From: Devang Tailor <dev.tailor@samsung.com>
To: alexandre.belloni@bootlin.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, alim.akhtar@samsung.com,
linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
henrik@grimler.se, faraz.ata@samsung.com
Cc: Devang Tailor <dev.tailor@samsung.com>
Subject: [PATCH v3 2/3] rtc: s3c: support for exynosautov9 on-chip RTC
Date: Fri, 5 Sep 2025 16:35:53 +0530 [thread overview]
Message-ID: <20250905110554.2212304-3-dev.tailor@samsung.com> (raw)
In-Reply-To: <20250905110554.2212304-1-dev.tailor@samsung.com>
The on-chip RTC of this SoC is almost similar to the previous version of
SoCs except for S3C2410_TICNT tick time counter, which is used in this
driver but not applicable for exynosautov9. So re-use the existing driver
skipping disablement of S3C2410_TICNT in s3c24xx_rtc_disable() callback
via a new boolean member of s3c_rtc_data.
This has been tested with 'hwclock' & 'date' utilities
Suggested-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Devang Tailor <dev.tailor@samsung.com>
---
drivers/rtc/rtc-s3c.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 79b2a16f15ad..8fc5b4582b6d 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -48,6 +48,7 @@ struct s3c_rtc {
struct s3c_rtc_data {
bool needs_src_clk;
+ bool use_s3c2410_ticnt;
void (*irq_handler) (struct s3c_rtc *info, int mask);
void (*enable) (struct s3c_rtc *info);
@@ -369,9 +370,11 @@ static void s3c24xx_rtc_disable(struct s3c_rtc *info)
con &= ~S3C2410_RTCCON_RTCEN;
writew(con, info->base + S3C2410_RTCCON);
- con = readb(info->base + S3C2410_TICNT);
- con &= ~S3C2410_TICNT_ENABLE;
- writeb(con, info->base + S3C2410_TICNT);
+ if (info->data->use_s3c2410_ticnt) {
+ con = readb(info->base + S3C2410_TICNT);
+ con &= ~S3C2410_TICNT_ENABLE;
+ writeb(con, info->base + S3C2410_TICNT);
+ }
}
static void s3c6410_rtc_disable(struct s3c_rtc *info)
@@ -550,18 +553,21 @@ static void s3c6410_rtc_irq(struct s3c_rtc *info, int mask)
}
static const struct s3c_rtc_data s3c2410_rtc_data = {
+ .use_s3c2410_ticnt = true,
.irq_handler = s3c24xx_rtc_irq,
.enable = s3c24xx_rtc_enable,
.disable = s3c24xx_rtc_disable,
};
static const struct s3c_rtc_data s3c2416_rtc_data = {
+ .use_s3c2410_ticnt = true,
.irq_handler = s3c24xx_rtc_irq,
.enable = s3c24xx_rtc_enable,
.disable = s3c24xx_rtc_disable,
};
static const struct s3c_rtc_data s3c2443_rtc_data = {
+ .use_s3c2410_ticnt = true,
.irq_handler = s3c24xx_rtc_irq,
.enable = s3c24xx_rtc_enable,
.disable = s3c24xx_rtc_disable,
@@ -574,6 +580,12 @@ static const struct s3c_rtc_data s3c6410_rtc_data = {
.disable = s3c6410_rtc_disable,
};
+static const struct s3c_rtc_data exynosautov9_rtc_data = {
+ .irq_handler = s3c6410_rtc_irq,
+ .enable = s3c24xx_rtc_enable,
+ .disable = s3c24xx_rtc_disable,
+};
+
static const __maybe_unused struct of_device_id s3c_rtc_dt_match[] = {
{
.compatible = "samsung,s3c2410-rtc",
@@ -590,6 +602,9 @@ static const __maybe_unused struct of_device_id s3c_rtc_dt_match[] = {
}, {
.compatible = "samsung,exynos3250-rtc",
.data = &s3c6410_rtc_data,
+ }, {
+ .compatible = "samsung,exynosautov9-rtc",
+ .data = &exynosautov9_rtc_data,
},
{ /* sentinel */ },
};
--
2.34.1
next prev parent reply other threads:[~2025-09-05 10:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20250905105708epcas5p159281b73f87fae88e824b97889908649@epcas5p1.samsung.com>
2025-09-05 11:05 ` [PATCH v3 0/3] On-chip RTC support for ExynosAutov9 Devang Tailor
[not found] ` <CGME20250905105710epcas5p10516745944f09e262f41a5e5dcfce5f8@epcas5p1.samsung.com>
2025-09-05 11:05 ` [PATCH v3 1/3] dt-bindings: rtc: s3c-rtc: add compatible for exynosautov9 Devang Tailor
[not found] ` <CGME20250905105712epcas5p35b5f24b8570c050b7ee675cb26f8ce43@epcas5p3.samsung.com>
2025-09-05 11:05 ` Devang Tailor [this message]
2025-09-05 14:03 ` [PATCH v3 2/3] rtc: s3c: support for exynosautov9 on-chip RTC Henrik Grimler
[not found] ` <CGME20250905105714epcas5p4bb26e232702a9dff37e87dfd07da3946@epcas5p4.samsung.com>
2025-09-05 11:05 ` [PATCH v3 3/3] arm64: dts: exynosautov9: add RTC DT node Devang Tailor
2025-10-05 21:42 ` [PATCH v3 0/3] On-chip RTC support for ExynosAutov9 Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905110554.2212304-3-dev.tailor@samsung.com \
--to=dev.tailor@samsung.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=faraz.ata@samsung.com \
--cc=henrik@grimler.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).