Re: [PATCH v2 1/3] dt-binding: display: Add ITE IT61620 MIPI DSI to HDMI bridge

[Rob Herring <robh@kernel.org>]

On Thu, Aug 28, 2025 at 12:01:18PM +0800, Pet Weng wrote:
> This chip receives MIPI DSI input and outputs HDMI, and is commonly
> connected to SoCs via I2C and DSI.
> 
> Signed-off-by: Pet Weng <pet.weng@ite.com.tw>
> ---
>  .../bindings/display/bridge/ite,it61620.yaml       | 143 +++++++++++++++++++++
>  1 file changed, 143 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it61620.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it61620.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..dd8a54a1e0aa9bbbd9d02e68398bb5df65b821a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it61620.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it61620.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE IT61620 MIPI DSI to HDMI Bridge
> +
> +maintainers:
> +  - Pet Weng <pet.weng@ite.com.tw>
> +
> +description: |
> +  The ITE IT61620 is a high-performance, low-power HDMI bridge that converts
> +  MIPI DSI input to HDMI 1.4b TMDS output. It supports up to 4 lanes of MIPI
> +  D-PHY 2.0 input at 2.5Gbps per lane (10Gbps total), compatible with DSI-2 v2.0.

Wrap lines at 80 char.

> +
> +  The HDMI transmitter side supports up to 4Kx2K@30Hz resolutions, and is
> +  compliant with HDMI 1.4b and HDCP 1.4.
> +
> +  For audio, the IT61620 supports up to 8-channel LPCM via I2S (multi-line or
> +  TDM mode), with optional S/PDIF or DSD (for SACD). It supports audio
> +  sampling rates up to 192kHz.
> +
> +allOf:
> +  - $ref: /schemas/sound/dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: ite,it61620
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description: interrupt specifier of INT pin
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: GPIO specifier of RESET pin
> +
> +  ivdd-supply:
> +    description: core voltage
> +
> +  ovdd-supply:
> +    description: I/O voltage
> +
> +  ovdd1833-supply:
> +    description: flexible I/O votage
> +
> +  pinctrl-names:
> +    items:
> +      - const: default
> +
> +  pinctrl-0:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: Input port for MIPI DSI
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes: true
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output port for HDMI output
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - reset-gpios
> +  - ivdd-supply
> +  - ovdd-supply
> +  - ovdd1833-supply
> +  - ports
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ite61620@58 {

bridge@58

> +                compatible = "ite,it61620";
> +                reg = <0x58>;
> +                #sound-dai-cells = <0>;
> +                interrupt-parent = <&pio>;
> +                interrupts = <128 IRQ_TYPE_LEVEL_LOW>;
> +                pinctrl-names = "default";
> +                pinctrl-0 = <&it61620_pins>;
> +                reset-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
> +                ivdd-supply = <&pp1000_hdmi_x>;
> +                ovdd-supply = <&pp3300_vio28_x>;
> +                ovdd1833-supply = <&pp1800_vcamio_x>;
> +
> +                ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        port@0 {
> +                                reg = <0>;
> +                                it61620_dsi_in: endpoint {
> +                                        data-lanes = <0 1 2 3>;
> +                                        remote-endpoint = <&dsi_out>;
> +                                };
> +                        };
> +
> +                        port@1 {
> +                                reg = <1>;
> +                                it61620_hdmi_out: endpoint {
> +                                        remote-endpoint = <&hdmi_connector_in>;
> +                                };
> +                        };
> +                };
> +        };
> +    };
> 
> -- 
> 2.34.1
>