From: Sven Peter <sven@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Felipe Balbi <balbi@kernel.org>, Janne Grunau <j@jannau.net>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Neal Gompa <neal@gompa.dev>, Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Frank Li <Frank.Li@nxp.com>, Ran Wang <ran.wang_1@nxp.com>,
Peter Chen <peter.chen@nxp.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, asahi@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, Sven Peter <sven@kernel.org>
Subject: [PATCH v2 10/22] usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x
Date: Sat, 06 Sep 2025 15:43:23 +0000 [thread overview]
Message-ID: <20250906-atcphy-6-17-v2-10-52c348623ef6@kernel.org> (raw)
In-Reply-To: <20250906-atcphy-6-17-v2-0-52c348623ef6@kernel.org>
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/usb/typec/tipd/core.c | 80 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 76 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 51b0f3be8b66a743ddc3ea96c1b25f597a1e8f6c..afd11b3e1ae596c7f3283e4336aaa57874c9378d 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -35,14 +35,18 @@
#define TPS_REG_INT_MASK2 0x17
#define TPS_REG_INT_CLEAR1 0x18
#define TPS_REG_INT_CLEAR2 0x19
-#define TPS_REG_SYSTEM_POWER_STATE 0x20
#define TPS_REG_STATUS 0x1a
+#define TPS_REG_SYSTEM_POWER_STATE 0x20
+#define TPS_REG_USB4_STATUS 0x24
#define TPS_REG_SYSTEM_CONF 0x28
#define TPS_REG_CTRL_CONF 0x29
#define TPS_REG_BOOT_STATUS 0x2D
#define TPS_REG_POWER_STATUS 0x3f
#define TPS_REG_PD_STATUS 0x40
#define TPS_REG_RX_IDENTITY_SOP 0x48
+#define TPS_REG_CF_VID_STATUS 0x5e
+#define TPS_REG_DP_SID_STATUS 0x58
+#define TPS_REG_INTEL_VID_STATUS 0x59
#define TPS_REG_DATA_STATUS 0x5f
#define TPS_REG_SLEEP_CONF 0x70
@@ -85,6 +89,31 @@ struct tps6598x_rx_identity_reg {
struct usb_pd_identity identity;
} __packed;
+/* TPS_REG_USB4_STATUS */
+struct tps6598x_usb4_status_reg {
+ u8 mode_status;
+ __le32 eudo;
+ __le32 unknown;
+} __packed;
+
+/* TPS_REG_DP_SID_STATUS */
+struct tps6598x_dp_sid_status_reg {
+ u8 mode_status;
+ __le32 status_tx;
+ __le32 status_rx;
+ __le32 configure;
+ __le32 mode_data;
+} __packed;
+
+/* TPS_REG_INTEL_VID_STATUS */
+struct tps6598x_intel_vid_status_reg {
+ u8 mode_status;
+ __le32 attention_vdo;
+ __le16 enter_vdo;
+ __le16 device_mode;
+ __le16 cable_mode;
+} __packed;
+
/* Standard Task return codes */
#define TPS_TASK_TIMEOUT 1
#define TPS_TASK_REJECTED 3
@@ -121,6 +150,7 @@ struct tipd_data {
int (*apply_patch)(struct tps6598x *tps);
int (*init)(struct tps6598x *tps);
int (*switch_power_state)(struct tps6598x *tps, u8 target_state);
+ bool (*read_data_status)(struct tps6598x *tps);
int (*reset)(struct tps6598x *tps);
};
@@ -151,6 +181,10 @@ struct tps6598x {
struct cd321x {
struct tps6598x tps;
+
+ struct tps6598x_dp_sid_status_reg dp_sid_status;
+ struct tps6598x_intel_vid_status_reg intel_vid_status;
+ struct tps6598x_usb4_status_reg usb4_status;
};
static enum power_supply_property tps6598x_psy_props[] = {
@@ -505,6 +539,41 @@ static bool tps6598x_read_data_status(struct tps6598x *tps)
return true;
}
+static bool cd321x_read_data_status(struct tps6598x *tps)
+{
+ struct cd321x *cd321x = container_of(tps, struct cd321x, tps);
+ int ret;
+
+ ret = tps6598x_read_data_status(tps);
+ if (ret < 0)
+ return false;
+
+ if (tps->data_status & TPS_DATA_STATUS_DP_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_DP_SID_STATUS,
+ &cd321x->dp_sid_status, sizeof(cd321x->dp_sid_status));
+ if (ret)
+ dev_err(tps->dev, "Failed to read DP SID Status: %d\n",
+ ret);
+ }
+
+ if (tps->data_status & TPS_DATA_STATUS_TBT_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_INTEL_VID_STATUS,
+ &cd321x->intel_vid_status, sizeof(cd321x->intel_vid_status));
+ if (ret)
+ dev_err(tps->dev, "Failed to read Intel VID Status: %d\n", ret);
+ }
+
+ if (tps->data_status & CD321X_DATA_STATUS_USB4_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_USB4_STATUS,
+ &cd321x->usb4_status, sizeof(cd321x->usb4_status));
+ if (ret)
+ dev_err(tps->dev,
+ "Failed to read USB4 Status: %d\n", ret);
+ }
+
+ return true;
+}
+
static bool tps6598x_read_power_status(struct tps6598x *tps)
{
u16 pwr_status;
@@ -565,7 +634,7 @@ static irqreturn_t cd321x_interrupt(int irq, void *data)
goto err_unlock;
if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_unlock;
/* Handle plug insert or removal */
@@ -614,7 +683,7 @@ static irqreturn_t tps25750_interrupt(int irq, void *data)
goto err_clear_ints;
if (event[0] & TPS_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_clear_ints;
/*
@@ -688,7 +757,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
goto err_unlock;
if ((event1[0] | event2[0]) & TPS_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_unlock;
/* Handle plug insert or removal */
@@ -1534,6 +1603,7 @@ static const struct tipd_data cd321x_data = {
.trace_power_status = trace_tps6598x_power_status,
.trace_status = trace_tps6598x_status,
.init = cd321x_init,
+ .read_data_status = cd321x_read_data_status,
.reset = cd321x_reset,
.switch_power_state = cd321x_switch_power_state,
};
@@ -1550,6 +1620,7 @@ static const struct tipd_data tps6598x_data = {
.trace_status = trace_tps6598x_status,
.apply_patch = tps6598x_apply_patch,
.init = tps6598x_init,
+ .read_data_status = tps6598x_read_data_status,
.reset = tps6598x_reset,
};
@@ -1565,6 +1636,7 @@ static const struct tipd_data tps25750_data = {
.trace_status = trace_tps25750_status,
.apply_patch = tps25750_apply_patch,
.init = tps25750_init,
+ .read_data_status = tps6598x_read_data_status,
.reset = tps25750_reset,
};
--
2.34.1
next prev parent reply other threads:[~2025-09-06 15:43 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-06 15:43 [PATCH v2 00/22] Apple Silicon USB3 support Sven Peter
2025-09-06 15:43 ` [PATCH v2 01/22] dt-bindings: usb: Add Apple dwc3 Sven Peter
2025-09-07 9:45 ` Krzysztof Kozlowski
2025-09-06 15:43 ` [PATCH v2 02/22] usb: dwc3: dwc3_power_off_all_roothub_ports: Use ioremap_np when required Sven Peter
2025-09-11 1:37 ` Thinh Nguyen
2025-09-06 15:43 ` [PATCH v2 03/22] usb: dwc3: glue: Allow more fine grained control over mode switches Sven Peter
2025-09-19 21:40 ` Thinh Nguyen
2025-09-20 11:48 ` Sven Peter
2025-09-24 22:49 ` Thinh Nguyen
2025-09-06 15:43 ` [PATCH v2 04/22] usb: dwc3: Add Apple Silicon DWC3 glue layer driver Sven Peter
2025-09-11 1:46 ` Thinh Nguyen
2025-09-19 22:40 ` Thinh Nguyen
2025-09-21 13:40 ` Sven Peter
2025-09-24 22:36 ` Thinh Nguyen
2025-09-06 15:43 ` [PATCH v2 05/22] usb: typec: tipd: Clear interrupts first Sven Peter
2025-09-06 15:43 ` [PATCH v2 06/22] usb: typec: tipd: Move initial irq mask to tipd_data Sven Peter
2025-09-06 15:43 ` [PATCH v2 07/22] usb: typec: tipd: Move switch_power_state " Sven Peter
2025-09-06 15:43 ` [PATCH v2 08/22] usb: typec: tipd: Trace data status for CD321x correctly Sven Peter
2025-09-06 15:43 ` [PATCH v2 09/22] usb: typec: tipd: Add cd321x struct with separate size Sven Peter
2025-09-06 15:43 ` Sven Peter [this message]
2025-09-09 9:41 ` [PATCH v2 10/22] usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x Heikki Krogerus
2025-09-06 15:43 ` [PATCH v2 11/22] usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes " Sven Peter
2025-09-09 9:47 ` Heikki Krogerus
2025-09-06 15:43 ` [PATCH v2 12/22] usb: typec: tipd: Update partner identity when power status was updated Sven Peter
2025-09-07 8:54 ` Sergey Shtylyov
2025-09-07 18:59 ` Sven Peter
2025-09-06 15:43 ` [PATCH v2 13/22] usb: typec: tipd: Use read_power_status function in probe Sven Peter
2025-09-09 9:56 ` Heikki Krogerus
2025-09-06 15:43 ` [PATCH v2 14/22] usb: typec: tipd: Read data status in probe and cache its value Sven Peter
2025-09-09 10:02 ` Heikki Krogerus
2025-09-09 10:03 ` Heikki Krogerus
2025-09-06 15:43 ` [PATCH v2 15/22] usb: typec: tipd: Handle mode transitions for CD321x Sven Peter
2025-09-09 10:10 ` Heikki Krogerus
2025-09-11 9:26 ` Janne Grunau
2025-09-06 15:43 ` [PATCH v2 16/22] dt-bindings: phy: Add Apple Type-C PHY Sven Peter
2025-09-09 17:04 ` Rob Herring
2025-09-06 15:43 ` [PATCH v2 17/22] soc: apple: Add hardware tunable support Sven Peter
2025-09-07 12:46 ` Alyssa Anne Rosenzweig
2025-09-06 15:43 ` [PATCH v2 18/22] phy: apple: Add Apple Type-C PHY Sven Peter
2025-09-07 13:12 ` Alyssa Anne Rosenzweig
2025-09-07 13:15 ` Alyssa Anne Rosenzweig
2025-09-08 15:04 ` Philipp Zabel
2025-09-08 18:12 ` Janne Grunau
2025-09-09 22:25 ` Nathan Chancellor
2025-09-06 15:43 ` [PATCH v2 19/22] arm64: dts: apple: t8103: Mark ATC USB AON domains as always-on Sven Peter
2025-09-06 15:43 ` [PATCH v2 20/22] arm64: dts: apple: t8103: Add Apple Type-C PHY and dwc3 nodes Sven Peter
2025-09-07 9:47 ` Krzysztof Kozlowski
2025-09-07 12:43 ` Alyssa Anne Rosenzweig
2025-09-07 12:51 ` Greg Kroah-Hartman
2025-09-07 15:01 ` Krzysztof Kozlowski
2025-09-07 19:02 ` Sven Peter
2025-09-06 15:43 ` [PATCH v2 21/22] arm64: dts: apple: t8112: " Sven Peter
2025-09-06 15:43 ` [PATCH v2 22/22] arm64: dts: apple: t600x: " Sven Peter
2025-09-11 10:10 ` [PATCH v2 00/22] Apple Silicon USB3 support Neal Gompa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250906-atcphy-6-17-v2-10-52c348623ef6@kernel.org \
--to=sven@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=balbi@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=j@jannau.net \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=neal@gompa.dev \
--cc=p.zabel@pengutronix.de \
--cc=peter.chen@nxp.com \
--cc=ran.wang_1@nxp.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).