Re: [PATCH v3 02/10] dt-bindings: fsl,fpga-qixis-i2c: add support for LX2160ARDB FPGA

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3840 bytes --]

On Wed, Sep 17, 2025 at 12:04:14PM +0300, Ioana Ciornei wrote:
> Extend the list of supported compatible strings with fsl,lx2160ardb-fpga.
> 
> Since the register map exposed by the LX2160ARDB's FPGA also contains
> two GPIO controllers, accept the necessary GPIO pattern property.
> At the same time, add the #address-cells and #size-cells properties as
> valid ones so that the child nodes of the fsl,lx2160ardb-fpga node are
> addressable.
> 
> This is necessary because when defining child devices such as the GPIO
> controller described in the added example, the child device needs a the
> reg property to properly identify its register location in the parent
> I2C device address space.
> 
> Impose this restriction for the new compatible through an if-statement.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> ---
> Changes in v2:
> - Enforce a unit address on the child gpios nodes (remove the ?)
> - Enforce the use of unit addresses by having #address-size and
>   #size-cells only for the newly added fsl,lx2160ardb-fpga compatible
> Changes in v3:
> - Replace the trivial-gpio reference with an explicit mention of the
>   accepted child gpio compatible.
> - Reword the commit message.
> - Add the 'else' case to the if statement.
> 
>  .../bindings/board/fsl,fpga-qixis-i2c.yaml    | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> index 28b37772fb65..e889dac052e7 100644
> --- a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> @@ -22,6 +22,13 @@ properties:
>                - fsl,lx2160aqds-fpga
>            - const: fsl,fpga-qixis-i2c
>            - const: simple-mfd
> +      - const: fsl,lx2160ardb-fpga

How come this is not compatible with fsl,fpga-qixis-i2c ? Seems like
that device has a feature subset of that one, given your changes here.

> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
>  
>    interrupts:
>      maxItems: 1
> @@ -32,10 +39,37 @@ properties:
>    mux-controller:
>      $ref: /schemas/mux/reg-mux.yaml
>  
> +patternProperties:
> +  "^gpio@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        contains:
> +          enum:
> +            - fsl,lx2160ardb-fpga-gpio-sfp
> +
>  required:
>    - compatible
>    - reg
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,lx2160ardb-fpga
> +    then:
> +      required:
> +        - "#address-cells"
> +        - "#size-cells"
> +    else:
> +      properties:
> +        "#address-cells": false
> +        "#size-cells": false
> +
>  additionalProperties: false
>  
>  examples:
> @@ -68,3 +102,27 @@ examples:
>          };
>      };
>  
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        board-control@66 {
> +            compatible = "fsl,lx2160ardb-fpga";
> +            reg = <0x66>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            gpio@19 {
> +                compatible = "fsl,lx2160ardb-fpga-gpio-sfp";
> +                reg = <0x19>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-line-names =
> +                    "SFP2_TX_EN", "",
> +                    "", "",
> +                    "SFP2_RX_LOS", "SFP2_TX_FAULT",
> +                    "", "SFP2_MOD_ABS";
> +            };
> +        };
> +    };
> -- 
> 2.25.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]