[PATCH v3 3/3] arm64: dts: qcom: Add missing TCSR ref clock to the DP PHYs

[Abel Vesa <abel.vesa@linaro.org>]

The DP PHYs on X1E80100 need the ref clock which is provided by the
TCSR CC.

The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.

So lets attach it to each of the DP PHYs in order to do that.

Cc: stable@vger.kernel.org # v6.9
Fixes: 1940c25eaa63 ("arm64: dts: qcom: x1e80100: Add display nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 737c5dbd1c808300041cc8897ca1f7450e16e019..551fa270e6ecbe6462ebc1736a36be65534d3ae0 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5670,9 +5670,11 @@ mdss_dp2_phy: phy@aec2a00 {
 			      <0 0x0aec2000 0 0x1c8>;
 
 			clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
-				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&tcsr TCSR_EDP_CLKREF_EN>;
 			clock-names = "aux",
-				      "cfg_ahb";
+				      "cfg_ahb",
+				      "ref";
 
 			power-domains = <&rpmhpd RPMHPD_MX>;
 
@@ -5690,9 +5692,11 @@ mdss_dp3_phy: phy@aec5a00 {
 			      <0 0x0aec5000 0 0x1c8>;
 
 			clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
-				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&tcsr TCSR_EDP_CLKREF_EN>;
 			clock-names = "aux",
-				      "cfg_ahb";
+				      "cfg_ahb",
+				      "ref";
 
 			power-domains = <&rpmhpd RPMHPD_MX>;
 

-- 
2.45.2