devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Francesco Dolcini <francesco@dolcini.it>
To: Beleswar Padhi <b-padhi@ti.com>
Cc: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, afd@ti.com,
	u-kumar1@ti.com, hnagalla@ti.com, jm@ti.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Josua Mayer <josua@solid-run.com>,
	Logan Bristol <logan.bristol@utexas.edu>,
	Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Subject: Re: [PATCH v3 17/33] arm64: dts: ti: k3-am642-sr-som: Add missing cfg for TI IPC Firmware
Date: Fri, 5 Sep 2025 08:34:49 +0200	[thread overview]
Message-ID: <20250905063449.GA6194@francesco-nb> (raw)
In-Reply-To: <20250905051846.1189612-18-b-padhi@ti.com>

On Fri, Sep 05, 2025 at 10:48:30AM +0530, Beleswar Padhi wrote:
> Currently, only R5F remote processors are enabled for k3-am642-sr SoMs,
> whereas the M4F in MCU domain is disabled. Enable the M4F remote
> processor at board level by reserving memory carveouts and assigning
> mailboxes.
> 
> While at it, reserve the MAIN domain timers that are used by R5F remote
> processors for ticks to avoid rproc crashes. This config aligns with
> other AM64 boards and can be refactored out later.
> 
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> ---
> Cc: Josua Mayer <josua@solid-run.com>
> Cc: Logan Bristol <logan.bristol@utexas.edu>
> Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
> Requesting for review/test of this patch.
> 
> v3: Changelog:
> 1. None
> 
> Link to v2:
> https://lore.kernel.org/all/20250823160901.2177841-18-b-padhi@ti.com/
> 
> v2: Changelog:
> 1. Re-ordered patch from [PATCH 27/33] to [PATCH v2 17/33].
> 
> Link to v1:
> https://lore.kernel.org/all/20250814223839.3256046-28-b-padhi@ti.com/
> 
>  arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 54 +++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> index 81adae0a8e55..8cb61f831734 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> @@ -162,6 +162,24 @@ main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
>  			reg = <0x00 0xa3100000 0x00 0xf00000>;
>  			no-map;
>  		};
> +
> +		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {

this must be

mcu_m4fss_dma_memory_region: memory@a4000000

the device tree specification requires generic node names, my comment [1]
had nothing specific on verdin am62/am62p.

Francesco

[1] https://lore.kernel.org/all/20250821060629.GB7503@francesco-nb/

  reply	other threads:[~2025-09-05  6:41 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-05  5:18 [PATCH v3 00/33] Refactor TI IPC DT configs into dtsi Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 01/33] arm64: dts: ti: k3-j7200: Enable R5F remote processors at board level Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 02/33] arm64: dts: ti: k3-j721e: Enable " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 03/33] arm64: dts: ti: k3-j721s2: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 04/33] arm64: dts: ti: k3-j784s4-j742s2: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 05/33] arm64: dts: ti: k3-am62p-j722s: " Beleswar Padhi
2025-09-05 19:09   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 06/33] arm64: dts: ti: k3-am62: " Beleswar Padhi
2025-09-05 19:11   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 07/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 08/33] arm64: dts: ti: k3-am64: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 09/33] arm64: dts: ti: k3-am65: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 10/33] arm64: dts: ti: k3-am62: Enable Mailbox nodes at the " Beleswar Padhi
2025-09-05 19:13   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 11/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 12/33] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 13/33] arm64: dts: ti: k3-j721e-beagleboneai64: Add missing cfg for TI IPC FW Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 14/33] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 15/33] arm64: dts: ti: k3-am62-verdin: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 16/33] arm64: dts: ti: k3-am62-pocketbeagle2: " Beleswar Padhi
2025-09-08 11:46   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 17/33] arm64: dts: ti: k3-am642-sr-som: " Beleswar Padhi
2025-09-05  6:34   ` Francesco Dolcini [this message]
2025-09-05  5:18 ` [PATCH v3 18/33] arm64: dts: ti: k3-am64-phycore-som: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 19/33] arm64: dts: ti: k3-am642-tqma64xxl: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 20/33] Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations" Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 21/33] Revert "arm64: dts: ti: k3-j721e-beagleboneai64: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 22/33] arm64: dts: ti: k3-j721e-beagleboneai64: Switch MAIN R5F clusters to Split-mode Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 23/33] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Refactor IPC cfg into new dtsi Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 24/33] arm64: dts: ti: k3-j721e-ti-ipc-firmware: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 25/33] arm64: dts: ti: k3-j721s2-ti-ipc-firmware: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 26/33] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 27/33] arm64: dts: ti: k3-j784s4-ti-ipc-firmware: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 28/33] arm64: dts: ti: k3-j722s-ti-ipc-firmware: " Beleswar Padhi
2025-09-05  5:18 ` [PATCH v3 29/33] arm64: dts: ti: k3-am62p-ti-ipc-firmware: " Beleswar Padhi
2025-09-08  9:45   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 30/33] arm64: dts: ti: k3-am62-ti-ipc-firmware: " Beleswar Padhi
2025-09-08  9:37   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 31/33] arm64: dts: ti: k3-am62a-ti-ipc-firmware: " Beleswar Padhi
2025-09-08  9:46   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 32/33] arm64: dts: ti: k3-am64-ti-ipc-firmware: " Beleswar Padhi
2025-09-08  9:46   ` Dhruva Gole
2025-09-05  5:18 ` [PATCH v3 33/33] arm64: dts: ti: k3-am65-ti-ipc-firmware: " Beleswar Padhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250905063449.GA6194@francesco-nb \
    --to=francesco@dolcini.it \
    --cc=afd@ti.com \
    --cc=b-padhi@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hnagalla@ti.com \
    --cc=jm@ti.com \
    --cc=josua@solid-run.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=logan.bristol@utexas.edu \
    --cc=matthias.schiffer@ew.tq-group.com \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).