Re: [PATCH v2 3/4] iio: adc: ad7768-1: use devm_regulator_get_enable_read_voltage()

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 24 Aug 2025 01:10:03 -0300
Jonathan Santos <Jonathan.Santos@analog.com> wrote:

> Use devm_regulator_get_enable_read_voltage() function as a standard and
> concise way of reading the voltage from the regulator and keep the
> regulator enabled. Replace the regulator descriptor with the direct
> voltage value in the device struct.
> 
> Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>

This makes sense even without the rest of the series, so to reduce
what you have to deal with in v3, applied to the togreg branch of iio.git

thanks,

Jonathan

> ---
> v2 Changes:
> * Removed regulator value check (already done in probe).
> * Fixed commit message and description as requested.
> ---
>  drivers/iio/adc/ad7768-1.c | 35 ++++++++---------------------------
>  1 file changed, 8 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
> index 83b0907b068d..51562367a9d4 100644
> --- a/drivers/iio/adc/ad7768-1.c
> +++ b/drivers/iio/adc/ad7768-1.c
> @@ -224,7 +224,7 @@ struct ad7768_state {
>  	struct spi_device *spi;
>  	struct regmap *regmap;
>  	struct regmap *regmap24;
> -	struct regulator *vref;
> +	int vref_uv;
>  	struct regulator_dev *vcm_rdev;
>  	unsigned int vcm_output_sel;
>  	struct clk *mclk;
> @@ -787,7 +787,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
>  {
>  	struct ad7768_state *st = iio_priv(indio_dev);
>  	const struct iio_scan_type *scan_type;
> -	int scale_uv, ret, temp;
> +	int ret, temp;
>  
>  	scan_type = iio_get_current_scan_type(indio_dev, chan);
>  	if (IS_ERR(scan_type))
> @@ -808,11 +808,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
>  		return IIO_VAL_INT;
>  
>  	case IIO_CHAN_INFO_SCALE:
> -		scale_uv = regulator_get_voltage(st->vref);
> -		if (scale_uv < 0)
> -			return scale_uv;
> -
> -		*val = (scale_uv * 2) / 1000;
> +		*val = (st->vref_uv * 2) / 1000;
>  		*val2 = scan_type->realbits;
>  
>  		return IIO_VAL_FRACTIONAL_LOG2;
> @@ -1145,13 +1141,6 @@ static const struct iio_trigger_ops ad7768_trigger_ops = {
>  	.validate_device = iio_trigger_validate_own_device,
>  };
>  
> -static void ad7768_regulator_disable(void *data)
> -{
> -	struct ad7768_state *st = data;
> -
> -	regulator_disable(st->vref);
> -}
> -
>  static int ad7768_set_channel_label(struct iio_dev *indio_dev,
>  						int num_channels)
>  {
> @@ -1395,19 +1384,11 @@ static int ad7768_probe(struct spi_device *spi)
>  		return dev_err_probe(&spi->dev, PTR_ERR(st->regmap24),
>  				     "Failed to initialize regmap24");
>  
> -	st->vref = devm_regulator_get(&spi->dev, "vref");
> -	if (IS_ERR(st->vref))
> -		return PTR_ERR(st->vref);
> -
> -	ret = regulator_enable(st->vref);
> -	if (ret) {
> -		dev_err(&spi->dev, "Failed to enable specified vref supply\n");
> -		return ret;
> -	}
> -
> -	ret = devm_add_action_or_reset(&spi->dev, ad7768_regulator_disable, st);
> -	if (ret)
> -		return ret;
> +	ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref");
> +	if (ret < 0)
> +		return dev_err_probe(&spi->dev, ret,
> +				     "Failed to get VREF voltage\n");
> +	st->vref_uv = ret;
>  
>  	st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
>  	if (IS_ERR(st->mclk))