[PATCH v4 3/4] media: imx8mq-mipi-csi2: Explicitly release reset

[Guoniu Zhou <guoniu.zhou@nxp.com>]

Call reset_control_deassert() to explicitly release reset to make sure
reset bits are cleared since platform like i.MX8ULP can't clear reset
bits automatically.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
---
 drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
index 2bf11984690af2e687a3217e465697333d9d995d..6b83aa85af42e1dac25cf29056863680c1f89402 100644
--- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
+++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
@@ -337,18 +337,14 @@ static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
 {
 	int ret;
 
-	/*
-	 * these are most likely self-clearing reset bits. to make it
-	 * more clear, the reset-imx7 driver should implement the
-	 * .reset() operation.
-	 */
 	ret = reset_control_assert(state->rst);
 	if (ret < 0) {
 		dev_err(state->dev, "Failed to assert resets: %d\n", ret);
 		return ret;
 	}
 
-	return 0;
+	/* Explicitly release reset to make sure reset bits are cleared. */
+	return reset_control_deassert(state->rst);
 }
 
 static void imx8mq_mipi_csi_set_params(struct csi_state *state)

-- 
2.34.1