From: Chen-Yu Tsai <wens@kernel.org>
To: Stephen Boyd <sboyd@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>
Cc: Andre Przywara <andre.przywara@arm.com>,
linux-sunxi@lists.linux.dev, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/7] arm64: dts: allwinner: a523: Add MCU PRCM CCU node
Date: Fri, 12 Sep 2025 01:47:09 +0800 [thread overview]
Message-ID: <20250911174710.3149589-7-wens@kernel.org> (raw)
In-Reply-To: <20250911174710.3149589-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie.org>
Add a device node for the third supported clock controller found in the
A523 / T527 SoCs. This controller has clocks and resets for the RISC-V
MCU, and others peripherals possibly meant to operate in low power mode
driven by the MCU, such as audio interfaces, an audio DSP, and the NPU.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Changes since v1:
- Enlarged MCU PRCM register range to 0x200
- Moved "r-ahb" clock to the end of the list and added "r-apb0" clock
---
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 79bd9ce08c7c..f93376372aba 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -4,8 +4,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
@@ -825,6 +827,31 @@ rtc: rtc@7090000 {
clock-names = "bus", "hosc", "ahb";
#clock-cells = <1>;
};
+
+ mcu_ccu: clock-controller@7102000 {
+ compatible = "allwinner,sun55i-a523-mcu-ccu";
+ reg = <0x7102000 0x200>;
+ clocks = <&osc24M>,
+ <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_AUDIO0_4X>,
+ <&ccu CLK_PLL_PERIPH0_300M>,
+ <&ccu CLK_DSP>,
+ <&ccu CLK_MBUS>,
+ <&r_ccu CLK_R_AHB>,
+ <&r_ccu CLK_R_APB0>;
+ clock-names = "hosc",
+ "losc",
+ "iosc",
+ "pll-audio0-4x",
+ "pll-periph0-300m",
+ "dsp",
+ "mbus",
+ "r-ahb",
+ "r-apb0";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
thermal-zones {
--
2.39.5
next prev parent reply other threads:[~2025-09-11 17:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 17:47 [PATCH v2 0/7] arm64: allwinner: a523: Enable MCU PRCM and NPU Chen-Yu Tsai
2025-09-11 17:47 ` [PATCH v2 1/7] dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock Chen-Yu Tsai
2025-09-11 17:47 ` [PATCH v2 2/7] dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller Chen-Yu Tsai
2025-09-11 17:47 ` [PATCH v2 3/7] clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock Chen-Yu Tsai
2025-09-11 18:07 ` Jernej Škrabec
2025-09-12 10:19 ` Andre Przywara
2025-09-11 17:47 ` [PATCH v2 4/7] clk: sunxi-ng: div: support power-of-two dividers Chen-Yu Tsai
2025-09-11 18:08 ` Jernej Škrabec
2025-09-11 17:47 ` [PATCH v2 5/7] clk: sunxi-ng: add support for the A523/T527 MCU CCU Chen-Yu Tsai
2025-09-11 18:45 ` Jernej Škrabec
2025-09-11 17:47 ` Chen-Yu Tsai [this message]
2025-09-11 18:46 ` [PATCH v2 6/7] arm64: dts: allwinner: a523: Add MCU PRCM CCU node Jernej Škrabec
2025-09-11 17:47 ` [PATCH v2 7/7] arm64: dts: allwinner: a523: Add NPU device node Chen-Yu Tsai
2025-09-11 18:46 ` Jernej Škrabec
2025-09-13 5:55 ` [PATCH v2 0/7] arm64: allwinner: a523: Enable MCU PRCM and NPU Chen-Yu Tsai
2025-09-13 5:55 ` Chen-Yu Tsai
2025-09-13 6:16 ` (subset) " Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250911174710.3149589-7-wens@kernel.org \
--to=wens@kernel.org \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox