[PATCH v2 02/22] usb: dwc3: dwc3_power_off_all_roothub_ports: Use ioremap_np when required

[Sven Peter <sven@kernel.org>]

On Apple Silicon machines we can't use ioremap() / Device-nGnRE to map most
regions but must use ioremap_np() / Device-nGnRnE whenever
IORESOURCE_MEM_NONPOSTED is set. Make sure this is also done inside
dwc3_power_off_all_roothub_ports to prevent SErrors.

Fixes: 2d2a3349521d ("usb: dwc3: Add workaround for host mode VBUS glitch when boot")
Cc: stable@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
---
 drivers/usb/dwc3/host.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 1c513bf8002ec9ec91b41bfd096cbd0da1dd2d2e..e77fd86d09cf0a36161c20ad3c83f10e67099775 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -37,7 +37,10 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
 
 	/* xhci regs are not mapped yet, do it temporarily here */
 	if (dwc->xhci_resources[0].start) {
-		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+		if (dwc->xhci_resources[0].flags & IORESOURCE_MEM_NONPOSTED)
+			xhci_regs = ioremap_np(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+		else
+			xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
 		if (!xhci_regs) {
 			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
 			return;

-- 
2.34.1