[RESEND PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document after shutdown fan settings

[Marek Vasut <marek.vasut+renesas@mailbox.org>]

Document fan-shutdown-percent property, used to describe fan RPM in percent
set during shutdown. This is used to keep the fan running at fixed RPM after
the kernel shut down, which is useful on hardware that does keep heating
itself even after the kernel did shut down, for example from some sort of
management core.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
---
 Documentation/devicetree/bindings/hwmon/pwm-fan.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
index 8b4ed5ee962fb..a84cc3a4cfdca 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -31,6 +31,15 @@ properties:
       it must be self resetting edge interrupts.
     maxItems: 1
 
+  fan-shutdown-percent:
+    description:
+      Fan RPM in percent set during shutdown. This is used to keep the fan
+      running at fixed RPM after the kernel shut down, which is useful on
+      hardware that does keep heating itself even after the kernel did shut
+      down, for example from some sort of management core.
+    minimum: 0
+    maximum: 100
+
   fan-stop-to-start-percent:
     description:
       Minimum fan RPM in percent to start when stopped.
-- 
2.50.1