From: Chen-Yu Tsai <wens@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Andre Przywara <andre.przywara@arm.com>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Subject: [PATCH net-next v3 05/10] arm64: dts: allwinner: a523: Add GMAC200 ethernet controller
Date: Sat, 6 Sep 2025 12:13:28 +0800 [thread overview]
Message-ID: <20250906041333.642483-6-wens@kernel.org> (raw)
In-Reply-To: <20250906041333.642483-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
The A523 SoC family has a second ethernet controller, called the
GMAC200. It is not exposed on all the SoCs in the family.
Add a device node for it. All the hardware specific settings are from
the vendor BSP.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Changes since v1:
- Fixed typo in tx-queues-config
---
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 6b6f2296bdff..449bcafbddcd 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -180,6 +180,16 @@ rgmii0_pins: rgmii0-pins {
bias-disable;
};
+ rgmii1_pins: rgmii1-pins {
+ pins = "PJ0", "PJ1", "PJ2", "PJ3", "PJ4",
+ "PJ5", "PJ6", "PJ7", "PJ8", "PJ9",
+ "PJ11", "PJ12", "PJ13", "PJ14", "PJ15";
+ allwinner,pinmux = <5>;
+ function = "gmac1";
+ drive-strength = <40>;
+ bias-disable;
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
allwinner,pinmux = <2>;
@@ -601,6 +611,51 @@ mdio0: mdio {
};
};
+ gmac1: ethernet@4510000 {
+ compatible = "allwinner,sun55i-a523-gmac200",
+ "snps,dwmac-4.20a";
+ reg = <0x04510000 0x10000>;
+ clocks = <&ccu CLK_BUS_EMAC1>, <&ccu CLK_MBUS_EMAC1>;
+ clock-names = "stmmaceth", "mbus";
+ resets = <&ccu RST_BUS_EMAC1>;
+ reset-names = "stmmaceth";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins>;
+ power-domains = <&pck600 PD_VO1>;
+ syscon = <&syscon>;
+ snps,fixed-burst;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+
+ queue0 {};
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <256 128 64 32 16 8 4>;
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+
+ queue0 {};
+ };
+ };
+
ppu: power-controller@7001400 {
compatible = "allwinner,sun55i-a523-ppu";
reg = <0x07001400 0x400>;
--
2.39.5
next prev parent reply other threads:[~2025-09-06 4:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-06 4:13 [PATCH net-next v3 00/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 01/10] dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 02/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-06 21:15 ` kernel test robot
2025-09-06 4:13 ` [PATCH net-next v3 03/10] soc: sunxi: sram: add entry for a523 Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 04/10] soc: sunxi: sram: register regmap as syscon Chen-Yu Tsai
2025-09-06 4:13 ` Chen-Yu Tsai [this message]
2025-09-06 4:13 ` [PATCH net-next v3 06/10] arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-08 13:45 ` Jernej Škrabec
2025-09-06 4:13 ` [PATCH net-next v3 07/10] arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 08/10] arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 09/10] arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port Chen-Yu Tsai
2025-09-06 4:13 ` [PATCH net-next v3 10/10] arm64: dts: allwinner: t527: orangepi-4a: Enable " Chen-Yu Tsai
2025-09-06 7:30 ` arm64: allwinner: a523: Enable MCU PRCM and NPU Muhammed Subair
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250906041333.642483-6-wens@kernel.org \
--to=wens@kernel.org \
--cc=andre.przywara@arm.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jernej.skrabec@gmail.com \
--cc=jernej@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).