[PATCH v5 3/4] iio: adc: extract setup function without backend

[Ioana Risteiu <Ioana.Risteiu@analog.com>]

Refactor probe function by moving the initialization specific to
communication without iio-backend into a separate setup function.

The purpose of this modification is better code organization. No
functional changes intended.

Signed-off-by: Ioana Risteiu <Ioana.Risteiu@analog.com>
---
changes in v5:
 - fix indentation
 - remove blank line
 drivers/iio/adc/ad7779.c | 84 +++++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 39 deletions(-)

diff --git a/drivers/iio/adc/ad7779.c b/drivers/iio/adc/ad7779.c
index 845adc510239..b4e56983201c 100644
--- a/drivers/iio/adc/ad7779.c
+++ b/drivers/iio/adc/ad7779.c
@@ -752,6 +752,50 @@ static int ad7779_conf(struct ad7779_state *st, struct gpio_desc *start_gpio)
 	return 0;
 }
 
+static int ad7779_setup_without_backend(struct ad7779_state *st, struct iio_dev *indio_dev)
+{
+	int ret;
+	struct device *dev = &st->spi->dev;
+
+	indio_dev->info = &ad7779_info;
+	indio_dev->channels = st->chip_info->channels;
+
+	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
+					  iio_device_id(indio_dev));
+	if (!st->trig)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7779_trigger_ops;
+
+	iio_trigger_set_drvdata(st->trig, st);
+
+	ret = devm_request_irq(dev, st->spi->irq, iio_trigger_generic_data_rdy_poll,
+			       IRQF_ONESHOT | IRQF_NO_AUTOEN, indio_dev->name,
+			       st->trig);
+	if (ret)
+		return dev_err_probe(dev, ret, "request IRQ %d failed\n",
+				     st->spi->irq);
+
+	ret = devm_iio_trigger_register(dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	init_completion(&st->completion);
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &ad7779_trigger_handler,
+					      &ad7779_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	return ad7779_spi_write_mask(st, AD7779_REG_DOUT_FORMAT,
+				     AD7779_DCLK_CLK_DIV_MSK,
+				     FIELD_PREP(AD7779_DCLK_CLK_DIV_MSK, 7));
+}
+
 static int ad7779_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -760,9 +804,6 @@ static int ad7779_probe(struct spi_device *spi)
 	struct device *dev = &spi->dev;
 	int ret = -EINVAL;
 
-	if (!spi->irq)
-		return dev_err_probe(dev, ret, "DRDY irq not present\n");
-
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -804,45 +845,10 @@ static int ad7779_probe(struct spi_device *spi)
 		return ret;
 
 	indio_dev->name = st->chip_info->name;
-	indio_dev->info = &ad7779_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = st->chip_info->channels;
 	indio_dev->num_channels = ARRAY_SIZE(ad7779_channels);
 
-	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
-					  iio_device_id(indio_dev));
-	if (!st->trig)
-		return -ENOMEM;
-
-	st->trig->ops = &ad7779_trigger_ops;
-
-	iio_trigger_set_drvdata(st->trig, st);
-
-	ret = devm_request_irq(dev, spi->irq, iio_trigger_generic_data_rdy_poll,
-			       IRQF_ONESHOT | IRQF_NO_AUTOEN, indio_dev->name,
-			       st->trig);
-	if (ret)
-		return dev_err_probe(dev, ret, "request IRQ %d failed\n",
-				     st->spi->irq);
-
-	ret = devm_iio_trigger_register(dev, st->trig);
-	if (ret)
-		return ret;
-
-	indio_dev->trig = iio_trigger_get(st->trig);
-
-	init_completion(&st->completion);
-
-	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
-					      &iio_pollfunc_store_time,
-					      &ad7779_trigger_handler,
-					      &ad7779_buffer_setup_ops);
-	if (ret)
-		return ret;
-
-	ret = ad7779_spi_write_mask(st, AD7779_REG_DOUT_FORMAT,
-				    AD7779_DCLK_CLK_DIV_MSK,
-				    FIELD_PREP(AD7779_DCLK_CLK_DIV_MSK, 7));
+	ret = ad7779_setup_without_backend(st, indio_dev);
 	if (ret)
 		return ret;
 
-- 
2.47.2