <0x0 0x16000000 0x0 0x4000>;
-- 
2.50.0

[PATCH v3 3/3] riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader

[E Shattow]

Add bootph-pre-ram hinting to jh7110.dtsi:
  - CPU interrupt controller(s)
  - gmac1_rgmii_rxin fixed-clock (dependency of syscrg)
  - gmac1_rmii_refin fixed-clock (dependency of syscrg)
  - oscillator
  - core local interrupt timer
  - syscrg clock-controller
  - pllclk clock-controller (dependency of syscrg)
  - DDR memory controller

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index f3876660c07f..6e56e9d20bb0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -35,6 +35,7 @@ S7_0: cpu@0 {
 
 			cpu0_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -68,6 +69,7 @@ U74_1: cpu@1 {
 
 			cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -101,6 +103,7 @@ U74_2: cpu@2 {
 
 			cpu2_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -134,6 +137,7 @@ U74_3: cpu@3 {
 
 			cpu3_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -167,6 +171,7 @@ U74_4: cpu@4 {
 
 			cpu4_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -273,12 +278,14 @@ gmac0_rmii_refin: gmac0-rmii-refin-clock {
 
 	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "gmac1_rgmii_rxin";
 		#clock-cells = <0>;
 	};
 
 	gmac1_rmii_refin: gmac1-rmii-refin-clock {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "gmac1_rmii_refin";
 		#clock-cells = <0>;
 	};
@@ -321,6 +328,7 @@ mclk_ext: mclk-ext-clock {
 
 	osc: oscillator {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "osc";
 		#clock-cells = <0>;
 	};
@@ -354,6 +362,7 @@ soc {
 		clint: timer@2000000 {
 			compatible = "starfive,jh7110-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0x10000>;
+			bootph-pre-ram;
 			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
 					      <&cpu1_intc 3>, <&cpu1_intc 7>,
 					      <&cpu2_intc 3>, <&cpu2_intc 7>,
@@ -880,6 +889,7 @@ qspi: spi@13010000 {
 		syscrg: clock-controller@13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;
+			bootph-pre-ram;
 			clocks = <&osc>, <&gmac1_rmii_refin>,
 				 <&gmac1_rgmii_rxin>,
 				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
@@ -904,6 +914,7 @@ sys_syscon: syscon@13030000 {
 
 			pllclk: clock-controller {
 				compatible = "starfive,jh7110-pll";
+				bootph-pre-ram;
 				clocks = <&osc>;
 				#clock-cells = <1>;
 			};
@@ -935,6 +946,7 @@ memory-controller@15700000 {
 			compatible = "starfive,jh7110-dmc";
 			reg = <0x0 0x15700000 0x0 0x10000>,
 			      <0x0 0x13000000 0x0 0x10000>;
+			bootph-pre-ram;
 			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
 			clock-names = "pll";
 			resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
-- 
2.50.0

Re: [PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[Krzysztof Kozlowski]

On 23/08/2025 10:58, E Shattow wrote:
> Describe JH7110 SoC DDR external memory interface.
> 
> Signed-off-by: E Shattow <e@freeshell.de>

Don't send the same patch multiple times. To which one people should
respond?

Best regards,
Krzysztof

RE: [PATCH v3 2/3] riscv: dts: starfive: jh7110: add DMC memory controller

[Hal Feng]

> On 23.08.25 18:02, E Shattow wrote:
>
> Add JH7110 SoC DDR external memory controller.
> 
> Signed-off-by: E Shattow <e@freeshell.de>

Reviewed-by: Hal Feng <hal.feng@starfivetech.com>

Best regards,
Hal

> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 0ba74ef04679..f3876660c07f 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -931,6 +931,18 @@ watchdog@13070000 {
>  				 <&syscrg JH7110_SYSRST_WDT_CORE>;
>  		};
> 
> +		memory-controller@15700000 {
> +			compatible = "starfive,jh7110-dmc";
> +			reg = <0x0 0x15700000 0x0 0x10000>,
> +			      <0x0 0x13000000 0x0 0x10000>;
> +			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
> +			clock-names = "pll";
> +			resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
> +				 <&syscrg JH7110_SYSRST_DDR_OSC>,
> +				 <&syscrg JH7110_SYSRST_DDR_APB>;
> +			reset-names = "axi", "osc", "apb";
> +		};
> +
>  		crypto: crypto@16000000 {
>  			compatible = "starfive,jh7110-crypto";
>  			reg = <0x0 0x16000000 0x0 0x4000>;
> --
> 2.50.0

RE: [PATCH v3 3/3] riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader

[Hal Feng]

> On 23.08.25 18:02, E Shattow wrote:
> Add bootph-pre-ram hinting to jh7110.dtsi:
>   - CPU interrupt controller(s)
>   - gmac1_rgmii_rxin fixed-clock (dependency of syscrg)
>   - gmac1_rmii_refin fixed-clock (dependency of syscrg)
>   - oscillator
>   - core local interrupt timer
>   - syscrg clock-controller
>   - pllclk clock-controller (dependency of syscrg)
>   - DDR memory controller
> 
> Signed-off-by: E Shattow <e@freeshell.de>

Reviewed-by: Hal Feng <hal.feng@starfivetech.com>

Best regards,
Hal

> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index f3876660c07f..6e56e9d20bb0 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -35,6 +35,7 @@ S7_0: cpu@0 {
> 
>  			cpu0_intc: interrupt-controller {
>  				compatible = "riscv,cpu-intc";
> +				bootph-pre-ram;
>  				interrupt-controller;
>  				#interrupt-cells = <1>;
>  			};
> @@ -68,6 +69,7 @@ U74_1: cpu@1 {
> 
>  			cpu1_intc: interrupt-controller {
>  				compatible = "riscv,cpu-intc";
> +				bootph-pre-ram;
>  				interrupt-controller;
>  				#interrupt-cells = <1>;
>  			};
> @@ -101,6 +103,7 @@ U74_2: cpu@2 {
> 
>  			cpu2_intc: interrupt-controller {
>  				compatible = "riscv,cpu-intc";
> +				bootph-pre-ram;
>  				interrupt-controller;
>  				#interrupt-cells = <1>;
>  			};
> @@ -134,6 +137,7 @@ U74_3: cpu@3 {
> 
>  			cpu3_intc: interrupt-controller {
>  				compatible = "riscv,cpu-intc";
> +				bootph-pre-ram;
>  				interrupt-controller;
>  				#interrupt-cells = <1>;
>  			};
> @@ -167,6 +171,7 @@ U74_4: cpu@4 {
> 
>  			cpu4_intc: interrupt-controller {
>  				compatible = "riscv,cpu-intc";
> +				bootph-pre-ram;
>  				interrupt-controller;
>  				#interrupt-cells = <1>;
>  			};
> @@ -273,12 +278,14 @@ gmac0_rmii_refin: gmac0-rmii-refin-clock {
> 
>  	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
>  		compatible = "fixed-clock";
> +		bootph-pre-ram;
>  		clock-output-names = "gmac1_rgmii_rxin";
>  		#clock-cells = <0>;
>  	};
> 
>  	gmac1_rmii_refin: gmac1-rmii-refin-clock {
>  		compatible = "fixed-clock";
> +		bootph-pre-ram;
>  		clock-output-names = "gmac1_rmii_refin";
>  		#clock-cells = <0>;
>  	};
> @@ -321,6 +328,7 @@ mclk_ext: mclk-ext-clock {
> 
>  	osc: oscillator {
>  		compatible = "fixed-clock";
> +		bootph-pre-ram;
>  		clock-output-names = "osc";
>  		#clock-cells = <0>;
>  	};
> @@ -354,6 +362,7 @@ soc {
>  		clint: timer@2000000 {
>  			compatible = "starfive,jh7110-clint", "sifive,clint0";
>  			reg = <0x0 0x2000000 0x0 0x10000>;
> +			bootph-pre-ram;
>  			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc
> 7>,
>  					      <&cpu1_intc 3>, <&cpu1_intc 7>,
>  					      <&cpu2_intc 3>, <&cpu2_intc 7>,
> @@ -880,6 +889,7 @@ qspi: spi@13010000 {
>  		syscrg: clock-controller@13020000 {
>  			compatible = "starfive,jh7110-syscrg";
>  			reg = <0x0 0x13020000 0x0 0x10000>;
> +			bootph-pre-ram;
>  			clocks = <&osc>, <&gmac1_rmii_refin>,
>  				 <&gmac1_rgmii_rxin>,
>  				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, @@ -
> 904,6 +914,7 @@ sys_syscon: syscon@13030000 {
> 
>  			pllclk: clock-controller {
>  				compatible = "starfive,jh7110-pll";
> +				bootph-pre-ram;
>  				clocks = <&osc>;
>  				#clock-cells = <1>;
>  			};
> @@ -935,6 +946,7 @@ memory-controller@15700000 {
>  			compatible = "starfive,jh7110-dmc";
>  			reg = <0x0 0x15700000 0x0 0x10000>,
>  			      <0x0 0x13000000 0x0 0x10000>;
> +			bootph-pre-ram;
>  			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
>  			clock-names = "pll";
>  			resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
> --
> 2.50.0

Re: [PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[E Shattow]

On 8/23/25 08:20, Krzysztof Kozlowski wrote:
> On 23/08/2025 10:58, E Shattow wrote:
>> Describe JH7110 SoC DDR external memory interface.
>>
>> Signed-off-by: E Shattow <e@freeshell.de>
>
> Don't send the same patch multiple times. To which one people should
> respond?
>
> Best regards,
> Krzysztof

Respond to v3 RESEND (this thread), or I may collect responses from
either thread they are the same content. I'd missed a linux-riscv list
CC line on a patch and that confused patchwork, and then I missed
'RESEND' in subject for the re-send series after the cover letter.
Patchwork sees the RESEND series now, and sorry for the added noise. -E

Re: [PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[Krzysztof Kozlowski]

On Sat, Aug 23, 2025 at 03:01:41AM -0700, E Shattow wrote:
> Describe JH7110 SoC DDR external memory interface.
> 
> Signed-off-by: E Shattow <e@freeshell.de>
> ---
>  .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

There is no memory controllers driver change, so I am fine if this goes
via SoC/DTS tree.  If you want me to pick it up, please ping on IRC.

Best regards,
Krzysztof

Re: [PATCH v3 1/3] dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 754 bytes --]

On Sun, Aug 24, 2025 at 11:25:08AM +0200, Krzysztof Kozlowski wrote:
> On Sat, Aug 23, 2025 at 03:01:41AM -0700, E Shattow wrote:
> > Describe JH7110 SoC DDR external memory interface.
> > 
> > Signed-off-by: E Shattow <e@freeshell.de>
> > ---
> >  .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
> >  1 file changed, 74 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> There is no memory controllers driver change, so I am fine if this goes
> via SoC/DTS tree.  If you want me to pick it up, please ping on IRC.

That's cool, I will take it with the dts changes. Thanks.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 RESEND 0/3] riscv: dts: starfive: jh7110: More U-Boot downstream changes for JH7110

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

On Sat, Aug 23, 2025 at 03:01:40AM -0700, E Shattow wrote:
> Bring in additional downstream U-Boot boot loader changes for StarFive
> VisionFive2 board target (and related JH7110 common boards). Create a
> basic dt-binding (and not any Linux driver) in support of the
> memory-controller dts node used in mainline U-Boot. Also add
> bootph-pre-ram hinting to jh7110.dtsi needed at SPL boot phase.

Emil, could you take a look at this please?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 RESEND 0/3] riscv: dts: starfive: jh7110: More U-Boot downstream changes for JH7110

[Emil Renner Berthing]

E Shattow wrote:
> Bring in additional downstream U-Boot boot loader changes for StarFive
> VisionFive2 board target (and related JH7110 common boards). Create a
> basic dt-binding (and not any Linux driver) in support of the
> memory-controller dts node used in mainline U-Boot. Also add
> bootph-pre-ram hinting to jh7110.dtsi needed at SPL boot phase.
>
> Changes since v2:
>
> - patch 1/3 "add StarFive JH7110 SoC DMC": wrap at 80 col, clock-names
>   const is 'pll'.
>
> - patch 2/3 "add memory controller node": memory-controller node follows
>   sorting style by reg address, between watchdog and crypto nodes. Update
>   clock-names to 'pll'.
>
> - patch 3/3 "bootph-pre-ram hinting needed by boot loader": add missing
>   hints for syscrg dependencies 'gmac1_rgmii_rxin', 'gmac1_rmii_refin',
>   and 'pllclk'.
>
> E Shattow (3):
>   dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC
>   riscv: dts: starfive: jh7110: add DMC memory controller
>   riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot
>     loader
>
>  .../starfive,jh7110-dmc.yaml                  | 74 +++++++++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 24 ++++++
>  2 files changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml

Thank you!

For the whole series:

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>