[PATCH v6 0/3] Add Equalization Settings for 8.0 GT/s and 32.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s

[PATCH v6 0/3] Add Equalization Settings for 8.0 GT/s and 32.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s

[Ziyue Zhang]

This series adds add equalization settings for 8.0 GT/s and 32.0 GT/s,
and add PCIe lane equalization preset properties for 8.0 GT/s and
16.0 GT/s for sa8775p ride platform, which fix AER errors.

While equalization settings for 16 GT/s have already been set, this
update adds the required equalization settings for PCIe operating at
8.0 GT/s and 32.0 GT/s, including the configuration of shadow registers,
ensuring optimal performance and stability.

The DT change for sa8775p add PCIe lane equalization preset properties
for 8 GT/s and 16 GT/s data rates used in lane equalization procedure.

Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>

Changes in v6:
- Add Fix tag and format as Xmax order (Mani)
- Delte the blank line (Neil)
- Link to v5: https://lore.kernel.org/all/20250819071649.1531437-1-ziyue.zhang@oss.qualcomm.com/

Changes in v5:
- Add support for 32.0 GT/s
- Add warning print for speed higher than 32.0 GT/s (Mani)
- Link to v4: https://lore.kernel.org/all/20250714082110.3890821-1-ziyue.zhang@oss.qualcomm.com/

Changes in v4:
- Bail out early if the link speed > 16 GT/s and use pci->max_link_speed directly (Mani)
- Fix the build warning. (Bjorn)
- Link to v3: https://lore.kernel.org/all/8ccd3731-8dbc-4972-a79a-ba78e90ec4a8@quicinc.com/

Changes in v3:
- Delte TODO tag and warn print in pcie-qcom-common.c. (Bjorn)
- Refined the commit message for better readability. (Bjorn)
- Link to v2: https://lore.kernel.org/all/20250611100319.464803-1-quic_ziyuzhan@quicinc.com/

Changes in v2:
- Update code in pcie-qcom-common.c make it easier to read. (Neil)
- Fix the compile error.
- Link to v1: https://lore.kernel.org/all/20250604091946.1890602-1-quic_ziyuzhan@quicinc.com


Ziyue Zhang (3):
  PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s
  PCI: qcom: fix macro typo for CURSOR
  arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties

 arch/arm64/boot/dts/qcom/lemans.dtsi          |  6 ++
 drivers/pci/controller/dwc/pcie-designware.h  |  5 +-
 drivers/pci/controller/dwc/pcie-qcom-common.c | 58 +++++++++++--------
 drivers/pci/controller/dwc/pcie-qcom-common.h |  2 +-
 drivers/pci/controller/dwc/pcie-qcom-ep.c     |  6 +-
 drivers/pci/controller/dwc/pcie-qcom.c        |  6 +-
 6 files changed, 49 insertions(+), 34 deletions(-)


base-commit: 3ac864c2d9bb8608ee236e89bf561811613abfce
-- 
2.43.0

[PATCH v6 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s

[Ziyue Zhang]

Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
stability and avoid AER Correctable Errors reported on some platforms
(eg. SA8775P).

8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
This setting is programmed into a group of shadow registers, which can be
switched to configure equalization for different speeds by writing 00b,
01b and 10b to `RATE_SHADOW_SEL`.

Hence program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
and 32.0 GT/s.

Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")

Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware.h  |  1 -
 drivers/pci/controller/dwc/pcie-qcom-common.c | 58 +++++++++++--------
 drivers/pci/controller/dwc/pcie-qcom-common.h |  2 +-
 drivers/pci/controller/dwc/pcie-qcom-ep.c     |  6 +-
 drivers/pci/controller/dwc/pcie-qcom.c        |  6 +-
 5 files changed, 41 insertions(+), 32 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index b5e7e18138a6..11de844428e5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -123,7 +123,6 @@
 #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE	BIT(16)
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT	24
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK	GENMASK(25, 24)
-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT	0x1
 
 #define GEN3_EQ_CONTROL_OFF			0x8A8
 #define GEN3_EQ_CONTROL_OFF_FB_MODE		GENMASK(3, 0)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
index 3aad19b56da8..969c34f738a9 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-common.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
@@ -8,9 +8,11 @@
 #include "pcie-designware.h"
 #include "pcie-qcom-common.h"
 
-void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
+void qcom_pcie_common_set_equalization(struct dw_pcie *pci)
 {
+	struct device *dev = pci->dev;
 	u32 reg;
+	u16 speed;
 
 	/*
 	 * GEN3_RELATED_OFF register is repurposed to apply equalization
@@ -19,32 +21,40 @@ void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
 	 * determines the data rate for which these equalization settings are
 	 * applied.
 	 */
-	reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
-	reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
-	reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
-	reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
-			  GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT);
-	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
 
-	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
-	reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
-		GEN3_EQ_FMDC_N_EVALS |
-		GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
-		GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
-	reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
-		FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
-		FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
-		FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
-	dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
+	for (speed = PCIE_SPEED_8_0GT; speed <= pcie_link_speed[pci->max_link_speed]; ++speed) {
+		if (speed > PCIE_SPEED_32_0GT) {
+			dev_warn(dev, "Skipped equalization settings for speeds higher than 32.0 GT/s\n");
+			break;
+		}
 
-	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
-	reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
-		GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
-		GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
-		GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
-	dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
+		reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
+		reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
+		reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
+		reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
+			  speed - PCIE_SPEED_8_0GT);
+		dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
+
+		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
+		reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
+			GEN3_EQ_FMDC_N_EVALS |
+			GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
+			GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
+		reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
+			FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
+		dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
+
+		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
+		reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
+			GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
+			GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
+			GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
+		dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
+	}
 }
-EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_equalization);
+EXPORT_SYMBOL_GPL(qcom_pcie_common_set_equalization);
 
 void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci)
 {
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.h b/drivers/pci/controller/dwc/pcie-qcom-common.h
index 7d88d29e4766..7f5ca2fd9a72 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-common.h
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.h
@@ -8,7 +8,7 @@
 
 struct dw_pcie;
 
-void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci);
+void qcom_pcie_common_set_equalization(struct dw_pcie *pci);
 void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci);
 
 #endif
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 60afb4d0134c..aeb166f68d55 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -511,10 +511,10 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 		goto err_disable_resources;
 	}
 
-	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT) {
-		qcom_pcie_common_set_16gt_equalization(pci);
+	qcom_pcie_common_set_equalization(pci);
+
+	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT)
 		qcom_pcie_common_set_16gt_lane_margining(pci);
-	}
 
 	/*
 	 * The physical address of the MMIO region which is exposed as the BAR
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 294babe1816e..31841ab9498b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -322,10 +322,10 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
 {
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 
-	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT) {
-		qcom_pcie_common_set_16gt_equalization(pci);
+	qcom_pcie_common_set_equalization(pci);
+
+	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT)
 		qcom_pcie_common_set_16gt_lane_margining(pci);
-	}
 
 	/* Enable Link Training state machine */
 	if (pcie->cfg->ops->ltssm_enable)
-- 
2.43.0

Re: [PATCH v6 1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s

[Bjorn Helgaas]

On Thu, Sep 04, 2025 at 02:52:23PM +0800, Ziyue Zhang wrote:
> Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
> stability and avoid AER Correctable Errors reported on some platforms
> (eg. SA8775P).
>
> 8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
> This setting is programmed into a group of shadow registers, which can be
> switched to configure equalization for different speeds by writing 00b,
> 01b and 10b to `RATE_SHADOW_SEL`.
> 
> Hence program equalization registers in a loop using link speed as index,
> so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
> and 32.0 GT/s.
> 
> Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
> 

Drop this blank line.

> Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
> Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>

> +++ b/drivers/pci/controller/dwc/pcie-qcom-common.c

> +	for (speed = PCIE_SPEED_8_0GT; speed <= pcie_link_speed[pci->max_link_speed]; ++speed) {

Use "speed++" when there's no need for preincrement to follow typical
drivers/pci/ usage.

No need to repost for these.

[PATCH v6 2/3] PCI: qcom: fix macro typo for CURSOR

[Ziyue Zhang]

Corrected a typo in the macro name GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA and
GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA to ensure consistency and avoid
potential issues.

Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware.h  | 4 ++--
 drivers/pci/controller/dwc/pcie-qcom-common.c | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 11de844428e5..266f91045577 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -133,8 +133,8 @@
 #define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF		0x8AC
 #define GEN3_EQ_FMDC_T_MIN_PHASE23		GENMASK(4, 0)
 #define GEN3_EQ_FMDC_N_EVALS			GENMASK(9, 5)
-#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA	GENMASK(13, 10)
-#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA	GENMASK(17, 14)
+#define GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA	GENMASK(13, 10)
+#define GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA	GENMASK(17, 14)
 
 #define PCIE_PORT_MULTI_LANE_CTRL	0x8C0
 #define PORT_MLTI_UPCFG_SUPPORT		BIT(7)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
index 969c34f738a9..7c1e268c8749 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-common.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
@@ -38,12 +38,12 @@ void qcom_pcie_common_set_equalization(struct dw_pcie *pci)
 		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
 		reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
 			GEN3_EQ_FMDC_N_EVALS |
-			GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
-			GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
+			GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA |
+			GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA);
 		reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
 			FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
-			FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
-			FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA, 0x5) |
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA, 0x5);
 		dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
 
 		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
-- 
2.43.0

Re: [PATCH v6 2/3] PCI: qcom: fix macro typo for CURSOR

[Bjorn Helgaas]

On Thu, Sep 04, 2025 at 02:52:24PM +0800, Ziyue Zhang wrote:
> Corrected a typo in the macro name GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA and
> GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA to ensure consistency and avoid
> potential issues.

In subject, s/fix macro/Fix macro/ to follow precedent.

s/Corrected/Correct/ for imperative mood.

I'd stop after GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA.  Pointless to go on
and talk about consistency and issues.  It's a simple typo fix.

No need to repost for this.

> -#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA	GENMASK(13, 10)
> -#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA	GENMASK(17, 14)
> +#define GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA	GENMASK(13, 10)
> +#define GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA	GENMASK(17, 14)

[PATCH v6 3/3] arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties

[Ziyue Zhang]

Add PCIe lane equalization preset properties with all values set to 5 for
8.0 GT/s and 16.0 GT/s data rates to enhance link stability.

Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 64f5378c6a47..c88bf206ea82 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -7657,6 +7657,9 @@ pcie0: pcie@1c00000 {
 		phys = <&pcie0_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55>;
+
 		status = "disabled";
 
 		pcieport0: pcie@0 {
@@ -7827,6 +7830,9 @@ pcie1: pcie@1c10000 {
 		phys = <&pcie1_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
 		status = "disabled";
 
 		pcie@0 {
-- 
2.43.0

Re: (subset) [PATCH v6 0/3] Add Equalization Settings for 8.0 GT/s and 32.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s

[Manivannan Sadhasivam]

On Thu, 04 Sep 2025 14:52:22 +0800, Ziyue Zhang wrote:
> This series adds add equalization settings for 8.0 GT/s and 32.0 GT/s,
> and add PCIe lane equalization preset properties for 8.0 GT/s and
> 16.0 GT/s for sa8775p ride platform, which fix AER errors.
> 
> While equalization settings for 16 GT/s have already been set, this
> update adds the required equalization settings for PCIe operating at
> 8.0 GT/s and 32.0 GT/s, including the configuration of shadow registers,
> ensuring optimal performance and stability.
> 
> [...]

Applied, thanks!

[1/3] PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s
      commit: 37bf0f4e39de9b53bc6f8d3702b021e2c6b5bae3
[2/3] PCI: qcom: fix macro typo for CURSOR
      commit: ea5fbbc15906abdef174c88cecfec4b2a0c748b9

Best regards,
-- 
Manivannan Sadhasivam <mani@kernel.org>

Re: (subset) [PATCH v6 0/3] Add Equalization Settings for 8.0 GT/s and 32.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s

[Bjorn Andersson]

On Thu, 04 Sep 2025 14:52:22 +0800, Ziyue Zhang wrote:
> This series adds add equalization settings for 8.0 GT/s and 32.0 GT/s,
> and add PCIe lane equalization preset properties for 8.0 GT/s and
> 16.0 GT/s for sa8775p ride platform, which fix AER errors.
> 
> While equalization settings for 16 GT/s have already been set, this
> update adds the required equalization settings for PCIe operating at
> 8.0 GT/s and 32.0 GT/s, including the configuration of shadow registers,
> ensuring optimal performance and stability.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: qcom: lemans: Add PCIe lane equalization preset properties
      commit: b4f745f1d8adad62ba8c2065873c8a857ed4c3da

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>